0
0

Total:kr 0.00

Se vognCheckout
LoginRegister
0

Total:kr 0.00

Se vognCheckout
LoginRegister

K&N koldluftindsugningssæt: Forøg acceleration og bugseringskraft, garanteret at øge hestekræfter op til 9 HK: Kompatibel med 5,7L, V8, 2012-2019 Toyota Tundra, 63-9036 Roto-støbt

Brand:K&N

3.6/5

kr
4971.01

MADE IN THE USA: Stolt fremstillet i USA for pålidelig kvalitet og pålidelighed og understøttet af amerikansk baseret kundesupport. LET AT INSTALLERE: Indeholder detaljerede trin-for-trin instruktioner og alle nødvendige dele - hele luftindtagssystemet kan typisk installeres på mindre end 60 minutter med grundlæggende håndværktøj. PREMIUM MOTORBESKYTTELSE FRA ET STYREDE MÆRKE: K&N luftindtag vil ikke ugyldiggøre producentens køretøjsgaranti og No-Hassle Lifetime Limited Warranty beskytter i hele dit køretøjs levetid. HOLDBART ROTOFORMET INDTAGSRØR OG TILPASSET VARMESKÆRM: Et rotationsstøbt indsugningsrør med høj densitet af polyethylen (HDPE) hjælper med at øge volumen af ​​luftstrømmen til din motor, mens varmeskjoldet hjælper med at beskytte indsugningsluften mod den høje temperatur i din motorrum. . MED K&N's SIGNATUR, GENANVENDIGE LUFTFILTER: Kombinerer 4 lag plisseret, åndbar bomuld med K&N's røde filterolie for at absorbere snavs og støvpartikler, så ren luft kan fortsætte med at strømme ind i din motor, behøver kun rengøring hver 100.000 miles under normale motorvejskørselsforhold. BEDRE BUGSERING: Luftindtagssæt forbedrer acceleration og ydeevne op ad bakke ved bugsering ved at forbedre gasresponsen og den samlede hestekræfter og drejningsmoment. DYNO-TEST, DU KAN STOLIDE: K&N-luftindtags-hestekræfter/drejningsmomenttest udføres på hjulbaserede dynamometre, og rapporterne følger med hvert indsugningssystem. HØR GRURREN: K&N's indsugningssystemer giver din motor mulighed for at ånde og lyde, som den skal - din motor vil knurre ved acceleration og vende tilbage til stille en gang ved hastighed. GARANTERET STØGNING I HESTEKRAF OG MOMENT: K&N koldluftindsugningssystemer giver en mindre restriktiv vej for luftstrømmen, hvilket øger mængden af ​​kølig, iltrig luft ind i din motor en anslået stigning på op til 9 HK og op til 13,57 ft.lbs. af drejningsmoment.

