eSenlite bevægelsessensor lysfatning, Radar Motion E26 skrue LED CFL glødepæreadapter, dæmpbar styring fra skumring til daggry (1)

Brand:eSenlite

2.9/5

kr
434.91

eSenlite Radar Bevægelsessensor aktiveret eftermontering lysfatninger Installer blot i en eksisterende lysfatning og skru derefter pæren ind i armaturet. Gør dit liv til et kuld lettere.Specifikationer: Driftseffekt: 90-230VAC/50/60Hz Driftseffektbelastning: 70W(max) Bygget på LED-lysbelastning: 1W/80LMRadar HRF: 5,8GHz, ISM-bånd Detekteringsvinkel: 360D bred) dækning (justerbar) Delay timing: 5 sek/1 min/3 min/8 min Installationsstørrelse: Diameter-2,5(Max); Højde-2,25(Installeret) Monteringsmetode: Loft, væg og stativ; Lodret eller vandret Driftstemperatur: 5F til 158F (-5 til +70C) Driftsmetode: Smart (standard) eller AutoFunktion og funktion:- Indbygget Doppler/Mikrobølge SMART-sensor: trænge igennem fysiske barrierer, overvinde temperaturændringer, ingen bevægelsesfølende forsinkelse- Innovativ belysning ingen bevægelsesfølende forsinkelsestilstande med ekstremt lavt strømforbrug: SMART-måneskinstilstand (fast 1W/80 Lumen) eller traditionel automatisk tændingstilstand (Tag dit eget valg!) - Udstyret med fotocellesensorer til ægte Dusk to Dawn-belysning hele natten - Nem gør-det-selv: behold din eksisterende stilfulde lysarmatur med tilføjede brugervenlige belysningsprofiler og SMART sparefunktion. Dette er 1-enhedspakke.*BEMÆRK: Kontroller venligst størrelsen og sørg for, at du har nok plads i din lampe eller installationsområde for at bruge pæren med fatningerne. *Radarsensor kan registrere bevægelse gennem glas og væg, så juster registreringsområdet baseret på den faktiske ydeevne. Kontakt os, hvis du har spørgsmål før eller under installationen.

EAN: 0856071006409

Kategorier Værktøj og boligforbedring, Pærer, LED-pærer,

💡TO ÅRS BEGRÆNSET GARANTI: Ved amerikansk opfindelse, produkt skabt og designet, QC'er. 100% kundetilfredshed er vores mål. Hvis du har spørgsmål, er du velkommen til at kontakte os. Vi hjælper mere end gerne. 💡LET DIY OG ENERGIBESPARELSE: Et simpelt plug-and-play vil forbedre din eksisterende stilfulde lysarmatur/standard belysningssokkel/bord, gulvlampe med brugervenlige belysningsprofiler og SMART sparefunktioner. Spar energiforbrug op til 98% uden at udskifte eksisterende lysarmatur, forbliv endda original, flot farveindeks glødepære. Kan forlænges pærens levetid op til 2-3 gange!. 💡BEKVEMMELIGHED OG FLEKSIBILITET: Med fotocellesensorer til ægte Dusk to Dawn-belysning, vil lyset automatisk starte eller fungere om natten eller i mørke tilstand; radarens bevægelsessensor kan trænge igennem de fleste fysiske barrierer (glas, træ, plastik og endda metalskærm); justerbar bevægelsesfølsomhed og detektionsområde (op til 26Ft/360-graders dækning). 💡INNOVATIV TEKNOLOGI MED VALGBARE BELYSNINGSPROFILER: SMART-MOONLIGHT-tilstand anbefales stærkt på grund af dens ekstremt lave strømforbrugsfordel (1W/100 lumen under fast nedtonet profil, når der ikke registreres bevægelse) og den unikke bløde lysstyrke, der skaber en nabovenlig og lysforureningsfri atmosfære om natten. AUTO-tilstand tilbyder traditionel bevægelsesfølende funktion og justerbar forsinkelsestid er tilgængelig. Træf dit eget valg!. 💡Kompatibel med de fleste eksisterende E26- eller E27-pærer: Opgrader dit eksisterende stilfulde eller brugerdefinerede lys med radar-bevægelsesfølende lysfatning til de fleste indendørs og udendørs belysningsarmaturer (uden udskiftning) såsom væg-, loft-, bord-, gulv- og dekorationsarmaturer osv.
Assembled Height ‎3 inches
Assembled Length ‎5 inches
Assembled Width ‎3 inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand eSenlite
Brand ‎eSenlite
Color White
Color ‎White
Control Method ‎App
Country of Origin China
Country of Origin ‎China
Customer Reviews 3.9 3.9 out of 5 stars 719 ratings 3.9 out of 5 stars
Finish Type ‎Polished
Finish types ‎Polished
Included Components ‎Light Sockets
Indoor/Outdoor Usage ‎Outdoor, Indoor
Is Discontinued By Manufacturer No
Is Discontinued By Manufacturer ‎No
Item model number EE101WLS-1
Item model number ‎EE101WLS-1
Item Package Quantity ‎1
Item Weight ‎3.84 ounces
Light fixture form Wall
Light fixture form ‎Wall
Light Source Type ‎LED
Luminous Flux ‎100 Lumen
Manufacturer E E Systems Group, Inc.
Manufacturer ‎E E Systems Group, Inc.
Material Plastic
Material ‎Plastic
Number of Light Sources ‎1
Part Number ‎EE101WLS-1
Power Source ‎AC/DC
Product Dimensions 5 x 3 x 3 inches; 3.84 Ounces
Product Dimensions ‎5 x 3 x 3 inches
Product Dimensions ‎5"L x 3"W x 3"H
Shade Color ‎White
Shade Material ‎Glass
Special Feature ‎Dimmable, Motion Sensor
Special Features ‎Dimmable, Motion Sensor
Style Contemporary Lighting
Style ‎Contemporary Lighting
Switch Installation Type ‎Ceiling Mount,Wall Mount
Voltage ‎120 Volts
Wattage ‎1 watts
Wattage ‎70 Watts

