Ergonomisk Joist Mount Pull Up Bar fra Ultimate Body Press

Brand:Ultimate Body Press

3.8/5

kr
1031.13

Joist Mount Pull Up Bar Den nye ergonomiske Joist Mount Bar fra Ultimate Body Press sætter en kommerciel fastmonteret pull up bar i ethvert hjem med synlige bjælker eller strøer. Ved at give en mere naturlig håndposition hjælper den ergonomiske stangs finjusterede vinklede greb dig med at undgå over artikulation af skuldrene og reducere belastningen på dine håndled og albuer for øget gevinst på kortere tid. Pull Up Bar-funktioner• Tilføj hurtigt styrke og kvalitetsmuskler til skuldre, ryg, arme og kerne• Heavy duty svejset stålkonstruktion – leveres fuldt samlet• Inkluderer bjælkemontering pull-up bar hardware og instruktioner for garanteret nem montering• Bestil med tillid – dit køb inkluderer USA teknisk support og 100 % tilfredshedsgarantiBedre træning hver dag. svejset stålkonstruktion og 1,25” rør, Joist Mount Bar fastgøres nemt til dit hjems synlige bjælker eller strøer. Bjælkemontering giver fleksibilitet i placeringen og hjælper med at bevare gulvpladsen. Bjælkemontering er også ideel til faldlofter med 3" eller mindre hulrum mellem loftpladerne og bjælken. Hjørnestenen i et Full Body Gym En monteret pull up bar er det ideelle anker til pull up bar tilbehør som Bodyweight Resistance Trainers. Bodyweight Resistance Trainers udvider din pull up bar-træning med sammensatte bevægelser i hele kroppen og trinløs modstand fra din kropsvægt. Bodyweight Resistance Trainers muliggør assisterede pull-up-variationer, der lader alle arbejde op til fulde pull-ups med komplette pull-up-sæt lige fra dag ét.Shop med selvtillid Hos Ultimate Body Press er vi stolte af at kunne betjene dit fitnesscenters behov og ønsker at overgå dine forventninger til kundeservice . Kundeservice har komplette ressourcer til at hjælpe dig og er tilgængelig via telefon eller e-mail. Din tilfredshed er 100 % garanteret, bestil din Joist Mount Pull Up Bar i dag.

KØB MED TILLID: Den ergonomiske bjælkemonterede Pull Up Bar er understøttet af Ultimate Body Press mod producentens defekter i 10 år. DESIGNET I USA: Ultimate Body Press er en virksomhed i North Carolina, der er forpligtet til at levere bedre træning hver dag. Inkluderer Prime kvalificeret forsendelse og USA kundeservice. IDEAL ANKER: Anker valgfri Bodyweight Resistance Trainers for at forvandle din pull up bar til et træningscenter med fuld kropsvægt. Gennemfør komplette sæt pull ups og andre udfordrende øvelser lige fra dag ét med assisterede træningsvariationer. [solgt separat]. LET INSTALLATION: Joist Mount Pull Up Bar er præcisionskonstrueret til nem installation i hjemmet og inkluderer monteringsvejledning, komplet hardware og teknisk support fra USA. ALT SVEJSET STÅL: Den stive monterede Joist Mount Pull Up Bar understøtter fokus på formen, så du effektivt kan øge gentagelsestal i 3 grebspositioner. Tykke 1,25" rørbeslag med 16" stigrør for total frigang. JOIST MOUNT PULL UP BAR: Optræksstangen i helt stål til boliger med synlige bjælker eller strøer. Ergonomisk stang giver en mere naturlig håndposition for at reducere skulderartikulation og belastning af håndled og albuer for bedre træning og øget overskud.
Age Range (Description) ‎Adult
Brand Ultimate Body Press
Brand ‎Ultimate Body Press
Brand Name ‎Ultimate Body Press
Color Black
Color ‎Black
Customer Reviews 4.7 4.7 out of 5 stars 380 ratings 4.7 out of 5 stars
Included Components ‎Ergonomic Joist Mount Pull Up Bar
Item Dimensions LxWxH ‎48 x 1.25 x 15 inches
Item Package Dimensions L x W x H ‎38 x 12 x 3.5 inches
Item Weight ‎6.5 Pounds
Manufacturer ‎Ultimate Body Press LLC
Material Alloy Steel
Material ‎Alloy Steel
Maximum Weight Recommendation 500 Pounds
Maximum Weight Recommendation ‎500 Pounds
Model Name ‎Ergonomic Joist Mount Pull Up Bar
Model Year ‎2015
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Package Weight ‎5.38 Kilograms
Part Number ‎JMP-S
Suggested Users ‎Unisex-Adult
Warranty Description ‎10 Year Limited

