Klein Tools 631M Værktøjssæt, magnetmøtrik-drivere størrelser 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 og 1/2-tommer på 3-tommer fuld hulaksel, 7-stykke

Name: Klein Tools 631M Værktøjssæt, magnetmøtrik-drivere størrelser 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 og 1/2-tommer på 3-tommer fuld hulaksel, 7-stykke
Brand: Klein Tools
SKU: 0092644652141
Price: 959.20 DKK
Availability: InStock

Brand:Klein Tools

3.7/5

kr
959.20

Klein Tools Magnetic Nut Driver Set indeholder 7 stykker af de mest populære møtrikdriverstørrelser og er perfekt til en bred vifte af applikationer. Disse møtrikdrivere har magnetiske spidser og fulde hule aksler, der let glider over lange bolte eller tappe. Kleins patenterede Tip-Ident hjælper hurtigt med at identificere møtrikken og størrelsen i en værktøjstaske eller etui. I mere end 160 år har Klein Tools fremstillet håndværktøj af høj kvalitet i professionel kvalitet, der leverer den ydeevne, holdbarhed og præcision, der er nødvendig for at få arbejdet gjort rigtigt. Vores familie af ingeniører, arbejdere og håndværkere fortsætter med at lægge seks generationer af ekspertise i hvert værktøj, vi skaber, ved kun at bruge materialer af højeste kvalitet, overlegent håndværk og ved at holde produktionen så tæt på hjemmet, som vi kan. Klein er ikke kun navnet på vores virksomhed, det er også vores familienavn. Og da vi er en amerikansk virksomhed, der er familieejet og familiedrevet, ved du, at du kan regne med, at vi er her i morgen. Klein Tools laver ikke bare gode produkter, vi laver fantastiske produkter, der lever op til kravene fra de professionelle, der bruger dem hver dag... Siden 1857.

Beløb

Tilføj til kurv Køb nu

EAN: 0092644652141

Kategorier Værktøj og boligforbedring, Værktøj & Håndværktøj, Elektroværktøjsdele og tilbehør, Skruetrækkerbits, Møtrikdriverbits,

Lavet i USA. Tip-Ident identificerer hurtigt møtrikdriverens sekskantede orientering og størrelse ved at farvekode håndtagets ender, så du nemt kan koble møtrikdriveren med fastgørelseselementet. Cushion-Grip-håndtag giver mulighed for større drejningsmoment og komfort, og indvendige flanger giver solidt, vridsikkert akselanker. Værktøjssæt indeholder møtrikdriver Cat. Nr.: 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, 630-1/2M. Nut Drivers fulde hule aksel designet med Rare-Earth magnetiske spidser letter arbejdet med lange bolte.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Klein Tools
Brand	‎Klein Tools
Color	Black
Color	‎Black
Compatible Fastener Range	‎0.5 inches
Customer Reviews	4.7 4.7 out of 5 stars 325 ratings 4.7 out of 5 stars
Finish	‎Polished
Head Style	Hex
Head Style	‎Hex
Included Components	‎Tools/Accessories
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	13.4 x 7.5 x 1.5 inches
Item Dimensions LxWxH	‎13.4 x 7.5 x 1.5 inches
Item model number	‎631M
Item Package Quantity	‎1
Item Weight	‎0.2 Pounds
Item Weight	‎3.2 ounces
Manufacturer	‎Klein Tools
Measurement System	‎Inch
Model Name	‎631M
Number of Items	1
Number of Items	‎1
Number Of Pieces	‎7
Part Number	‎631M
Pattern	‎Tool
Power Source	‎Hand Powered
Product Dimensions	‎13.4 x 7.5 x 1.5 inches
Size	‎One Size
Style	‎Magnetic
Warranty Description	‎1 Year Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Scott Bloomquist

Could be deeper sockets

These are made well, my biggest disappointment is the depth. I tried using them today on those nylon inserted nuts that are slightly rounded at the top, these aren't deep enough to get past the rounded part, I had to switch to a socket set. These are fine for a standard sized nuts, I have couple cheap nut drivers that fit over any style nut.

Scritto da: Amazon Customer

Good Quality

Great Product Great Quality

Scritto da: Ray

Finally bought the entire set

I had previously purchased a few of these nutdrivers but not the whole set. After using them and then realizing that more and more I needed other sizes too, I decided to purchase the set. The high quality is what brought me back to these. They have a very strong magnet that will not lose it's hold. I had a hard time deciding whether to get these ones or the ones with the longer shank. I ended up settling on these because I realized that the longer ones wouldn't fit too well in the outside pockets of my toolbag, and would be sticking out too much. Didn't want to risk them falling out and losing one somewhere. Bought these and have been using them extensively ever since. As for the ones I bought before these...I gave them to my father to show him the quality and craftsmanship of these wonderful tools. These may seem to be on the pricey side, but I guarantee that you will not regret it and would purchase again if need be. Thanks for reading....Ray.

Scritto da: Leslie Adams

Klein. Enough said

Awesome tools

Scritto da: Derrick G.

Good Product

Expensive. Works well. Strong magnets. Highly recommended!

Scritto da: Austin Brandt

Magnetic set that actually grips!

Amazing set of nut drivers. I was working with the non magnetic Klein set before and they were awesome tools, however working from heights and over the head/shoulders work constantly without a magnetic set is really frustrating when you drop nuts all the time. Well worth the $20-$25 more than the standard set for the magnetic quality of it. A+

Scritto da: Evan T. 103

Awesome

I've only been working since July 2012 yet I primarily use Klein products. They have yet to let me down and this is no exception. The magnets are very strong. The grips are comfortable. I have nothing bad to say about this product. It's simply fantastic. You really can't go wrong with this set. It does exactly what you want when you want it basically. All in all, I highly recommend this to anyone who is looking for outstanding nut drivers. To make it clear... The sizes for this set is in inches... I had a bit of trouble figuring that out before I made the purchase. Wanted to give people a clear sign that the set was in inches. Way overdue update: Still a great set of nut drivers, magnets still work, still a comfortable grip... BUT, where the nut sits isn't deep enough to use for an acorn anchor. I have to use a coworker's driver or buy another one. A huge inconvenience.

Scritto da: Gerardo

Love the Magnet!!

I love these. They are magnetic and are hallow so that you may tighten up nuts on rod not longer than about 4 inches from the tightened position of the nut. They made new ones I think that can go all the way through and the rod just sticks out the back of the screwdriver but mine have been great. The magnets have stayed on and I've dropped my nut drivers from6 foot ladders plenty of times and the magnets are still there. Overall they have a great build quality. Worth the price.

Scritto da: Cal Shaw

Satisfactory

Comfortable