2.9

13 Review
5 Star
53
4 Star
16
3 Star
10
2 Star
7
1 Star
15

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: R. Feinberg
Turns A Regular Light Into A Motion Sensor Light - Scare Burglars And Animals Away!
This thing is so cool! I have a light on my backyard patio that I wanted to scare off anybody walking back there and I especially wanted to scare off deer and rabbits that were eating my plants at night! This is it! I just set the few little settings on it for how long I wanted the light to stay on when it sensed motion, at what distance I wanted it to sense motion and whether I wanted a dim light ("Moonlight" which is the gray ring around it in the picture) on all night and have the lightbulb come on when it sensed motion or NOT have the dim Moonlight feature on al night and just have the lightbulb come on when motion was sensed. Then screwed the eSenlite into the socket, then a lightbulb into the top of the eSenlite and turned the wall switch on (see pic) and everything was all set! What a great little invention! I hope they apply for a patent for it! It's genius! I love it and it was just what I was looking for and more than I was hoping for! Quality product + excellent customer service + speedy delivery = I couldn't be happier!!
Scritto da: Jose Santaella Velez
The suggested default settings did not work for me.
Please don't get me wrong; I acquired one; when the default settings did not work, I did ask to exchange it, nevertheless the replacement from Amazon did the same thing so I test one by one manual settings until I found one that worked for me. Even when manufacture said the case where the light will not affect the motion sensor it seems do. Now I have two of them working. It may take a bit of (Frustrating) time to find the correct setting wonder if Amazon consider providing more Info or a bit more time.
Scritto da: Gerald
Great Feature Promises, But, Falters on Delivery for me.
The good first. The unit seems well made, has a decent feel in the hands, and looks reasonably attractive, fitting in to my garage ceiling setting quite naturally. Having screwed it in and out an interminable number of times during my testing to make adjustments, there was never any feeling of fragility, looseness, or of wearing out. Lastly, when ambient lighting from the nearby window or open garage door reaches a sufficient level, the unit faithfully switches from Moonlight to off. I really liked the idea of this Motion Sensor Activated Light Socket. What I got is far from ideal, as there appears to be some circuit crossover/crosstalk, deep within its logic center, perhaps coming from poor execution of design or manufacture. Let me explain with the outcome of hours of testing with a 13W Bright White LED Bulb as ambient lighting for a walkway/ramp in our garage. Please Note: If my experience is related to a quality/inconsistency issue, YMMV!!! The unit's has 5 configuration switches near its base (S1S2-S3S4-S5), and are presently set as: 00-01-1. This should provide: 5 seconds of "on" time, up to 19 foot detection range, using SMART mode. It actually provides: ~15 minutes of "on" time (once as low as ~5 minutes), at least 14 feet of range, and in SMART mode. I want 60 seconds of "on" time (AKA 01-01-1) with each detection, but I can't get it with S4 at "1". Any time the S4 switch is in the "1" position, the clock circuit loses it mind, and opens the extended and sometimes random 'box of time chocolates'. With S4 in the "0" position, "00"(S1 & S2) consistently gives ~5 seconds as specified on the instruction sheet, but flip S4 to "1", and all hope of following the spec is lost. Unfortunately, S3S4 as "10" does not provide the required range needed for comfort/safety. Actually, this range setting fell short, as standing at 10-12 feet at one location waving my hands, had no effect, while with the same setting