POWERTEC 71609-P4 T-spor skæringssæt, 4 sæt

Brand:POWERTEC

4/5

kr
464.55

Vi præsenterer T-Track Intersection Kit fra POWERTEC. Dette 4-delte skæringssæt giver dig mulighed for at installere flere t-track konfigurationer og optimere dine t-track jigs og armaturer. Når det er samlet, danner dette praktiske sæt to vinkelrette spor (kryds), hvilket giver dig mulighed for at skubbe dine jigs og armaturer i næsten alle retninger. Hvert spor (3/4" bredde) har en 90-graders vinkel i den ene ende, der passer præcist med sine tre matchende komponenter til at danne et perfekt kryds. Den er lavet af præcisionsbearbejdet, korrosionsbestandigt anodiseret aluminium for optimal holdbarhed, bearbejdning og præcision. Det er det perfekte værktøj, når du skal bygge eller lave borde, jigs og inventar. Udstyret med forborede huller vil du finde denne genstand, som er enkel at installere, hurtig at justere og endnu nemmere at bruge. Nu kan du bevæge dig rundt og konfigurere dine t-track komponenter, såsom klemmer, hold-downs, stop og mere, i stort set alle retninger, så de passer til dine projektkrav. Med et strejf af fantasi, dygtighed og kreativitet er mulighederne ubegrænsede med dette essentielle sæt. Individuelle sporspecifikationer * Længde: 3 tommer * Bredde: ¾ tommer * Dybde: 3/8 tommer POWERTEC er en førende producent af højkvalitets træbearbejdningsværktøj og tilbehør, maskiner og et udvalg af OEM-reservedele. Vi er forpligtet til at overgå forventningerne og samtidig bringe de nyeste innovationer, teknologi og produktudvikling til industrien.

Beløb

Tilføj til kurv Køb nu

EAN: 0843441119951

Kategorier Værktøj og boligforbedring, Værktøj & Håndværktøj, Elektroværktøjsdele og tilbehør, Jig-tilbehør,

LET AT INSTALLERE: Båndene er designet til at flugte med bordet og har forborede monteringshuller. PREMIUM BYGNING: Konstrueret af anodiseret aluminium, dette t-spor skæringssæt er designet til langsigtet holdbarhed, samtidig med at det leverer optimal slidstyrke og naturlig korrosionsbeskyttelse. KOMPATIBILITET: Designet til at arbejde med POWERTEC Universal T-Track og rummer 1/4" t-bolte, 5/16" t-bolte og 1/4" sekskantede bolte for effektivt at udvide anvendeligheden af din arbejdsbordssamling. FUNKTION: Giver dig mulighed for at installere din t-track-samling i en række forskellige konfigurationer, ved at skubbe dine jigs og armaturer i en række forskellige retninger. INKLUDERER: (4) T-Tracks Woodworking Intersection Kit, indeholdende 16 stk. t-track segmenter i alt.

Batteries Required?	‎No
Country of Origin	‎Taiwan
Customer Reviews	4.9 4.9 out of 5 stars 39 ratings 4.9 out of 5 stars
Included Components	‎
Item model number	‎71609-P4
Item Package Quantity	‎1
Item Weight	‎10.4 ounces
Manufacturer	‎POWERTEC
Material	‎Aluminum
Package Dimensions	‎7.48 x 6.89 x 2.01 inches
Part Number	‎71609-P4

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Laird

Time saver and cut perfectly

Makes installing T-track much easier and saves a ton of time! You could always miter all the pieces yourself but the time it would take is way more valuable than the few bucks it costs to purchase these perfectly cut intersections. I am still finishing up the install of the powertec universal T-track but I have been wanting to do this for a while. Being able to secure your workpiece is obviously critical and I find myself having to spend way too much time trying to clamp or secure via whatever means available. This system should enable me to dog down workpieces in almost no time at all. I have a slab flattening jig that rolls over the table also so the track system should have endless value. Update… I forgot to mention that you should remember to take into consideration the impact on measuring if you are going to use precut intersections. The ones from Powertec (which I would highly recommend without any compensation or gift etc to say) are a total of six additional inches in each direction. That means you will have much shorter lengths of track than you might expect. e.g. the track between T’s in one direction on my setup is only 7 inches because the precut intersections add a total of 6 more. This means I have 13 inches between the center of the track . Love it!

Scritto da: Doug Kelly

Almost Perfect and Less Money

Well, nothing is really perfect. However, the Powertec T-track intersection kit comes mighty close. On the recommendations of several other YouTube wood workers, I bought these, the 4 foot and 2 foot tracks and hold downs from Powertec. I was very impressed with the fit and finish quality, but noticed some slight color differences in the track sections (not all the same shade of blue. A very minor annoyance. Great product at a great price!

Scritto da: Robert Johnson

Works nicely, a little finicky

Based on the pictures I was expecting a single cross piece. But, what it really is is four individual pieces with 45° points. When you put those four pieces together, you get the cross. That means using a square to get everything aligned, which isn't a problem, just a little more finicky than I expected.

Scritto da: fvg

Use a 3/8” key stock to maintain alignment when installing segments. Glue and screw in place.

A lot of work but has been a worth while endeavor.

Scritto da: burnsy

Exceptional and economical.

Much better value than Rockler and accepts larger screw.

Scritto da: Spoon

Good addition to a Table

I decided to make my own portable work surface with t-tracks and dog holes and decided on these for use with the track assembly. Used in conjunction with PowerTec straight t-track to assemble a 2 x 4 foot table that I can toss on a couple of saw horses when I need some extra play area. These were all excellent quality and the same size, making is easy to square off everything. No screws came with them, so you'll need the appropriate screws for your table thickness. A good choice and less than similar items from many other vendors.