Freeman P2PFFK Professional Pneumatic Flooring Nailer Kit (2 stk.), Sort

Brand:Freeman

3.5/5

kr
4991.60

Freeman P2PFFK Professional Pneumatic Flooring Nailer Kit (2 styk) er ideel til byggeentreprenører på arbejdspladsen såvel som gør-det-selv-byggere derhjemme. Dette must-have sæt indeholder en 3-i-1 15,5-Gauge og 16-Gauge 2 Flooring søm- og hæftemaskine (PFL618C) og en 4-i-1 18-Gauge 1-5/8 Mini Flooring søm- og hæftemaskine (PFBC940) ). 3-i-1 gulvsøm- og hæftemaskine affyrer 16 gauge T-klomper og L-klomper sammen med 15,5 gauge 1/2 krone hæfteklammer og er specielt designet til installation af 1/2 til 3/4 massivt fjer og not hårdttræ gulvbelægning. Drivbladet i ét stykke er lavet af hærdet stål for holdbarhed, mens kroppen er konstrueret af letvægts trykstøbt aluminium. To udskiftelige no mar-bundplader giver stabilitet til denne luftdrevne gulvsøm- og hæftemaskine og sikrer professionelle resultater ved at forhindre skader på færdige gulvoverflader. 4-i-1 Mini Flooring sømpistol og hæftemaskine skyder 18 gauge brad søm og smalle kronehæfteklammer, og 45-graders basen gør den perfekt til at lægge 1/4 til 1/2 fast eller konstrueret gulvbelægning. Fjern nemt gulvbelægningsfoden, og dette multifunktionsværktøj fungerer også som en sømpistol og hæftemaskine til trim- og finisharbejde. Det professionelle pneumatiske gulvsømpistolsæt inkluderer en glasfiberhammer med lang rækkevidde med et polstret greb, luftværktøjsolie og justeringsværktøj og er dækket af Freemans 7 års begrænsede garanti og 90 dages garanti på sliddele.

Sættet inkluderer lang rækkevidde glasfiberhammer med polstret greb, (2) udskiftelige bundplader, luftværktøjsolie og justeringsværktøj. 4-i-1 mini gulvsøm og hæftemaskine: dybdejustering uden værktøj; Anodiseret aluminium cylinder og magasin; Et stykke drivklinge af hærdet stål; Oliefrit design; Ergonomisk konstrueret krop; Komfort greb håndtag; 360 graders justerbar udstødning; Luftfilter/anti-støv hætte. 4-i-1 Mini Flooring sømpistol og hæftemaskine: Kompatibel med 18 gauge lim-sammenslåede brad-søm fra 5/8 til 1-5/8 og 18 gauge lim sorteret 1/4 smalle kronehæfteklammer fra 3/8 til 1-5/ 8. 4-i-1 Mini Gulvsøm og hæftemaskine: Ideel til at lægge 1/4 til 1/2 fast eller konstrueret gulvbelægning med 45 graders gulvbelægning, eller trim og afslutte arbejdet med det almindelige næsebetræk. 3-i-1 gulvsøm og hæftemaskine: Holdbar konstruktion; Anodiseret aluminium cylinder og magasin; Et stykke drivklinge af hærdet stål; Ergonomisk designet håndtag; Ingen mar bundplader. 3-i-1 gulvsøm og hæftemaskine: Kompatibel med 15,5 gauge lim sorterede 1/2 krone hæfteklammer, 16 gauge lim sorterede T-klemmer og 16 gauge lim sorterede L-klemmer fra 1-1/2 til 2 for alle 3 typer af fastgørelseselementer. 3-i-1 gulvsømremaskine og hæftemaskine: Ideel til montering af 1/2 til 3/4 massive gulve med fjer og not.
Batteries Required? ‎No
Color ‎Black
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 95 ratings 4.5 out of 5 stars
Included Components
Item model number ‎P2PFFK
Item Package Quantity ‎1
Item Weight ‎20.9 pounds
Manufacturer ‎Prime Global Products
Material ‎Aluminum body with heat-treated steel parts
Measurement System ‎Imperial
Part Number ‎P2PFFK
Power Source ‎Air Powered
Product Dimensions ‎16.75 x 3.5 x 22.75 inches
Warranty Description ‎Covered by Freeman's 7 Year Limited Warranty and 90 Day Wearable Parts Warranty

