POWERTEC 71643 Twin Pocket Hole Jig til træbearbejdning m/støvsamleradapter

Name: POWERTEC 71643 Twin Pocket Hole Jig til træbearbejdning m/støvsamleradapter
Brand: POWERTEC
SKU: 0843441113348
Price: 358.72 DKK
Availability: InStock

Brand:POWERTEC

3.5/5

kr
358.72

Vi præsenterer Twin Pocket Hole Jig Set fra POWERTEC. Dette komplette sæt, designet til præcis boring af side-by-side lommehuller på både nye projekter og reparationer, giver dig mulighed for at gøre netop det. Jiggens unikke støvopsamlingssystem gør den til en hurtig, ren og enkel betjening, utvivlsomt et af de enkleste og mest effektive lommehulsjiggsystemer, der findes i dag. Med sit tilpasningsdygtige basissystem hjælper dette alsidige værktøj dig med lethed at måle tykkelsen af dit træ. Twin Pocket Hole Jig-sættet er perfekt til dit næste projekt, uanset om du er træarbejder, professionel tømrer eller gør-det-selv-entusiast. * Hurtig opsætning & nemme justeringer til forskellige komponentstørrelser * Ideel til samling i hårdt træ, blødt træ og pladematerialer * Drejelig støvopsamleradapter giver spån- og støvfri drift * Brug dobbelte lommer til at bore to huller for øget styrke eller enkelte huller til smallere komponenter * Fuld længde hærdede borestyr til præcisionslommer og lang levetid * Multifunktionsdesign til reparationer, små projekter og konstruktion * Indbygget emnetykkelse, boredybdeindstilling og opsætningsmåler Pakken indeholder(1) Jig(1) Bor (1) Stopkrave(1) Sekskantnøgle(1) R2 Bit Driver(1) StøvopsamleradapterPOWERTEC er en førende producent af højkvalitets træbearbejdningsværktøj og tilbehør, maskiner og et udvalg af OEM-reservedele. Vi er forpligtet til at overgå forventningerne og samtidig bringe de nyeste innovationer, teknologi og produktudvikling til industrien.

Beløb

Tilføj til kurv Køb nu

EAN: 0843441113348

Kategorier Værktøj og boligforbedring, Værktøj & Håndværktøj, Elektroværktøjsdele og tilbehør, Jig-tilbehør,

PREMIUM: Kraftige stålborestyr er rustfrie og giver langvarig brug. LET AT BRUGE: Nem at sætte op og bruge med stop, jig gør denne proces enkel, holder målingerne præcise og opnår smukke lommesamlinger. DESIGNFUNKTIONER: Twin Pocket Hole Jig er designet til at tillade nøjagtig boring af side om side lommehuller med en støvopsamleradapter til spånfri drift (Designet til at arbejde med POWERTEC 70257/ 70355/ 70356 Universal Small Port Hose Kit (valgfrit tilbehør)) . FUNKTION: Når du samler hårdt, blødt eller krydsfiner, skaber det træbearbejdningshuller med høj præcision og stærke sikre samlinger på få sekunder - hvilket giver hurtig og enkel betjening. INKLUDERER: (1) Twin Pocket Hole Jig Kit med bor, stopkrave, støvopsamleradapter, R2 driver bit og unbrakonøgle.

Batteries Required?	‎No
Country of Origin	‎Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 750 ratings 4.5 out of 5 stars
Included Components	‎INCLUDES:
Item model number	‎71643
Item Package Quantity	‎1
Item Weight	‎9.5 ounces
Manufacturer	‎POWERTEC
Part Number	‎71643
Product Dimensions	‎7.5 x 2.75 x 1.75 inches
Style	‎Twin Pocket Hole Jig

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Zack Tyhurst

Decent Option for the Cost

I was able to use it for installing dowels into a woodworking project, but my main complaint is the acrylic flap that you use to clamp it to the side of your board is a little bit more flexible than I would like. You have to be careful while drilling or it will wander.

Scritto da: Debbie

Very good but limited

This worked okay for dowels on the edges of boards, but has virtually no use for surface dowelling. You will need to clamp this device TIGHTLY to your board, since it has a tendency to want to move.

Scritto da: Chad and Serra Hadsell

Great kit and well priced, but mine was missing the 1/4" drill bit

This kit has been great so far, and a pretty good value for the money. Fortunately, I don't yet have a use for the 1/4" doweling jig, because my kit is missing the 1/4" drill bit. So, minus one star for the missing bit. But that will be easy enough to replace if and when I need it.

Scritto da: A.A. Ron

Good for the money

This dowel jig definitely helped keep my boards in alignment when I was making a table top glue up. My only problem was the plexiglass part can flex so on a few spots the whole was out of alignment with the adjoining board. I moved the clamp closer to the black plastic part. Maybe it is a learning curve issue. There are more robust dowel jigs, but this will get you pretty far for $20.

Scritto da: Eric Lee

Works Great

Used to make a rustic coffee table. Worked well. I used a basic grip clamp to hold it in place while drilling.

Scritto da: Amazon Customer

Gets the Job down

Just clamp this down when you are drilling dowels. You can get away will holding it but I prefer to be safer rather than sorry. Quick and easy to use.

Scritto da: Mike R.

Don't drop it!

This jig is very breakable. One slip onto a concrete floor and it's toast!

Scritto da: brianb

clamp it and go.

Was making a Murphy bed cabinet for a rockler kit. had a tough time aligning dowels with the milescraft doweling jig I had bought. Ended up buying this and was able to get all the dowels aligned on the first try. This worked great for the edge dowels. Ended up using the milescraft jig on the faces since this is very awkward to clamp on a larger board. overall, using this and the included bit for edges, and the milescraft and it's included bit for the faces makes doweling very easy and fast. I am an extreme novice when it comes to this stuff. I tried to build this cabinet with the least amount of tools possible.

Scritto da: TC

Arrived not in original packaging

Mine arrived in a taped up plastic parts bag, with the drill bit (collar attached) jammed into one of the holes and missing the allan key. The collar scratched up the plastic, only cosmetic damage but still irritating. I had also ordered the 3/8" size and it arrived (separately) in proper packaging and with all parts in excellent condition - possibly different seller? Its going to work, and I have plenty of allan keys including the one that came with the other size but it was a bit disappointing after the good job done on the other size. Contrary to some other reviews I find the fit of bit to guide is very good, just enough play to ensure no binding of the bit. Test joints work well. Not the best jig I've ever used but by no means the worst. Lower rating is purely for the bad packaging and the cosmetic damage it caused (suspect it was a returned unit sent out as new)

Scritto da: Richard Poulin

Works well

I'm not an experienced woodworker. And I've started using this guide on a project with maple... quite hard. I still managed to drill my holes, but the jig does need some practice. Sometimes, the drill jams. But it's not the tool. The tool is sturdy and well made.

Scritto da: tigabec

Can't recommend. Holes not aligned!

Can you believe selling a drilling jig that don't have the holes aligned properly? Might as well save your money and drill without a tool if the result is unaligned holes!!!

Scritto da: Jesús R

Mejor de lo esperado

La verdad las plantitas está muy bien fabricadas.. es metal con acrílico de muy buen espeso..los topes tienen un sistema de ajuste diferente a los normales. Muy precisa al realizar los ensambles.

Scritto da: Doug B.

Accuracy and value get 1 star because I can not go to negative stars

Once the holes are drilled, they are offline by 1/64. I just bought an $80 paperweight. In case you are wondering the center line on the jig was perfectly aligned on my scribe line on the test pieces.