3.8

13 Review
5 Star
79
4 Star
16
3 Star
2
2 Star
2
1 Star
2

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Dude
A really nice bar
The bar that I received was quality perfect. Everything was straight with no issues with welds, paint, etc. I used the included bolts for two of the top holes and I used two lag bolts that I bought for the bottom holes. This made it easier to get to in my case. So like anything else that you buy sight unseen you can get good and you can get not so good. This bar was perfect in every way. YMMV
Scritto da: DandyRandy
Great pull-up bar!
Love it! Only complaint is that it is smooth and makes it harder to keep a grip. I put a little duct tape on where I hold on or you can use some weight lifting chalk. Having it right out the door to my garage makes me more consistent and I am up to 3 sets of 6 Marine pull-ups - full extension and no knee ups.
Scritto da: Buzz H.
Nice Bar
Very good quality for the price. All welded hollow construction of adequate gauge, powder coated steel, with heavy black phosphate bolts included. Should be long lasting for all but the very most strenuous gym use. I wrapped with grip tape to give better purchase. Note: I think the two things this bar is missing are easily added. The first is a block of material to place inside each square tube, under the bolts, to keep the tube from collapsing or deforming when the the bolts are torqued very tight. I used a piece of oak scrap wood I had on hand and drilled holes with the wood inserted inside the tube. The second is four additional washers to place under the nuts being fastened down against wood, since I used the ones which came with the kit on the bolt head side. With the added washers and material inside the tubes, I was able to torque the assembly much tighter than would be otherwise possible, making the installation overall much tighter, more solid, and less likely to shift and loosen over time. I’m very happy with this bar, it should last a very long time.
Scritto da: Techjunkie
Perfect at highest mounting position. Read my installation tip.
This is my second pull-up bar. The first, a ceiling mounted straight bar installed in my finished garage, would have hung too low to move to the basement. This ergonomic grip, rafter-mounted bar is perfect for the new location. It measures 16.3 inches top to bottom. Mounted with its top adjacent to standard 7” rafters, it provides 8” of clearance between the bottom of the rafter and the top of the lowest parts of the crossbar. Being that my quarter basement ceiling is low, I have to bend my knees to avoid touching down between reps, which is perfectly acceptable in exchange for not smashing my head at the top of the reps. Hardware was included and installation took only a few minutes. I discovered it was easiest to use a 3/8” bit instead of the recommended larger 7/16” bit. Rather than installing one bolt and then marking the remaining three spots with a pen, I opted to hold the bar in place and just drill through it for the last three holes. This allowed me to drill level and true so the bolts (which fit snugly through the smaller than recommended holes) lined up with ease. I prefer the ergo shape to my straight bar and have yet to hit my head. If a drop ceiling were installed, I’d have mounted it as low as possible instead.
Scritto da: Joe K.
It will work if you do
It's not quite all steel. The end caps are plastic and as you can see in the photo this one either slipped through the QC process or construction isn't so premium. Regardless, it's a pull bar so not worth the hassle of returning it but, also no need to gush about it either. As for installation, I would not say it was difficult, but whoever said 10 minutes needs a new watch. It took about a half hour with some effort to ratchet the mostly unthreaded bolts through the under-sized nuts, and the cheap wrench provided (about the thickness of two layers of tin foil) was useless. Note to manufacturer, save yourself some money and just skip the wrench. With all that said, it's sturdy, solid, and a good size. Again, it's a pull up bar and this one will work if you do.
Scritto da: Kersi Von Zerububbel
Solid. No wobble. No wiggle. No rocking. Just basic, solid pull-up bar.
My garage does not have 2x6 joists but 2x4 rafter ties. I had to install it on a 3x12 patio beam. Hopefully the grip tape I used will hold back the rust. I also painted joints to give more rust protection. This is a SOLID, well-made product that is a good value. No rocking. No wobble.
Scritto da: AVe
Perfect garage pull up bar
This is great for open rafters in a garage. After replacing door frames and doors to white, I can no longer use a door jam pull-up bar because they leave black streaks or require holes drilled in the frame. This was a perfect option. 2-stars on the install, because you have to get in a ladder, measure, drill holes, and install nuts and bolts. That’s not a reason not to order this if you have a permanent spot picked out. This is solid, has different angles hand grips, and I am happy with my purchase.
Scritto da: Eli
Easy to install , solid contruction.
Just installed it and banged around. Im 5'9 160 lb. Its sturdy enough for pull ups chin ups and hanging leg lifts. The hardware provided was more than adequete. My floor joists are old so they really are 2 inches thick. For modern housing or a bigger person id use fender washers, or coorisponding strapping between the bolts. Cant beat the price for the quality. Solidly built with a comfortable grip.
Scritto da: JV
Great pull up bar!
I'm very happy with this pull up bar. I hung it on a joist in my garage and it's been holding up great. The bar is not textured so you'll have to add your own grip to it. I prefer it smooth so this is not an issue for me.
Scritto da: Chris
Worth the money
Great pull-up bar, I really enjoy the Chinup grip on this one. I used to prefer doing pullups rather than Chinups, but the ergonomic grip feels very comfortable. I suffered a shoulder injury and doing Chinups on this bar gives me very little shoulder discomfort. Very happy with the purchase.
Scritto da: ODoyleRules
Great quality, may need gloves to use it
Very nice product for unfinished basements. It was easy to mount myself. I used a smaller drill bit than they require since I did not have the correct one and just drilled it out a little more. I then used a hammer to push through the bolts. The bar doesn't move at all. I wish there was a better grip option, the bar is slippery without gloves one.
Scritto da: Michael Dafoe
Very Good
My son loves it!!
Scritto da: CNNC
Five Stars
Great product.

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array