CURT 56078 Køretøjsside tilpasset 4-benet trailerledningsnet, passer til udvalgte Hyundai Santa Fe, Kia Forte, Sort

Name: CURT 56078 Køretøjsside tilpasset 4-benet trailerledningsnet, passer til udvalgte Hyundai Santa Fe, Kia Forte, Sort
Brand: Curt Manufacturing
SKU: 0612314560783
Price: 719.49 DKK
Availability: InStock

Brand:Curt Manufacturing

3.6/5

kr
719.49

Hvis dit køretøj ikke er udstyret med ledninger til at trække en trailer, er CURT brugerdefinerede ledninger den ideelle løsning. Et brugerdefineret ledningsnet - også kaldet et T-stik - er en enkel, plug-and-play elektrisk enhed, der tilsluttes dit bilelektriske system og giver en standard, universel anhængerledningsforbindelse. Dette gøres ved hjælp af to eller flere køretøjsspecifikke, OEM-kompatible stik til at tilslutte til baglygtesamlingen, hvilket eliminerer behovet for skæring, splejsning og lodning under installationen. Brugerdefinerede ledningsnet er gjort køretøjsspecifikke, og selvom de ikke er tilgængelige til alle køretøjer, tilbyder de en af de hurtigste, nemmeste og sikreste måder at forbinde et køretøj til bugsering. Denne særlige plug-in-sele giver en 4-vejs flad stikdåse og er designet til at være et brugerdefineret ledningsnet, der passer til visse årgange af Hyundai Santa Fe og Kia Forte (for at verificere dit køretøjs kompatibilitet, se applikationsinfo). Den leveres med alle nødvendige ledningskomponenter for at etablere en pålidelig anhængerledningsforbindelse, samt et støvdæksel for at holde stikket rent, når det ikke er i brug. Du har et billede i tankerne af din næste destination -- måske er det båden, der lander på dit foretrukne fiskested, måske er det en campingplads, der har udsigt over et af naturens mesterværker, eller måske er det den næste store arbejdsplads. Men at gøre dette billede til en realitet kræver mere end blot at dagdrømme. Det kræver en solid forbindelse og den rigtige mængde strøm. CURT brugerdefinerede ledninger er lavet med noget af den mest sofistikerede teknologi i branchen og er designet til at installere med lethed, hvilket giver dig en langvarig elektrisk forbindelse til dit anhængertræk.

Beløb

Tilføj til kurv Køb nu

EAN: 0612314560783

Kategorier Køretøj, Ersatzdele, Lys & El, Electrical, Wiring Harnesses,

STØVDÆKKE. For at fremme langvarig brug og vejrbestandighed leveres denne 4-polede ledningsnet til trailerbelysning med et gummistøvdæksel. Den passer nemt på det 4-vejs flade stik, når den ikke er i brug, og beskytter den mod udendørs elementer. PÅLIDELIG KRAFT. Dette 4-vejs anhængerledningsnet er bygget med overflademonteringsteknologi. Denne type kredsløb genererer mindre varme, optimal lysintensitet og holdbar ydeevne. KØRETØJSSPECIFIK. Dette eftermarked, køretøj-trailer ledningsnet er designet til udvalgte år af Hyundai Santa Fe og Kia Forte. STANDARD KONTAKT. Denne plug-in 4-flade trailerledning kan bruges til at forbinde trailerbaglygter, bremsesignallys og blinklys. 4-vejs trailerlysledninger er populært på en række forskellige trailere, hvilket tilføjer alsidige bugseringsmuligheder til dit køretøj. LET AT INSTALLERE. Ingen skæring! Ingen splejsning! Dette anhængerledningssæt tilsluttes eksisterende fabriksledninger på dit køretøj og udstyrer det med et standard, bageste 4-bens anhængerledningsstik til at tilslutte og trække en anhænger.

Brand	‎Curt Manufacturing
Country of Origin	‎USA
Customer Reviews	4.5 4.5 out of 5 stars 199 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎56078
Item Weight	‎12.8 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56078
Model	‎Custom Wiring
OEM Part Number	‎56078
Product Dimensions	‎9 x 4 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Jesse D. Smith

Simple install

This was very easy to install. Took me 15 minutes. Quality product for great price.

Scritto da: TbonePhil

Easy to install. In spite of what Amazon garage said, it IS the part for my 2012 Santa Fe

Installation was pretty simple using instructions from Curt. I didn't have to remove the large storage tray or the side panels. I was able to install by removing the small storage compartment, the trim between it and the bumper and the two access panels behind the tail lights (fished the wires up on each side using stiff wire). There is a slot gap in the storage tray I was able to push the connector through and when not using, the harness stores in the storage tray. The wires are heavy enough gage and the seal around the rear hatch is pliable enough that I just feed the harness out the back and close the hatch on it when using. I've used it multiple times over the past 5 years and had no issues whatsoever. Note: as stated in the headline, Amazon says the 56078 harness will not work for my vehicle. The CURT website calls it out and my installation and history with it prove that it is correct.

