UltraPro Z-Wave Smart Toggle Light Switch med QuickFit og SimpleWire, 3-vejs klar, kompatibel med Alexa, Google Assistant, ZWave Hub påkrævet, Repeater/Range Extender, Hvid, 2-Pack, 54912 2-pak lyskontakt Hvid vippekontakt

Name: UltraPro Z-Wave Smart Toggle Light Switch med QuickFit og SimpleWire, 3-vejs klar, kompatibel med Alexa, Google Assistant, ZWave Hub påkrævet, Repeater/Range Extender, Hvid, 2-Pack, 54912 2-pak lyskontakt Hvid vippekontakt
Brand: UltraPro
SKU: 0030878549127
Price: 746.09 DKK
Availability: InStock

Brand:UltraPro

3.5/5

kr
746.09

Hold forbindelsen til dit hjem med en UltraPro In-Wall Smart Switch. Den smarte switch er kompatibel med alle Z-Wave-certificerede gateways og giver dig trådløs kontrol over dine fastkablede lys fra enhver mobilenhed, computer eller Z-Wave-aktiveret fjernbetjening. Installationen er nem - udskift blot en standardafbryder i væg med den smarte afbryder. Uanset om du er hjemme eller væk, kan du få adgang til kontakten for at tænde og slukke dine lys. Ikke alene hjælper den smarte kontakt med at reducere energiomkostningerne, men den øger sikkerheden i dit hjem ved at holde værelserne lyse og beboede. Dit smarte hjem er lige blevet smartere med UltraPro In-Wall Smart Switch.

Beløb

Tilføj til kurv Køb nu

EAN: 0030878549127

Kategorier Værktøj og boligforbedring, Electrical, Stikdåser, Stikkontaktafbrydere,

KOMPATIBILITET - Fungerer med alle LED, CFL, halogen, glødepærer og andre enheder. IN-VÆG INSTALLATION MED HÅRDE KABLEDE FORBINDELSER (NEUTRAL WIRE PÅKRÆVET) – Udskift din eksisterende in-wall switch på så lidt som 15 minutter – Vægplade er IKKE inkluderet. En neutral ledning er påkrævet - bekræft venligst, at ledningerne i dit hjem er kompatible før køb (ældre hjem har muligvis ikke neutrale ledninger). ALEXA-KOMPATIBEL (HUB PÅKRÆVET) - Kræver en Alexa-understøttet hub til stemmestyring med Amazon Echo-produkter (Alexa-enhed og hub sælges separat). Kan ikke forbindes direkte med ECHO PLUS (Kun ZigBee-produkter kan forbindes direkte til Echo Plus). KRÆVER EN Z-WAVE CERTIFICERET HUB - Kompatibel med følgende Z-Wave Hubs: Honeywell, Ring, SmartThings, Wink, HomeSeer, Fibaro, Trane, Nexia, ADT, Vera og mere. TRÅDLØST STYR OG PLANLÆG LYS OG ANDRE ENHEDER – Planlæg tidsindstillede begivenheder for tilsluttede enheder. Tilpas scener til dag eller nat, hjemme eller ude. Styr kontakten trådløst fra hvor som helst via din smartphone, tablet, pc eller Z-Wave fjernbetjening. Afbryderen kan betjenes manuelt.

Brand	UltraPro
Connector Type	Clamp
Contact Type	Normally Open
Country of Origin	China
Current Rating	15 Amps
Item Dimensions LxWxH	1.92 x 2.14 x 4.15 inches
Item model number	54912
Manufacturer	Jasco Products Company, LLC
Material	Polycarbonate
Operating Voltage	120 Volts
Operating Voltage	120 Volts (AC)
Operation Mode	ON-OFF
Product Dimensions	1.92 x 2.14 x 4.15 inches; 8.78 Ounces
Switch Type	Toggle
Terminal	Screw

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: R. Levy

Very easy to integrate with SmartThings!

Open the SmartThings app and scan the sticker on the switch before you install. SmartThings will recognize the switch (although it called it a GE switch). Then once it powers up there is nothing more to do. SmartThings sees the switch and then you can integrate with whatever Home app you use with your SmartThings devices. I didn't have to do any toggles etc. as is sometimes necessary with these devices in order to find the device on the Z-wave network. For those that are interested, I installed this one in a housing box as pictured. The only problem was that the metal backplate on the switch was too large for this type of install, so I hacksawed it to align with the housing. Otherwise a straightforward install to replace an old Intermatic mechanical switch that is pretty outdated given the routines you can set up in SmartThings. I've installed a number of Zwave switches and although I can't speak yet to the reliability of this switch I did find that the initial set up was easier than some other devices.

Scritto da: Zeph

Same Hardware as GE, better price

These are the same Jasco Z-Wave switches that GE uses in their kit, just at a much better price. They integrated with HomeAssistant with no problems.

Scritto da: Diyengineer

Works so far

Purschased this to replace bad ge smart switches. Hoping these will last longer then ge brand. Also price is much better. Installation was easy and no hassle adding to smart things app.

Scritto da: Joe

Good ol Zwave.

Was looking for a replacement for an older GE jasco zwave switch that got toasted in a power outage. This one fit the bill. Was an exact match to the old one. And learning it was easy. Will buy again if I decide to Add more smart switches.

Scritto da: Jay_ATX

Works as good as GE and is compatible with Ring Alarm!

I needed to add some additional Zwave switches to my home but wanted something cheaper than the GE switches I had. These switches work the same as GE and are made by Jasco who also makes the GE Enbrighten switches. These also have a smaller profile than my original GE Zwave switches and paired easily to my Ring alarm. Installation was straightforward and took

Scritto da: toolseller

How to pair with SmartThings

For the SW4009 version, do the steps below to save hours: 1) Wire it up and install but leave faceplate off 2) do a factory reset even though it's new, flip toggle up 3 times, then down 3 times 3) in SmartThings app, find ur hub, select menu->Z wave utilities->z wave exclusion->flip toggle up and maybe down to get device excluded message. Maybe repeat...getting it excluded is KEY! 4) From a "room" in the app, select add a device. Browse by type->switch/dimmer->GE->GE z wave->next... 5) momentarily flip toggle up, then maybe down, and maybe repeat... usually works first time. You're not holding the toggle for this or any steps in this guide. 6) enter PIN from switch when prompted for the security function (u left cover off didn't u???).. don't bother trying to scan... 7) Success!!! Or try again from factory reset. You can now rename, move to another room, etc. 8) LED backlight is controlled in the Smart Things app. Select the switch and you can open the menu for the switch to control LED backlight function. I couldn't get it to work via directions provided with the switch by toggling the toggle. Finally, I've gotten a couple different versions of the "same item". This is what I FINALLY got to work with the noted part number. Factory reset and excluding from hub before adding to a room appear to be the key. Usually u don't have to keep toggling to get to pair but sometimes it helps, as does moving your hub close to the switch. If u can get the device excluded, ur well on ur way to success.

Scritto da: LearningMonkey

Same as GE for a lot less!

I saw these and thought this might be a cheaper option than the GE Embrighten switches that I have been getting. Not only are they cheaper, but they are EXACTLY THE SAME! I am pretty sure these are the exact same switches made by Jasco that GE offers. Features in the postings match up, they install in Smartthings as GE switches, and the printing/graphics on the face of the switch are the same! At $10 less per switch I will be getting these exclusively now. Thanks Ultra-Pro!

Scritto da: Myles

Switch was easy to install No customer service to help with software light switch integration!!!

Switch was easy to install No customer service to help with software light switch integration!!! On this I do not recommend this product!