3.5

9 Review
5 Star
72
4 Star
16
3 Star
5
2 Star
3
1 Star
4

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Florin Hoxha
Solid Performance at a Fraction of the Price!
Let me just start by saying that I was not expecting how amazing these two nailers work. Beacuse of the price, I was expecting an average to above average set of flooring nailers, however they performed like champs. I used this set to install two different types of flooring- 3/4" Hardwood and 3/8" Strand Bamboo. My compressor used was a Bostich 135psi. The bigger gun, Freeman PFL618C, works best for hardwood flooring. I installed 1200 sq ft of 3/4" of hardwood without a single hickup. I used powernails 2" L-cleats and only rarely would it crack the tongue of the hardwood pieces. I mostly used a PSI or 90-100. It is a bit hard to when you get to the corners of the room so for that I used 1-5/8" brad nails on the smaller gun, PFBC940, to get the corners and the floor had no movement. It came out great. I had used the Bostich Flooring Nailer before and this Freeman was of the same build quality and performance at a fraction of the price. Make sure you lube it with the oil provided in the beginning of the project. Just 2-3 drops should do it when put in the. The smaller gun, PFBC940 is a multi use gun. It can be used as finish nailer or flooring nailer. (Side note: I have not tried the gun with staples). I used Powernails 1-5/8" brad nails for trim, moulding and bamboo flooring. I used it to install about 2800 sq ft of 3/8" strand bamboo, which is very strong. I nailed about 4-5 bards on each plank (about 6-8" apart). There was no issues in this project either. The small size of the nails and the high performance of the Freeman gun, made the project a breeze. Don't forget to lube the gun before starting the project. I recommend 2-3 drops of oil for each full day of use. I mostly used a PSI of 80-90 on the compressor. The small gun, PFBC940, also transformed easily to use as a straight nailer to install trim and moulding. I finished most of the house with this gun but then used a 2.5" nailer for some door trim that needed longer nails. I wish this gun would take longer brads for moulding and trim. Again, for this price as a set, its about 50% cheaper than buying them seperate. PFL618C is around 1/3 of the price of the Bostich, the most common among contractors. For the same price as renting a gun from Home depot for a few days, its worth buying this and using it again and again. It comes with a 7 year warranty so I feel confident this will last. I highly recommend this set.
Scritto da: JNJ Construction
Works beautifully
Usually use bosch but needed another spare set and figured to give it a try and I was surprised as this set actually worked a little better than my other nailers. We laid 500 sq ft of red oak flooring and every nail and piece sunk and was drawn in beautifully.
Scritto da: David Goplin
Commercial Contractor use rating
I’m a remodeling contractor for 28 years, my Bostich flooring staplers (which I really liked) were stolen so I needed to replace them. This product seemed to have good reviews plus for the same comparable cost this package included the smaller stapler which I also needed replacement. Though I have yet to use the small stapler, the larger stapler has been funtioning great! I like it
Scritto da: Tony
The best!
I can't say enough about this product. Made my job so easy.
Scritto da: Sawdustmaker
... used these on a job already and am really pleased with the quality of the guns and hammer
Have used these on a job already and am really pleased with the quality of the guns and hammer. I've been in the business of woodworking for over 40 years....so when I say they are good and worth the money....it comes with experience with the work as well as the tools. Can't go wrong with what they cost. Actually got rid of guns that cost as much as these do for the pair because I prefer them to the others.
Scritto da: Tony S.
Freeman combo
Great set for the price. I installed about 300' of Hickory which is quite hard and the cleat nailer never miss fired one time. Easy to load and use. Comes set up for 3/4" flooring with a 1/2" shoe included. The 18 gauge staples would not go through the Hickory. They bent and twisted instead. The gun works fine but the wood was too hard for the light gauge staples. Good purchase...
Scritto da: 1hot56chevy
Great for DYI
Easy to use great product. Great quality
Scritto da: C. Graves
Works Well
Works well but the extender handle broke when I finger tightened it. I used it with the extender handle and it did the job but put a lot of strain on the lower back. Other than the pore design on the extender handle I was happy with the nail gun.
Scritto da: Richard
I really like the flooring nailer works very well,
I really like the flooring nailer works very well, I've used it with "L" nails and the staples 1-3/4" and 2" works well. the brad nailer wont work at all for me tried nails and staples just wont send them . I may have it set up wrong as there are no directions for it but I don't think that's the problem.

Relaterede produkter

hot
MDSI 107300-00 Cobra erstatningsdæksel
0/5

kr 1721.60

MDSI 107300-00 Cobra erstatningsdæksel
0/5

kr 1721.60

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array