CURT 56320 Tilpasset 4-benet trailerledningsnet på køretøjssiden, passer til udvalgte Ford Escape

Brand:CURT

3.5/5

kr
852.79

Hvis dit køretøj ikke er udstyret med ledninger til at trække en trailer, er CURT brugerdefinerede ledninger den ideelle løsning. Et brugerdefineret ledningsnet - også kaldet et T-stik - er en enkel, plug-and-play elektrisk enhed, der tilsluttes dit bilelektriske system og giver en standard, universel anhængerledningsforbindelse. Dette gøres ved hjælp af to eller flere køretøjsspecifikke, OEM-kompatible stik til at tilslutte til baglygtesamlingen, hvilket eliminerer behovet for skæring, splejsning og lodning under installationen. Brugerdefinerede ledningsnet er gjort køretøjsspecifikke, og selvom de ikke er tilgængelige til alle køretøjer, tilbyder de en af ​​de hurtigste, nemmeste og sikreste måder at forbinde et køretøj til bugsering. Denne særlige plug-in-sele har en 4-vejs flad stikdåse og er designet til at være et brugerdefineret ledningsnet, der passer til visse år af Ford Escape (for at verificere dit køretøjs kompatibilitet, se applikationsinfo). Den leveres med alle nødvendige ledningskomponenter for at etablere en pålidelig anhængerledningsforbindelse, samt et støvdæksel for at holde stikket rent, når det ikke er i brug. Du har et billede i tankerne af din næste destination -- måske er det båden, der lander på dit foretrukne fiskested, måske er det en campingplads, der har udsigt over et af naturens mesterværker, eller måske er det den næste store arbejdsplads. Men at gøre dette billede til en realitet kræver mere end blot at dagdrømme. Det kræver en solid forbindelse og den rigtige mængde strøm. CURT brugerdefinerede ledninger er lavet med noget af den mest sofistikerede teknologi i branchen og er designet til at installere med lethed, hvilket giver dig en langvarig elektrisk forbindelse til dit anhængertræk.

EAN: 0612314563203

Kategorier Køretøj, Ersatzdele, Lys & El, Electrical, Wiring Harnesses,

STØVDÆKKE. For at fremme langvarig brug og vejrbestandighed leveres denne 4-polede ledningsnet til trailerbelysning med et gummistøvdæksel. Den passer nemt på det 4-vejs flade stik, når den ikke er i brug, og beskytter den mod udendørs elementer. PÅLIDELIG KRAFT. Dette 4-vejs anhængerledningsnet er bygget med overflademonteringsteknologi. Denne type kredsløb genererer mindre varme, optimal lysintensitet og holdbar ydeevne. KØRETØJSSPECIFIK. Dette eftermarked, køretøj-trailer ledningsnet er designet til udvalgte år af Ford Escape. STANDARD KONTAKT. Denne plug-in 4-flade trailerledning kan bruges til at forbinde trailerbaglygter, bremsesignallys og blinklys. 4-vejs trailerlysledninger er populært på en række forskellige trailere, hvilket tilføjer alsidige bugseringsmuligheder til dit køretøj. LET AT INSTALLERE. Ingen skæring! Ingen splejsning! Dette anhængerledningssæt tilsluttes eksisterende fabriksledninger på dit køretøj og udstyrer det med et standard, bageste 4-bens anhængerledningsstik til at tilslutte og trække en anhænger.
Brand CURT
Brand ‎CURT
Connector Type Plug-in
Country of Origin ‎Mexico
Customer Reviews 4.5 4.5 out of 5 stars 254 ratings 4.5 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56320
Item Weight 1.72 Pounds
Item Weight ‎1.72 pounds
Manufacturer ‎CURT
Manufacturer Part Number ‎56320
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56320
Product Dimensions ‎9 x 6 x 3 inches