in another location at 14 feet, I was easily detected. Thus, the coverage seems to be lobed versus a circular pattern. On the other hand, S5 always gives either the "AUTO/0" mode, or the "SMART/1" mode, without regards to S4's position. I started out planning to only use "AUTO", but I've come to like the "SMART" mode, because when it is very dark you have a little light to let the person (just out of range) know a light is there. I was going to return the unit the next day after completing this testing, but I'm keeping it. The 19 foot range setting covers the two doors I need it too (actually seeing through the glass door when its solid inner door is opened), and the looonnggish "on" time per detection is better than the target light being on 14 hours straight each day. So, it "is", better than nothing! It's hard to imagine buying another unless I can use the shorter ranges, but it is about half the price of adding control of this light to my home automation system (with which I'd have accurate "on" times and consistency 24/7/365. HhMmm!)
Scritto da: Claybourne Hart
Program
You need to do a quick adjustment on the pins. After that it's perfect ????????
Scritto da: Duchess of Toad Manor
Long lastings
I bought two of these for our vacation home about 5 years ago. They are still working great. Would recommend as a workable substitute if you don't want to go to the expense of buying complete fixtures.
Scritto da: Marc
Awesome!
I had a light switch with motion detection built in, but you had to be almost right in front of it to pickup motion. I swapped out to the bulb with this socket and it works way better. I have this setup in the hallway steps to the basement and it properly picks up when you are at the top or the bottom of the stairs. It's the little things like this that had me saying out loud, "that is pretty cool". And no more waving my arms around like a crazy person trying to get the old wall sensor to pick me up.
Scritto da: Jh
Doesn't want to turn off
Bought this for attaching led lights to it, as my previous one wouldn't work with them. No problem on install or activation using the control switches. Only issue is that it doesn't want to turn off. It's in a basement, so only movement is when we are in area. It just doesn't turn off. Even after 24+hrs.
Scritto da: Amazon Customer
Works great
Fits well and definitely responsive to movement. I just have the wrong fixture but a great product.
Scritto da: Stephen Sagar
Works well as expected
This installs easily and the dip switches are easy to set to set sensitivity of motion and how long it stays on. Using an LED bulb in the socket — the built in dim light is a great asset. Motion switches on your installed bright bulb. I did have some issues with the bright light staying continuously on after having it for 6 months. It has a 2 yr warranty and the company responded to email and replaced it straightaway. This really gives confidence in this company. Highly recommended as an outside porch light, but many other uses. The radar detection more effective than infrared, working through the glass enclosure.
Scritto da: Amazon Customer
Reliability is not always 100%
I ordered a 2-pack of eSenlites and only 1 of the eSenlites is performing correctly per the illustrated setting instructions. I will see how well they perform over time.
Scritto da: Amazon Customer
Works through frosted glass!
We were doubtful that this would work through our new white frosted glass fixtures but it is working well!
Scritto da: Troybay
Good Value
The 2-pack makes it a good value. Radar detection more accurate than PIR detection units that I purchased in the past. Dip switches allows flexible customizations. I'm using one in a hallway, and the other outside to light up the driveway.
Scritto da: Denis
Très bien
Pour mon garage

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array