Sierra International 35-SS625 Marine-Grade Rustfrit Stål Panther Safe-Skeg til Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu og Yamaha påhængsmotorer

Brand:‎Sierra International

3.8/5

kr
1088.17

Sierra International 35-SS625 Marine-Grade Rustfrit Stål Panther Safe-Skeg til Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu og Yamaha-motorer Uanset om du ønsker at beskytte din nye skeg, reparere din beskadigede eller bare vil tilføje lidt glans, Sierra's Panther Safe-Skeg's 316 Marine-Grade rustfrit stålkonstruktion er glimrende poleret, og installationen tager kun få minutter! Sierra tilbyder et komplet sortiment af Ultimate Skeg Protection and Repair. YDERLIGERE DETALJER • Tilbyder 316 Marine-Grade rustfrit stål beskyttelse • Strålende poleret med et sømløst design • Indeholder et drænhul til at beskytte mod korrosion og frost • Installation tager kun minutter • Materialetykkelse: 1,5 mm (50 % tykkere end konkurrenterne) • Skid-plade er ikke nødvendig på grund af ekstra tykkelse i Safe-Skeg-materialet • Sættet indeholder: Safe-Skeg, monteringshardware, instruktioner, unbrakonøgle og Loctite 262 ANVENDELSESINFORMATION •Designet til at passe: Force Outboard – 70-90 HK (af Mercury), 2-takts fra år 1998 til 2002 Honda påhængsmotor – 75-90-115 HK, 4-takt fra år 1995 til 2007 Mercury/Mariner påhængsmotor – 50-60 HK (Big Foot), 2 og 4-takt fra år 2003 gennem nuværende Mercury/Mariner påhængsmotor – 70-75-80 HK, 2- og 4-takts fra år 1984 til nuværende Mercury/Mariner påhængsmotor – 70-90-100-115-125 HK Optimax, 2- og 4-takts fra år 1983 til nuværende Nissan Påhængsmotor – 70-90-115-120-140 HK, 2-takts fra år 1983 til nuværende Tohatsu påhængsmotor – 70-90-115-120-140 HK, 2-takt fra år 1993 til nuværende Yamaha påhængsmotor – 60-70- 80-90-100 HK, 2- og 4-takts fra årene 1998 til 2001 OM SIERRA Sierra er dedikeret til at beskytte dig og din investering. I 50 år har Sierra, et af de mest betroede navne i marineindustrien, stolt tilbudt motor- og drivdele af høj kvalitet. Deres produkter opfylder eller overgår den originale udstyrsdel, den erstatter, og er konstrueret til at opfylde nutidens høje hestekræfter motorkrav, samtidig med at de modstår det barske havmiljø. SIERRA. /b> Alle Sierra-dele kvalificerer sig til Sierra. Sierra garanterer, at deres produkter er fri for defekter i udførelse og materialer i produktets levetid. Sierra vil reparere eller erstatte det defekte produkt gratis. betingelser og begrænsninger. Du kan se Sierra.

Materialetykkelse: 1,5 mm (50 % tykkere end konkurrencen). Til: Vælg Force, Mercury/Mariner, Nissan, Honda, Tohatsu og Yamaha påhængsmotorer. Se produktbeskrivelsen nedenfor for fuldstændig applikationsinformation. Indeholder et drænhul for at beskytte mod korrosion og frost. Strålende poleret med et sømløst design. Sættet indeholder: Safe-Skeg, monteringshardware, instruktioner, unbrakonøgle og Loctite 262.
Brand ‎Sierra International
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 1,132 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎35-SS625
Item Weight ‎1.62 pounds
Manufacturer ‎MARINETECH PRODUCTS INC.
Manufacturer Part Number ‎35-SS625
Model ‎35-SS625
Product Dimensions ‎0.75 x 9 x 18 inches

3.8

13 Review
5 Star
82
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: PPL who love the South West
Awesome for repairing accident damagd!
Last year after a long weekend at the lake in haste to beat a storm. We jumped in the truck after securing my boat. I for got to raise the outboard. I didn't realize it until after 5 miles of driving. The Skeg was destroyer. I found this product t asked me thousands of dollars. In 20 minutes. Follow the instructions step by step to achieve desired results.
Scritto da: Christian
A++++++
A++++++
Scritto da: Brock Eggleston
Saved my lower unit due to cracked skeg
Skeg on Lower unit had cracked due to hitting a rock. Installed this and it not only looks great it works well. Was easy to locate and install onto the lower unit. Stainless steel fasteners look very nice
Scritto da: DRay
Awesome product
I installed it in the beginning of the season with ease. Probably half hour install. Much thicker and heavier than I imagined. It looks fantastic and add lots of character to my boat when on the trailer. It also helps steering as my other skeg broke off from previous owner. No welding was going to be considered for this aluminum area by me so this is really only option. And I’d recommend it for sure
Scritto da: Chuck
Easy to install, quick fix for a broken skeg.
I bought a SeaRay 180 BR with a 3.0 liter Mercruiser last fall from a dealer that had it on consignment. I saw that it had a big chunk broken out of the rear of the skeg so I almost passed on it. The sales guy (a friend of mine) said just install one of these and it will be good as new. It was super easy to install. Just file off any burrs or divots, tap it in place with a rubber hammer and drill the mounting holes. One little trick I have learned over the years is to use a center punch on the aluminum first to center the drill in the holes on the fitting and keep if from "walking". Then start drilling with a smaller drill bit than the final size. Drill about half way through with the small drill then go to the other side and drill the rest of the way through. The first pilot hole you drilled from the first side will help direct the drill back to the center. When you use the recommended drill size to drill the final hole it will hit the other side dead on.
Scritto da: Kindle Customer
looks great
Does exactly what it says
Scritto da: andrey
Easy installation, perfect fit
Easy installation, perfect fit
Scritto da: Kenneth Baca
A must if your operating your boat in low water level.
Easy install a must for boats that operate in shallow water.
Scritto da: Hootie57
Easy to install
Solid piece to help repair my Skeg after we had found some “hard water” during the last trip out. Fitment was a little off but made a few small modifications and seemed to work well. I’ve used a lot of panther products in the past and they’ve never disappointed
Scritto da: Bev
Fit on a Mercury Classic 60
So although not designed for my 87 Mercury Classic 50, (45 hp 2 stroke, 4 cyl 45 hp) I was able to grind my old front edge slightly and get a great fit. Based on my measurements and the manufacturers feedback, this is the one I chose. The 650 did not fit. This did. Great quality and value. Easy to install 30 minutes.
Scritto da: Marc Sarrazin
Super facile à installer
Parfait pour réparer la pièce briser
Scritto da: Edward W de Jong
Easy to install.
Great product.
Scritto da: Amanda
It was great to hide the damage we had done to our skeg.
Easy to install

Relaterede produkter

hot
Sierra 18-2779 Marine udstødningsslange
3.4/5

kr 545.89

Sierra 18-2779 Marine udstødningsslange
3.4/5

kr 545.89

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array