Jack & June Heavy-Duty gør-det-selv-gyngesæt-beslag og hardware til sikker, nem installation af legesæt kun beslag

Name: Jack & June Heavy-Duty gør-det-selv-gyngesæt-beslag og hardware til sikker, nem installation af legesæt kun beslag
Brand: Jack and June
SKU: 0754806322605
Price: 1298.83 DKK
Availability: InStock

Brand:Jack and June

3.7/5

kr
1298.83

Det har aldrig været nemmere at bygge dit eget gyngestativ med Jack & June. Vores kraftige DIY gyngestativ gør dette til den stærkeste og sikreste måde at gøre-det-selv på. Skub blot et 4X6 tømmerstykke ind i enderne af beslagene. Hvert beslag er beskyttet med en pulverlakeret finish for både langvarig ydeevne og holdbarhed. Dernæst skal du bruge beslaget som en skabelon til at bore huller og fylde dem med de medfølgende bolte og skiver. Gentag denne proces med fire 4x4 stykker tømmer til benene og løft forsigtigt legesættet oprejst. Der kræves ingen mål ved hjælp af beslagene! Når du tilføjer gynger, er dit DIY-legesæt færdigt på få minutter! Beslag sælges enkeltvis; denne liste er for ET beslag med hardware. Køb to beslag for at bygge et A-ramme gyngestativ. Monteringsudstyr inkluderet (14 bolte og 14 skiver). Både tømmer og gynger er ikke inkluderet i dette sæt og sælges separat. Jack & Junes kraftige stålbeslag er den hurtigste og sikreste måde at bygge dit eget gyngestativ på i dag!

Beløb

Tilføj til kurv Køb nu

EAN: 0754806322605

Kategorier Legetøj og spil,

Tømmer og gynger sælges separat — tømmer og gynger er ikke inkluderet i dette sæt. Jack & June anbefaler at købe en 4x6 topbjælke og fire 4x4 støtteben for at fuldende dit DIY gyngestativ. INKLUDERER ET BESLAG OG HARDWARE – Beslag sælges enkeltvis; denne liste er for ET beslag med hardware. Køb to beslag for at bygge et A-ramme gyngestativ. Monteringsudstyr inkluderet (14 bolte og 14 skiver). HURTIG, NEM OG SIKKER INSTALLATION — Konstruer et A-Frame gyngestativ på kun få minutter med medfølgende beslag og hardware. Skub bjælker ind i konsoller, og brug konsollens huller som skabelon til at bygge. HEAVY-DUTY KONSTRUKTION — Kraftige gyngestativbeslag er lavet af stål og beskyttet med en pulverlakeret finish for ydeevne og holdbarhed. GØR-DET-SELV BYG — Det har aldrig været nemmere at bygge dit eget gyngestativ! Jack & Junes gør-det-selv-sæt bruger kraftige stålbeslag for den sikreste og hurtigste måde at bygge din egen på.

Assembly Required	No
Brand	Jack and June
Color	(1) Bracket
Country of Origin	USA
Customer Reviews	4.7 4.7 out of 5 stars 153 ratings 4.7 out of 5 stars
Finish Type	Metal
Frame Material	Alloy Steel
Item model number	PG9000W
Item Weight	14 Pounds
Manufacturer	Jack and June
Material	Metal
Product Dimensions	15"D x 16"W x 14"H
Product Dimensions	16 x 15 x 14 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: QOD

A few tweaks would make this 5 stars

I ordered these (note as many say you must buy two as they don’t come as a pair) after I failed miserably at cutting the correct angle in top the 4x4 posts with a skill saw to set the head piece. These brackets make construction of an A frame swing base easy The unit is very sturdy. As others have said I had to use a sledge hammer to set the 4x6 post in the top rail as the opening was fabricated as a tight fit This is where my disappointment came. There was a LOT of play in the 4x4 post fit-I’m talking 1/8 to 1/4 inch space on all 4 sides. As the legs are 8’ Long it seemed important to have the legs bolted in at roughly the same angle to insure a “flat” profile. I set the legs against the outside wall and used shims to position the leg pairs at roughly the same angle on the walls 90 degrees from the outside wall . When I got it all bolted up there was more play in the legs then I was comfortable with. Maybe this is intentional to allow for leveling but I didn’t like it. I would be MUCH happier if the fit of the legs was as tight as the header insuring the correct leg placement. I ended up adding a stabilizing bar as shown to keep the legs at the angle I wanted. I still have to cut the angle on the feet of the legs so it sits “flat”. I guess I knew that before construction but I wish the instructions had provided a rough starting angle. Fixing it now will be more work. As many have said this is hard to do as one person. I built the left leg pair. Got it standing on its legs and them strapped the head beam to the top of a ladder to hold it. I was then able to insert the 4x4 posts in the right pair. One person would struggle to flip it once built

