Ydelsesværktøj 3/4-tons motorniveauer med håndtag, motorniveauer med håndtag - 1.500 lbs

Name: Ydelsesværktøj 3/4-tons motorniveauer med håndtag, motorniveauer med håndtag - 1.500 lbs
Brand: ‎Performance Tool
SKU: 0039564124365
Price: 1799.54 DKK
Availability: InStock

Brand:‎Performance Tool

3.5/5

kr
1799.54

Løft din motor for den mest bekvemme vedligeholdelsesposition med denne motorhejseløfter fra Performance Tool. Lavet af varmebehandlet kæde og kroge og faldsmedet stål, vil denne motorløftedel være ideel til enhver garage, automekanikerværksted eller vedligeholdelsesrum. Fuldt justerbar med en gevindstang og 3 positioner af huller til kædemonteringen, denne motorslynge kan bruges på en række forskellige motorstørrelser, op til 3/4 ton. Denne niveauer inkluderer et håndsving til hurtig justering.

Beløb

Tilføj til kurv Køb nu

EAN: 0039564124365

Kategorier Værktøj og boligforbedring, Byggeartikler, Material Handling, Winches, Taljer & Remskiver, Hoists,

TIDSBESPARENDE: Performance Tool W41036 er designet til at gøre oliefilterskift og andre bilreparationer hurtigere og mere effektive, hvilket hjælper dig med at spare tid og hurtigt komme tilbage på vejen. JUSTERBAR: Med dets justerbare design kan dette værktøj bruges på filtre og fastgørelseselementer i forskellige størrelser, hvilket gør det til en praktisk tilføjelse til enhver mekanikers værktøjskasse. ERGONOMISK DESIGN: W41036 har et ergonomisk håndtag, der giver et behageligt og sikkert greb, hvilket gør det nemt at bruge i længere perioder uden at forårsage træthed i hænderne. HOLDBAR: Lavet af materialer af høj kvalitet, dette værktøj er designet til at modstå hårdt brug og give pålidelig ydeevne i mange år fremover. ALSIGTIG: Performance Tool W41036 er et alsidigt værktøj, der kan bruges til en række forskellige bilapplikationer, herunder fjernelse og installation af oliefiltre og tilspænding eller løsning af bolte og møtrikker.

Brand	‎Performance Tool
Customer Reviews	4.5 4.5 out of 5 stars 691 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎W41036
Item Weight	‎13.25 pounds
Manufacturer	‎Performance Tool
Manufacturer Part Number	‎W41036
Model	‎W41036
Product Dimensions	‎10.1 x 17.6 x 12 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: patrick d

Best bang for buck

Assembly was a breeze didn’t have to Houdini anything like people said just used common sense to assemble. Could roll a bit easier but the powder coat on the wheel pegs has to wear down a bit and on the part to rotate the engine but mine is mounted a bit low. Currently holding a complete long block hemi 5.7 no issues.

Scritto da: Lucas D Hall

Solid Stand for the price

Overall its a solid stand, mine came with very beat up packaging but the stand was not banged up noticeably. I like the solid wheels and having 2 wheels in the front. It will also come apart with easy for storage. As mentioned in other reviews, it could be very challenging to mount the front wheels. Install these first for sure so you can have that bar to move around. I loosely installed the outer 2 bolts first on each wheel and then I simply used a telescoping magnet to hold the lock washer and nut and turned the bolt on the outside. Once the nut grabbed the lock washer, I didn't need any tool inside the beam to hold the nut, I was able to tighten it down completely from the outside. Overall took about 15 minutes to assemble at a relaxed pace. It does have a bit of a wobble in the middle while not loaded but its bluntly obvious it won't come apart or anything under weight as long as you tightened down the bottom bolt.

Scritto da: Michael Ward Sr

Made well

This engine plate is made very durable with different bolt spots giving flexibility in attaching to an engine when your are ready to take the engine out of your car or truck.

Scritto da: Shigeta

Mostly fits a Ford 460 EFI manifold

I used this to pull a Ford 460 EFI motor and it handled the heavy weight well. The bolt pattern didn't allow for four bolts to be used, but I could get two bolts in diagonally, which supported the weight just fine. It was a little sketchy, but ended up working out alright. I'd rather have a plate that allowed me to use all four bolt holes. If a Ford 460 EFI motor is your application, I can only half-heartedly recommend this, but fitment issues aside, this is a great product for the money.

Scritto da: Rocket

Product is good but I can't say much about packing during shipping

I like the product but I was not happy that it is all scratched up scarred to the metal and there was hardware missing. The box you can see in the photos was destroyed and engine stand was damn near falling out of the box. Handle is missing I assume it fell out somewhere

Scritto da: Jim Nasium

Decent enough

I purchased this to do some work on a 2001 Civic LX with D17A1 engine. This is the first engine stand I've owned, so I don't have anything to compare it to. The engine stands that are available for prime shipping are pretty limited, and after some hesitation, I ended up purchasing this particular stand. All of the other engine stands looked like various rebranded Harbor Freight stands with so-so reviews, so I opted for this one because the design was a bit different, and because it had four wheels with the front crossmember being narrow enough to fit in between my engine hoist legs. Also, this model has angle iron mating surfaces that provide a bit more support where the various frame pieces meet, so I figured it would might actually meet its 1000 lb rating. The build quality on this is alright, about on par with what you'd get from Harbor Freight. The assembly instructions aren't very good and don't actually reflect this particular model accurately, but it's pretty simple to put together, so you don't really need them. It came with almost all of the hardware that was necessary to put it together, except it was missing a washer or two of one type and had extra washers and nuts of another type. I currently have a Honda D17A1 engine mounted on it, and it holds it just fine. I used the engine/transmission mounting hardware from the car to secure the engine to the stand. The stand rotates the engine, but with some difficulty. That's better than it rotating too easily and damaging something, though. It wheels around just fine, and is very stable overall. I purchased this thinking that I might use it for working on a 5.2L V8 that I have, and I think it would hold it fine, though I'm not sure how well it will rotate with that large of an engine. I don't think this engine stand is worth the $90 I paid, probably more around $70 or so, but with the slim pickings and questionable quality of the other engine stands on Amazon, I think this one is a reasonably safe bet.

Scritto da: ponyxpress79

truck

Got this for the new engine. Stand is sturdy and well balanced. Easy to turn engine over to get to top and bottom. Great investment.

Scritto da: irvin garcia

Great product allows for different settings....

Scritto da: Amazon Customer

Good quality

Fits perfect, strong

Scritto da: A.P.B.

Works as needed

Lifting a 351 Windsor the thing is a godsend. Solid plate and fits perfectly.

Scritto da: TramShadyCustoms