GOOACC GRC-32 100 stk 100 stk Type Holder til Lexus Toyota Karosseri, Stænkskjold Clips 90467-07201 Erstatning, Kvalitet Nylon Push Nitter med Bonus Fastener Remover 100 stk 7mm Clips + Remover

Brand:GOOACC

3.5/5

kr
221.58

Anbefalet bilmodel: Toyota, Lexus,4Runner, Avalon, Camry, Corolla, Highlander, Matrix, Prius,RAV4, Scion, Sequoia, Sienna, Solara, Tacoma, Tundra, Venza, Yaris, CT200,ES300, ES330, ES3050, ES3050, GS350, GS430, GS450, GS460, GX460, HS250, ISF,IS250, IS350, LFA, LS460, GS600, RX330, RX350, RX450 / 2002-Nuværende, 4706-biler, der er egnede GX-modeller, vil ikke beholde mange modeller, 2006 på listen. Velkommen til at hjælpe os med at berige den passende bilmodel OBS: Passer ikke til Toyota Rav4 2008, 2004 Rav4, 2011 TOYOTA AVALON

EAN: 0812227030896

Kategorier Køretøj, Ersatzdele, Karosseri & Trim, Karosseri, Clips,

DIAMETER: Passer i 7 mm hul, hoveddiameter, 20 mm; Stængelængde, 10 mm. GOOACC tilbyder klare billeder til din reference, tjek venligst størrelsen, typen og formen for at sikre, at varen er den, du har brug for. Ethvert spørgsmål, du kan kontakte os, vil vi svare inden for 1 dag. UDSKIFTNING AF HØJERE KVALITET: Erstatter Lexus & Toyota 90467-07201 til motordæksel, motorstænkskjold, underbakker, chase-dæksler eller varmeboks. PAKKE INKLUDERET: 100 stk. Push type holder Clips & 1 stk Fastener Remover. Giver dig mulighed for hurtigt og nemt at fjerne clips uden at beskadige dem. Nem adgang til lukkede områder.
Brand GOOACC
Brand ‎GOOACC
Color 100Pcs 7mm Clips + Remover
Customer Reviews 4.5 4.5 out of 5 stars 3,623 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item model number ‎GRC-32
Item Weight ‎7.4 ounces
Manufacturer ‎GOOACC
Manufacturer Part Number ‎GRC-32
Material Nylon
Model ‎GRC-32
Product Dimensions ‎1 x 1 x 1 inches
Size 100 Pcs Clips + Fastener Remover

3.5

13 Review
5 Star
71
4 Star
16
3 Star
8
2 Star
2
1 Star
3

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Joshua Johns
Better than expected
Went with the kit that has 100 pieces and the tool. Pieces were so close to OEM it wouldn’t surprise me if they came from the same place. We will see if they hold up for years or not. Tool is pretty good and works better than expected. I’m not sure it would hold as a service tool but good for the DIYer using it once a month or so.
Scritto da: V. Lee
Splash shield clips are easy to install
I only needed to replace 2 clips that fell off my 2013 Corolla. It was very easy to install the replacement clips and they are on securely. A good solution versus paying a mechanic to fix.
Scritto da: Randall W. Rasner
Larger than aniticipated but I did not convert metric measurements
Honest review of GOOACC GRC-32 100 Pcs 100pcs Type Retainer for Lexus Toyota Body, Splash Shield Clips 90467-07201 Replacement, Quality Nylon Push Rivets with Bonus Fastener Remover These were ordered to have on hand and mostly for an older vehicle I have in case needed. I have not used any of these so far. Likes: The price seems quite reasonable This comes with a tool for fastener removal You get 100 fasteners (I did not count them) The fasteners seem durable, especially for the reasonable price The removal tool seems adequate, and again reasonable for being included in the package/price Dislikes: None thus far Meh: I did not do a metric conversion on the measurements before ordering the product (my fault), but these are likely to be slightly large for many of the purposes on my older vehicle, and probably on many for my newer one. Hopefully this honest review helps someone decide about this product.
Scritto da: Kathie H.
Great price and quality
I bought these to use on my Lexus 350. When having my car serviced several of the old retainer clips broke from age. The repair service did not have any so I ordered these to have extras, as I am sure they don’t last a long time. The quality is much better than the ones that came with the car. Now everything under the hood is tightly secured. I would recommend this product. Kathie H.
Scritto da: Chrystie
Just What Was Needed
Replaced all the rivets that were missing and they seem to be working so far keeping all the Lexus hood coverings secured in place
Scritto da: Scott
Fit perfectly on my RX-350
These installed easily and fir perfe3ctly. Over the years many of the factory clips wer not replaced, and it was good to have a full complement of them under the hood.
Scritto da: Landon
Fits 05 Lexus 6x470
Easy to install and a direct fit. Don't look as easy to remove as the stock pieces but usually that's not the goal. Would buy again.
Scritto da: Robb Chunn 07
Easy to use but no ziplock bag
Easy to use and install, doesn't come with a ziplock bag though so I'm not sure why they say it does. But that's easily remedied with a ziplock bag lol.
Scritto da: Raflm
Works well for Lexus ES350 Engine
The OEM clips were starting to fall apart and no longer hold engine bay cover together. These work great and snap in easily. Included remover was very handy and made removing the old ones quick. Would recommend for Lexus!
Scritto da: Richard Parent
Good value
This was for a2015 Lexus where the buttons always break up here in the great white north, they fit very well
Scritto da: Frederico Galdino
Great product
It came as shown and has worked well.
Scritto da: CC
Good fit
Great fit! Had to cut plastic between the spreading members otherwise worked as if they were oem!
Scritto da: Herman
These fit my 2009 Lexus ES350
Was a bit worried that these might not quite fit but was pleasantly surprised when they clicked in easily and locked securely. I'm not sure how easily they will remove but there are plenty in the package to replace damaged ones as needed. The accompanying tool works well too...a nice little bonus that most suppliers do not include.

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array