Scritto da: Army Guy

Not a set! Must buy 2

You can get another brand for cheaper that comes with 2 brackets, however, these are really nice quality. Welds are good and the powder coating should last a very long time. I used 10 foot 4x4's, you can use whatever length you want, 10 feet was probably an overkill. When my kids get too old for this I can repurpose to a swing bench/seat? I added a rock climb wall on the side of this for double the fun!

Scritto da: Amazon Customer

Extremely Strong Swing Set Bracket

This is an Amazon product and it is a super product! It is well made and solid. All the hardware is in the box. If your working on a swing set then you should have the few basic tools needed; a drill for pilot holes for the 3 inch lag bolts; wrench or socket for the lag bolts (9/16 inch socket or wrench). Assembly requires two 4x4x8 treated boards for the legs. And, one 4x6x12 (for three swing set) Here’s the glitch for easy installation. We went to a box store and bought a true cut 4x6x12 treated beam. But, the bracket section for this 4x6x12 beam is true to size and will not fit a treated 4x6 beam because treated wood is actually slightly bigger; about 1/4 inch on all sides. You have to shave about 1/4 inch x 10 inches off one side of the 4x6 beam and 1/4 inch off the top or bottom of the beam as well. Then this brace will slide in without banging the beam or bracket. Do NOT bang the bracket! We used spray cooking oil after we shaved it on the beam and bracket and it slid in perfect. If you look closely at the photos you can see we shaved the 4x6 beam to fit There is NOTHING wrong with this bracket! It is designed to fit a 4x6 size beam BUT treated wood is still sold as a 4x6 product but it is slightly thicker Regardless, trim it a little like mentioned and it will work great and be extremely secure and strong! I would buy it again without hesitation!!!

Scritto da: April Deann

Grateful to have a swingset

Needed a swingset in the backyard for our 3.5 year old but we had limited space. Found another bracket on Amazon that we could mount to our tree (next to the blue garage in the picture) to use that as one side of our swingset, and purchased this bracket to make the other a-frame side needed to keep it upright. This bracket was mainly chosen based on reviews and the fact that it was already painted black, but it's actually been a really solid purchase. Very structurally sound. Came with nice bolts to attach everything. Has held up well and heavy enough that we haven't even needed to sink those 4x4 posts into the ground to avoid tipping. Bonus, when we move this will be the simplest swingset to take apart and transport to our new home.

Scritto da: Coop

Works as intended

The bracket is very heavy duty, well made. It's a little tricky since lumber seems to be getting smaller and smaller, but we made it work. Side note: You need at least two tall people (5'10" or taller) to tip the swing set upright when you're down. And those swing set beams are very heavy.

Scritto da: Kevin Poulin

Great quality

Great quality product. I just wish it came as a set for the same price.

Scritto da: JessicaRae

Awesome!

Awesome product!! Made it very easy to build a swing set for our son. Very well made and durable.

Scritto da: Eric Pallesco

Very good quality kit.

This will last a long time. Heavy duty and well made. I had to shave off the 4x6 to make it fit because it was treated lumber. The 4x4 will fit just fine.

Scritto da: Shawn

Why pay double?

It clearly says that it is one bracket for the price of two. My thought process was "Eww, why have a green brackets when you can have black", and it was the same price as two green ones so I assumed it was for two brackets. My bad. Clear instructions though, quality item, just not sure if it was worth double the price. Also, getting a treated 4x6 that wasn't rough cut was not possible in my area.

Scritto da: Eric h

Sturdy bracket but where's the quality control

Honestly I am kind of disappointed I bought this because it looked very professional and strong I'm undecided if I want to use it because it just looks off because it is by over half an inch and missing a bolt hole my OCD will go crazy looking at this. I'm sure no one else would even notice but I will always know. I'm sure it will still do the job no problem but it just is very disappointing