3.5

13 Review
5 Star
76
4 Star
11
3 Star
4
2 Star
1
1 Star
8

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: phillip scarboro
Great easy installation
This product is a plug and play interface with the factory wiring. All you have to do is run a power wire to the battery from the back.
Scritto da: Larry
Works as it should, a lot of plastic has to be removed
The unit works great, but a lot of plastic and spare tire has to be removed
Scritto da: Bangster
Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED ...
This one actually fits my 2017 Escape, I should have done more due diligence and not listened to Amazons "this will fit your car" for the harness for the 2013-2016 Escape. I did cut it up so I didn't have to make hack and make giant holes for the entire connector to pass through to the tail lights, and I didn't run the wire to the front to the battery, but I utilized a fuse tap and the cargo area fuse panel, 5 feet of wire versus 20 running under the car. Everything was long enough, only part of the instructions I read was what side the single green wire went to. I was going to reverse engineer it to mount the box on the passenger side close to the power, but decided I might be pushing my luck. I chose to keep the 4 pin end bundled up in the spare tire well and will feed it out the lift gate bottom/gasket when connecting to a trailer. Tested it with a small light tester and with the trailer itself, everything works, doesn't cause any issues with the vehicle's lights. Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED lights, but I am sure this would have driven the incandescent lights as well. Might try that out if I get a cargo hauler and feel it might cover the tail lights, toss the shipped lights on it. Easy to install, like that it is inside the vehicle and not mounted outside and wires ran outside, but were I live it really wouldn't matter.
Scritto da: GARY L GOLDSMITH
Works great.
Not really that hard to install. Took me maybe 2 hours taking my time. I'm still not sure why the vendor opposes connecting the power source wire to the extra fuse panel in the rear of a 2018 Ford Escape Titanium ! It has constant power ! Using something like the AutoEC ATO ATC 21AMP Add-A-Circuit Fuse Holder Fuse Box Tap Kit would work fine. But since they don't support that Option I ran it to the battery which was pretty simple on the Escape hiding it above the drivers skid pan . I will also say I could not get the harness end inside the CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat. I tried everything
Scritto da: Ron
Easy install
Ford installed there version at the dealership when first owner purchased. After we bought car used, we later found out that brake lights didn't work for towing. Purchased this unit and installed the correct way. Works perfect.
Scritto da: Jake W ia
Fast "Plug & Play" Install. Under 1hr and done.
Installed by myself on my 2018 Ford Escape (SEL) Perfect!!! Install took just under 1hr with the right tools and a general idea of where to run and hide the wires. Direct Plug and Play set up with only wiring work needed was positive terminal hook up. Saved a couple hours compared to a universal wiring kit where you'd have to hunt down each wire coming off your tail light to splice into. Not to mention you'd have to alter factory wiring.. with this kit, you do not alter any factory wiring at all! All my trailer lights work perfectly when plugged into this harness. And I couldn't beat the Amazon Warehouse Pricing!!!
Scritto da: Benjamin Sutton
Perfect fit for 2017 Ford Escape Titanium
Had some issues finding a wiring harness that would fit my 2017 Ford Escape Titanium. After some research I found this product along with installation instructions on eTrailer's Youtube. It fits just as advertised! As for the product itself, I was impressed with how easy it was to install, even if it didn't come with the best instructions (just watch the video instead!). I drove over 600 miles this weekend hauling a small trailer with LED lights and had no issues. If you are looking for a trailer wiring harness for your 2017 Ford Escape Titanium, this is what you need!
Scritto da: Kathryn S
Mostly good
Does NOT work with the Hopkins 48595 mounting bracket as another review mentioned. The shape is completely different. I'm mostly happy with this wiring harness for my 2017 Ford Escape Titanium. I was able to get all of it installed myself. I ran the power wire to an unused fuse in the cargo area fuse box. My only negative is that the instructions have no mention of the fact that my Escape has some sort of part in the way of where it says to mount the black box. I had to zip tie the box beneath that same metal piece.
Scritto da: Greg B.
Returned defective.
Got a defective one, 1 of the circuits didn't work had to return. Refund no problem. Got a second one works great have used Curt products on other vehicles with no problem.
Scritto da: Customer
Positive purchase.
Ease of installation and worked as advertised.
Scritto da: vern
Worked perfectly
Easy to install, good instructions, worked as described
Scritto da: TaylorMartine
Included instructions are bad
I was able to install this easily after looking up a video with much better instructions.
Scritto da: waveyq
Worked for my car
followed instruction to install it. not easy one but worked finally.

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array