Beløb
Tilføj til kurvKøb nu

EAN: 0024844314086

Kategorier Køretøj, Præstationsdele og tilbehør, Filtre, Air Indsugning,

MADE IN THE USA: Stolt fremstillet i USA for pålidelig kvalitet og pålidelighed og understøttet af amerikansk baseret kundesupport. LET AT INSTALLERE: Indeholder detaljerede trin-for-trin instruktioner og alle nødvendige dele - hele luftindtagssystemet kan typisk installeres på mindre end 60 minutter med grundlæggende håndværktøj. PREMIUM MOTORBESKYTTELSE FRA ET STYREDE MÆRKE: K&N luftindtag vil ikke ugyldiggøre producentens køretøjsgaranti og No-Hassle Lifetime Limited Warranty beskytter i hele dit køretøjs levetid. HOLDBART ROTOFORMET INDTAGSRØR OG TILPASSET VARMESKÆRM: Et rotationsstøbt indsugningsrør med høj densitet af polyethylen (HDPE) hjælper med at øge volumen af ​​luftstrømmen til din motor, mens varmeskjoldet hjælper med at beskytte indsugningsluften mod den høje temperatur i din motorrum. . MED K&N's SIGNATUR, GENANVENDIGE LUFTFILTER: Kombinerer 4 lag plisseret, åndbar bomuld med K&N's røde filterolie for at absorbere snavs og støvpartikler, så ren luft kan fortsætte med at strømme ind i din motor, behøver kun rengøring hver 100.000 miles under normale motorvejskørselsforhold. BEDRE BUGSERING: Luftindtagssæt forbedrer acceleration og ydeevne op ad bakke ved bugsering ved at forbedre gasresponsen og den samlede hestekræfter og drejningsmoment. DYNO-TEST, DU KAN STOLIDE: K&N-luftindtags-hestekræfter/drejningsmomenttest udføres på hjulbaserede dynamometre, og rapporterne følger med hvert indsugningssystem. HØR GRURREN: K&N's indsugningssystemer giver din motor mulighed for at ånde og lyde, som den skal - din motor vil knurre ved acceleration og vende tilbage til stille en gang ved hastighed. GARANTERET STØGNING I HESTEKRAF OG MOMENT: K&N koldluftindsugningssystemer giver en mindre restriktiv vej for luftstrømmen, hvilket øger mængden af ​​kølig, iltrig luft ind i din motor en anslået stigning på op til 9 HK og op til 13,57 ft.lbs. af drejningsmoment.
Brand K&N
Fit Type Vehicle Specific Fit
Item Dimensions LxWxH 18.25 x 18.25 x 12.5 inches
OEM Part Number 63-9036
Product Grade Replacement Part

