OEMTOOLS 24235 Truck Stud Installer, reducerer friktionen ved montering af dækbolte med værktøj, til kraftig brug med slagnøgle eller skraldetrucks

Brand:‎OEMTOOLS

3.5/5

kr
482.62

Højkvalitetskompatibilitet: Fungerer med din standard skralde eller slagnøgle; Passer til knopper op til 22 millimeter eller 7/8 tommer. Holdbar og robust: Den brede lejeflade på dette hjulboltinstallationsværktøj fordeler belastningen for at forhindre beskadigelse og forlænge levetiden af ​​hjulboltværktøjet. Beskyttende drift: Leje reducerer friktionen; Installer nye piggere til dæk uden at bekymre dig om at beskadige dine piggevind. Specialiseret til lastbiler: Designet til hjulbolte op til 7/8 tommer i diameter; Udstyret med et kraftigt trykleje for nemt at trække den nye hjulnavsbolt på plads. Heavy Duty Stud Installer Tool: Denne knop-installator forhindrer skader på hjulbolte og møtrikker ved at reducere friktionen under installationen.

Højkvalitetskompatibilitet: Fungerer med din standard skralde eller slagnøgle; Passer til knopper op til 22 millimeter eller 7/8 tommer. Holdbar og robust: Den brede lejeflade på dette hjulboltinstallationsværktøj fordeler belastningen for at forhindre beskadigelse og forlænge levetiden af ​​hjulboltværktøjet. Beskyttende drift: Leje reducerer friktionen; Installer nye piggere til dæk uden at bekymre dig om at beskadige dine piggevind. Specialiseret til lastbiler: Designet til hjulbolte op til 7/8 tommer i diameter; Udstyret med et kraftigt trykleje for nemt at trække den nye hjulnavsbolt på plads. Heavy Duty Stud Installer Tool: Denne knop-installator forhindrer skader på hjulbolte og møtrikker ved at reducere friktionen under installationen.
Brand ‎OEMTOOLS
Customer Reviews 4.5 4.5 out of 5 stars 344 ratings 4.5 out of 5 stars
Exterior ‎Chrome
Is Discontinued By Manufacturer ‎No
Item model number ‎24235
Item Weight ‎4 ounces
Manufacturer ‎OEMTOOLS
Manufacturer Part Number ‎24235
Model ‎OEMTOOLS 24235 Truck Stud Installer
OEM Part Number ‎24235
Product Dimensions ‎4.8 x 3.1 x 0.7 inches

3.5

13 Review
5 Star
75
4 Star
12
3 Star
5
2 Star
1
1 Star
6

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Amazon Customer
Simple
This tool made installation very simple and took longer to take brakes off
Scritto da: eduardo castellanos
Great quality
Anything oemtools that I have bought has always been good!
Scritto da: TractorMan92
Absolutely Amazing; Fast, Smooth and Simple~~~ !!!
Bought this stud installer on a whim since in the past I had just used a nut/washer combination to pull new studs into place. This installer had a roller bearing surface that allows the nut to spin as it tightens with no side load on the stud. It pulled the stud into place in less than 15 seconds using a regular 1/2" drive ratchet to turn the lugnut. Worked so well, I am looking for another project to use it on. The last one was to replace three cross-threaded 2014 Accord rear studs that a local tire ship screwed up and then tried to blame my SIL. Tire had never been off and the lugs were pristine before the new tires were installed. Made the repair a simple one. I removed and replaced three banged up studs (and new lug nuts needed too) in less than 20 min. Nice....
Scritto da: Nigel Franceschi Agosto
Perfect and very useful.
Perfect and very useful. Highly recommended, shipping was super fast.
Scritto da: Rogue 1 2016
Can't review this item, This item was returned as it didn't fit
Can't review this item, This item was returned as it didn't fit
Scritto da: Kurt K.
Did the job but…
It did what it claimed, but it messed up the lug not a little, nothing a file and some patients didn’t resolve, but I recommend getting an extra nut so you can use that just for the install.
Scritto da: Jeff Gerber
Make sure you know how close the studs are to the hub before purchasing.
I am only giving this 4 stars instead of 5 because it was too big to work on my dodge dakota truck even though in the description is says its for a truck. I should have measured how close the studs were to the hub before purchasing so I put some of the blame on myself. Because the studs are so close to my hub, it was pulling the new studs i was installing in crooked and rendering it useless for me to use. Make sure you know how close your studs are to the hub before purchasing. If you don't, you could end up buying something that won't work for your vehicle like I did. However, I used this on my friends ram 2500 and it worked perfectly.
Scritto da: Elroy
Works great!
The bearing inside the tool makes it easier to install wheel studs on trucks
Scritto da: Andrey Dolgirev
It works very good
It works very good
Scritto da: Eric Hentzelt
a good tool that is a great idea
the tool works great, if it fits on the hub of your wheels. Make sure there is enough room between the studs your installing and the raised hub center cap.
Scritto da: Nicolas
Missing part
I ordered the set for car AND truck. I received only one of them
Scritto da: Stephen
Pretty high quality
Quality feels strong enough to last a while Easy to install studs with this
Scritto da: t m
Good tool and price
Good tool for the price

Relaterede produkter

hot
Moroso 46160 7/16 x 2-7/8 hjulbolt
3.3/5

kr 437.60

Moroso 46160 7/16 x 2-7/8 hjulbolt
3.3/5

kr 437.60

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array