Scritto da: Dave Gallup

Used, not new as it should have been

3 wires had shrink wrap on them as if they were spliced or cut. The wiring works fine but is obviously not new and the packaging was stapled together. If I wasn’t going out of town for an extended period I would have sent it back.

Scritto da: Paul W

super easy to install

Bought for 2011 Santa Fe. Wire routing was very easy. Did not drill for ground but removed paint at a tail lamp mounting stud and used a star washer under factory mounting nut. Placed wires under (behind) cross brace separating the two storage compartments to insure no pinching or crushing occurred. Did not remove large side trim panels as instructions requested, but "fished" harness up each side (behind large panels) using a coat hanger - plenty of room. Instructions were very clear and well written, including outstanding detail pertaining to actions pertaining to vehicle trim removal. All parts were included. After 40 plus years of towing, it was great to get a truly "plug & play" product. A very minimal time-intensive product - although I tool a little extra time for routing (personal preference, being a ham operator) and making sure I didn't alter wife's vehicle (facing death on three continents didn't scare me as much as her ire :-) )

Scritto da: RobertR

Good instructions came with the kit

This was my 1st installation on a Sante Fe. Good instructions came with the kit, but found a shortcut that eliminated taking the scuff panel and rear trim panels out. For disassembly, did steps A, B, C, & E. Skipped D and F. Used a piece of stiff wire (coat hanger) to fish the T-connector wires from the jack tray cavity up to the open panels from Step E. Used blue painters tape to cover the T-connectors so they didn't snag. Can easily do on both sides - connections were easy. Ran the passenger side wires in the jack cavity. Cut a small notch in the left side of the jack plastic for the wires to come through. Electrically, it all worked as expected.

Scritto da: Bill

so easy, if you can plug a harness in, your halfway there!

Easiest wiring ive ever had to do! Ive wired up hitches many times and never had it this easy. Ive also had wires coming loose, breaking, shorting out, all because of the splicing and mounting under the vehicle. This is designed to mount inside and stay out of the weather and out of sight. You can still run wire through the floor but why expose it so you'll have problems later on with it? Anyway, if you can pull a wire through the panel on each side, remove one nut and attach the ground wire to it, then plug the harness in, then you can install this yourself. There's a video on youtube for installing this too if you want to watch how easy it is.

Scritto da: Michael M.

Unnecessary steps and a poor result

I ordered this with the Curt receiver for my Santa Fe. Didn't really think about it. Curt makes a great product and I really like the receiver. I'd watched enough of the etrailer.com installation video before ordering to see it's connected into the turn signal wiring on both sides. Luckily, before it arrived, I decided to watch the rest but, instead, accidentally pulled up the Tekonsha harnrss video instead, which has you PLUG THEIRS INTO THE FACTORY INSTALLED CONNECTORS UNDER THE VEHICLE. I thought, "WTH?" I went back and finished the video for this one that goes on to have your leave the wire bundle hanging out inside, where they're coiled and tucked into storage when not needed and hanging out, pinched under the closed rear hatch when towing. The Tekonsha is now tywrapped to the receiver, nicely out of sight under my vehicle. As one of my coworkers so eloquently put it, "IDA BEEN PISSED!"

Scritto da: MiCTLaN

Plug and play, worked great

I had this installed in my 2010 Hyundai Santa Fe in about 20 minutes start to finish. I followed their instructions aside from the part about removing the side panels inside the hatch, instead I just fished the cables through with a piece of wire. I drilled a 1" hole in the jack tray, so this coils up nicely in that compartment when it's not in use.

Scritto da: Handy Guy

Makes adding trailer wiring easy

The Curt 56078 trailer wiring harness was a perfect fit for my 2010 Kia Forte EX. It was shipped quickly, arrived well packaged, and was easy to install. Having previously installed trailer wiring in several cars without a vehicle specific plug-in kit like this one, I was very pleased with how well it worked. The T-connectors just plug in to your existing tail light connectors, and the electronics handle the conversion from the separate brake and turn signal lights in the car to the combined ones on the trailer. There is still some work needed to remove and reinstall some of the trunk trim pieces to hide and protect the wiring, but I had the job done in less than an hour. And no soldering required!

Scritto da: BD

Excellent product, fit my SF perfectly.

Between the instructions and the online YouTube videos this is so easy to install, I was amazed! I was used to cutting and soldering connections , this makes installing a harness a breeze.

Scritto da: chris bruckshaw

Very easy install!

The good thing is its not under the vehicle and doesn't get dirty and corroded abd tucks away in the storage compartment.

Scritto da: bill mcgibbon

Fit like a glove

Plug and play once you got into the panels

Scritto da: James Stainton

Great product that works

Instructions were clear for the vehicle!