3.6

13 Review
5 Star
78
4 Star
12
3 Star
4
2 Star
1
1 Star
4

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Anthony Almeida
Worth every penny!!
K&N never disappoints! This is an aftermarket product that I highly recommend. Hearing that V8 growl is so satisfying! It also states that it only fits years 2012-2019 but it fits perfectly in my 2020 Tundra.
Scritto da: Lars Stoner
Can’t go wrong with k&n
Wakes up my tundra along with my throttle body spacer like crazy. Have their filters on all my vehicles and my four wheeler and the amount of power improvement you get out of a intake filter and plumbing is crazy. Definitely get this for your truck
Scritto da: brian e wanzor
Nice
Works great, engine sounds mean. Better mileage already!
Scritto da: prevent ت
Want a DIY TRD CAI at half the price?
I feel like this is a product that works best when combined with other mods. Assuming you want more exhaust tone, let's assume you have a catback of some sort. Most of us go with the TRD. But maybe you want more sound (both from the exhaust in the back and from the engine up front) and the TRD CAI costs too much at $400? In that case I think this is a perfect medium. If you look at the TRD CAI, it basically consists of straight tube from the stock airbox to your throttle body, an air filter, a less restrictive scoop in the fender well, and a pretty red TRD top for the airbox. The rest... is identical to your existing CAI in your truck. A tall price to pay, huh? While I will admit that since the upper red part of the TRD CAI is slightly taller than the stock one, it may (in theory) supply more air at a moment's notice... but odds are those types of gains are only noticable on a dyno and will be in the single digit numbers at a very specific RPM at best. So why get this product? Okay, you got the TRD Cat back but you want just a little more. I recommend pairing this product with TRD Part #: PTR0334079, the "TRD Flow Accelerator" which basically opens up a wider opening in your fender to allow more air into the airbox. If you purchase this K&N product without that part, the K&N can only do as much work as it can with the air that it is given. So give it more air! You're buying this because you want better sound, and that extra $15 I believe is how you get it. You can purchase it as a replacement part for less than $15 and have 1/3 of the $400 TRD CAI. As for the air filter... yes, this K&N kit does come with an air filter that allows for higher airflow than stock but if you put it on a dyno... again, you won't notice a significant difference. But from the reading I've done, the K&N air filters achieve higher flow in part due to allowing more junk to pass through their filter. So if you really wanna do a TRD CAI on the cheap, throw a TRD filter in your airbox along with this K&N tube. You'll get that sound to compliment your exhaust... but at a fraction of the price of the TRD version, while maintaining a high level of filtration. Don't worry, you can still paint the stock airbox lid red if you wish. Pros: - TRD CAI at a fraction of the price - Uses stock airbox, just like the $400 TRD model Cons: - K&N filter doesn't filter as much as the OEM Toyota filter or the TRD Filter... but that's a cheap fix. Just use this with a TRD filter. - Would it kill K&N to give us a red coupling to connect to the airbox with? It would totally help justify the pricetag, while minimizing costs on their end. The TRD one is red and pretty, this one is black and black. Both achieve the same result... but the $400 TRD one is red. K&N could totally steal sales from TRD by making parts of this kit pretty too. Do any of us feel good after spending $200+ on a plastic tube? At least pretty it up pls. Other: - Works best with AT LEAST the TRD Flow Accelerator, which is just $15. For max effect pair it with a proper catback exhaust. On stock Tundra, don't expect much. You're replacing cheap parts with cheap parts. You get what you pay for. But combine this with a decent exhaust... you just saved $200 versus the TRD model and achieved virtually the same result.
Scritto da: Gerry
As advertised
Once installed this works very well and I'm happy with it. The new growling sound it makes is crazy. I put one of these on my Civic SI earlier this year and was impressed with it then. In town I definitely no improvement in gas mileage but on the highway it seems to improve by more than 2 Mpg as I drive the same stretch of highway a lot.
Scritto da: Jason Davis
No Sound Improvement
2016 Tundra 5.7 along with the TRD air accelerator. Unknown on mileage yet. No sound on Induction which is disappointing
Scritto da: Timothy C.
Makes my truck sound mean!
I decided to go and buy this intake, I knew upfront that the intake wouldn't really increase performance, most don't. Sure it reduces air flow restrictions but doesn't compress the air. It arrives in two days with prime, I go to install it, assembly of the heat shield and mounting points takes about 15 minutes longer than it should have. As a suggestion to K&N, please for the love of God, pre-organise the hardware into marked baggies or cardboard packs. Now on to installing the heat shield, the instructions have you mount the shield into the lower factory holes but say nothing of the side mounting bracket needing to share a hole on the inside of the fender which was nearly f'n impossible to get to, no mention in the instructions because unless you remove the plastic trim and panel between the hood and the wipers you DO NOT HAVE ENOUGH ROOM!!! Squeezing your head and a hand between the hood lift piston and the hood is not fun. So ease of install was poor just because of this one mounting point. That said, it makes my truck rumble with light throttle and absolutely ROAR under heavy throttle!! That alone was worth the price of the intake and the aggravation of the install! No check engine lights, no running oddly, just pure ROAR! Increased fuel economy isn't expected when you have your foot on the floor all the time so I can't speak for that yet!
Scritto da: Jer
Vvroom
Strange there no instructions included but easily found online. Love the new sound. Makes the exhaust sound deeper too.
Scritto da: MARK L
Makes a noticeable change
Some of the instructions were off regarding the mounting points, so we just winged it and nailed it. Gas pedal definitely feels lighter and fuel economy change is more and more noticeable. Not sure about the sound everyone claims to hear but otherwise this does the trick.
Scritto da: Amazon Customer
Great item to get.
Easy installations and love the performance and the sound of it. You’ll notice the difference when it comes to sounding.
Scritto da: Denis Barré
KN
Installation et esplication précise gîte parfaitement sur mon tundra 2017
Scritto da: Lyle Husak
Easy instructions
Excellent and understandable instructions with pictures
Scritto da: ruffbmw
Bad ass. You need this now
Bad ass. You need this

Relaterede produkter

hot
K&N koldluftindsugningssæt: Forøg acceleration og bugseringskraft, garanteret at øge hestekræfter op til 9 HK: Kompatibel med 5,7L, V8, 2012-2019 Toyota Tundra, 63-9036 Roto-støbt
3.6/5

kr 4971.01

K&N koldluftindsugningssæt: Forøg acceleration og bugseringskraft, garanteret at øge hestekræfter op til 9 HK: Kompatibel med 5,7L, V8, 2012-2019 Toyota Tundra, 63-9036 Roto-støbt
3.6/5

kr 4971.01

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array

Total:kr 0.00

Se vognCheckout

Kategorier

Alle kategorier
Menu Kategorier Nær ved Vogn

Menu