Forney 42300 Flux Core Mig Wire, Blødt stål E71TGS.030-Diameter, 2-Pund spole, Sølv, Pakke med 1 svejser med wire

Name: Forney 42300 Flux Core Mig Wire, Blødt stål E71TGS.030-Diameter, 2-Pund spole, Sølv, Pakke med 1 svejser med wire
Brand: Forney
SKU: 0032277423008
Price: 355.51 DKK
Availability: InStock

Brand:Forney

3.7/5

kr
355.51

Klik på navnet (AF FORNEY) ovenfor i blåt under titlen for at se vores fulde katalog over svejsere, slibemidler, kæde/wirereb, værktøj og mere!. Fremragende til udendørs blæsende forhold. Bedst egnet til enkeltpasapplikationer med høj rejsehastighed, kører varmere end solide ledninger. Alle positioner fluxkerne MIG-tråd til blødt stål, der er en selvafskærmet og fungerer godt på rustent, snavset og malet materiale.

Beløb

Tilføj til kurv Køb nu

EAN: 0032277423008

Kategorier Værktøj og boligforbedring, Svejsning og Lodning, Svejseudstyr, Svejseudstyr og tilbehør, Svejsetråd,

Batteries Included?	‎No
Batteries Required?	‎No
Capacity Description	‎Recommended Polarity: DCEN Straight; Tensile Strength
Color	‎Silver
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 5,045 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Forney 42300 Flux Core Mig Wire, Mild Steel E71TGS, .030-Diameter, 2-Pound Spool
Installation Method	‎Mig-welding
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎42300
Item Package Quantity	‎1
Item Weight	‎2 pounds
Manufacturer	‎Forney
Material	‎Mild Steel
Measurement System	‎Metric
Part Number	‎42300
Pattern	‎Welder
Power Source	‎AC/DC
Product Dimensions	‎1 x 4 x 4 inches
Size	‎Pack of 1
Style	‎Welder with wire
Thickness	‎0.03 Inches
Warranty Description	‎90 day warranty against manufacturer defects

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Sam G

Better than average flux MIG wire

Good product, even better since I got it at the Amazon Warehouse deals. Bought a back up MIG welder and the starter spool flux wire it came with was awful. The welder I bought also had a register in 7 days promotion, where they send a spool of wire for registering. That spool once it arrives will go directly in the storage locker, and will never see the light of day. Only negative is that it took 15 minutes to re-spool the wire as it was open box, but luckily I'm a fisherman used to using steel line to go deep, and untangling tangled wire is my specialty.

Scritto da: I am Matt Jones

Good flux core wire.

Definitely get this over the Lincoln stuff. This is multipass and you get much better welds and almost no splatter. It works really well on then metal tubing as well.

Scritto da: Dozer

Cleanest gasless wire ever!

This is the cleanest and most consistent gasless flux core wire I've ever welded with. I have an inexpensive HF 90amp flux core welder and when you are not using shielding gas, this type of welding produces splatter and depending on the brand and type, alot of splatter. I had Lincoln NR211MP wire previously loaded in it until I completely ran out. The Lincoln is ok but it does splatter. I threw in a spool of Vulcan .030 that I had lying around but never used and it was the worst wire. It was inconsistent feeding (had to turn it all the way down from a 5 to a 1.5 to prevent it from throwing off the stick out) and no bead control even after multiple adjustments. It was a mess and created alot of splatter and smoke. I order the Forney (which I got the next day) and put the welder back to the previous settings that I had for the Lincoln wire and right from the get go it ran smoothly with minimal splatter. What BBs that were produced came right off with a wire brush and the weld was super clean. I was pleasantly surprised. The Forney wire was actually cheaper than the HF Vulcan even on sale and its a 2lb spool vs 1lb of the Lincoln at a lower price. There are several YT videos comparing the Forney to other wires and the Forney produces the best results. I'm very happy with it and now that I know there's a wire that can produce these excellent results for non-shielded flux core, I'm going to do an inexpensive DC polarity mod to get an even better result.

Scritto da: Javier

Producto con calidad esperada.

Producto con calidad esperada. Buena relación precio/valor.

Scritto da: Happy Camper

Great product

I used this wire outside in the wind on rusty metal and it did a really good job with very little splatter. I have experience with stick welding but this was my first attempt with wire feed. I was impressed.

Scritto da: Anthony Clifton

Great Stuff

I buy these year round. Good product.

Scritto da: RetCountryLivin

I guess it is good...

Just beginning my journey into MIG processes. I was having trouble "striking" a good arc and moving with the canned wire that came with my machine. Some YouTube welders reviewed/suggested this as a excellent alternative. I will say it "strikes" and "moves" better. I am no authority on the subject-my welding experience can literally be measured in inches not feet. It does seem to work better that the other wire you get at the farm supply store or the seaside store.

Scritto da: louis

Excellent welding wire.

I like this wire i used it to weld my rod iron fencing it held well .

Scritto da: Toma Kicovic

Makes an amateur look good.

I have no idea how to weld I've owned a flux core mig welder for many years, and could never get satisfying results. Not even close. Tried this Fornay wire, and was AMAZED at the difference. It lays down smooth, and has virtually no spatter. HIGHLY recommended for a novice trying join metal.

Scritto da: Cindy

Great stuff!

Got this for a good deal for my son for Christmas and now I’ll be buying more because he’s impressed with it & now my father wants some as well!

Scritto da: Anthony Mckay

Great beginner wire and very forgiving

The wire works well around 75 Amos on my welder Great pool Great penetration

Scritto da: John

No problems

Absolutely no problems. Welds perfectly. It is very good value, as it is way cheaper than a brand that was available in a big store.

Scritto da: Tatyana Petr

No tire su dinero. Es un producto defectuoso.

El carrete de plactico estaba roto. No se pudo usar. Primera vez que he tenido que tirar a la basura un carrete nuevo. No soy nuevo en esto de soldar. En verdad el producto es de mala calidad.