E-Z LOK Gevindindsats til Plastic Flush Messing Gevindindsatser 2-56 Pakke med 50 stk.

Name: E-Z LOK Gevindindsats til Plastic Flush Messing Gevindindsatser 2-56 Pakke med 50 stk.
Brand: E-Z LOK
SKU: 0839137005196
Price: 264.16 DKK
Availability: InStock

Brand:E-Z LOK

3.7/5

kr
264.16

E-Z Press Gevindindsatser til plast E-Z LOK Gevindindsatser til plast giver overlegen holdekraft. Messinggevindindsatserne og gevindindsatserne i rustfrit stål er designet til efterstøbningsinstallation til montering af maskingevind i enten hærdeplast, termoplast eller 3D-printede dele. Et slidset design giver mulighed for kold installation af disse metalgevindindsatser uden behov for opvarmning, hvilket eliminerer behovet for at jage gevind efter installationen. Derudover reducerer det omkostningerne til støbninger og reducerer kasseret affald. Tilgængelig i 3 stilarter: glatte gevindindsatser, flangegevindindsatser og omvendte spaltegevindindsatser. Alle tre typer trykkes på plads for hurtig og nem installation. Funktioner Indsatser installeres koldt - ingen opvarmning nødvendig Eliminer behovet for at jagte gevind efter støbning Reducer omkostninger og spild Installer korrekt uden en præcis huldybde

Beløb

Tilføj til kurv Køb nu

EAN: 0839137005196

Kategorier Industri og videnskab, Søm, Skruer og fastgørelsesmidler, Møtrikker, Møtrikindsatse,

STÆRKE TRÆDER GØRET LET - Alle tre typer gevindindsatser trykkes på plads for hurtig og nem installation. TILGÆNGELIG I 3 STYLER – Tilgængelig i flush-gevindindsatser, flangegevindindsatser og omvendte slidsgevindindsatser. TIL BRUG MED APPLIKATIONER – De gevindskårne indsatser til plast er designet til efterstøbningsinstallation i enten hærdeplast, termoplast eller 3D-printede dele. LET INSTALLATION - Et slidset design giver mulighed for kold installation af disse metalgevindindsatser uden behov for opvarmning, hvilket eliminerer behovet for at jage gevind efter støbning. GEVINDINDSÆTTER TIL PLAST – E-Z LOK Gevindindsatser til plast. Fås i gevindindsatser af messing og gevindindsatser i rustfrit stål. Installer koldt.

Color	Gold
Country of Origin	USA
Exterior Finish	Brass
Fastener Type	Push-In
Item model number	240-002-BR
Manufacturer	E-Z LOK
Material	Brass
Product Dimensions	0.15 x 0.13 x 0.13 inches; 0.46 Ounces
Thread Size	#2-56

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Scott L Morris

Fit snugly in a 3D printed 6.5 mm hole

I use these in 3D prints and they work great, I use a 6.5 mm hole but your printer may behave differently but once you get the size dialed in these are great.

Scritto da: Robot Power

Item as described but did not work in HDPE plastic

These items are as described by the mfr. However, they totally failed in my application as threaded inserts for HDPE plastic. I made sure the pilot hole dimensions were exact with my CNC mill and pressed them in with a proper arbor press. These inserts pulled out very easily. I'm thinking perhaps the split being on the bottom side actually pushed them out as the screw was inserted because they spread most at the bottom. Don't know for sure but they didn't work and pulled out very easily in my application. I have used the flanged top models with the split at the top. Those ones with the same mounting hole dimensions locked in like a rock and cannot be pulled out without destroying either the plastic or the insert. So they work properly. In the correct material (wood?) I assume they will work but they didn't work well for me hence three stars.

Scritto da: Matthew

If you REALLY need tiny size, these are fantastic

They are strong, they hold in place extremely well. Due to the design, it can be difficult to install perfectly aligned in plastic. I would recommend seeking out the correct installation tool rather than trying to 'make do' with a soldering iron. Due to the design, I would suggest these are better for fit and forget installs, rather than end user, as the screws when turned are difficult to get it, squeak, and potentially can end up cracking plastic if not careful. These seem to be intended for locking the screws in place, as well as the part itself. Do I recommend them? Yes. Just be sure you need these and what they are used for.

Scritto da: APClam

These work great with PETG prints!

These are very good quality threaded inserts and these work perfectly with my PETG 3D prints. Just make sure to get an appropriately sized reamer for the recommended size hole and ream the hole to spec before trying to press fit the insert. I’ve used dozens of these now and the way they expand when the fastener is screwed down into gives them an incredibly strong hold. I’ve found that adding a tiny drop of light machine oil onto the fastener helps to eliminate the squeaking sound you might otherwise hear when tightening it down. Also makes it easier to tighten properly. Highly recommend!

Scritto da: prime numbers

Five Stars

Expensive but do the job