DROK 200085 3v til 5v Boost Converter, Slank DC 3-5v til DC 5 V 3A Step Up Spændingsregulator Modul Volt Transformer Board Strømforsyning

Name: DROK 200085 3v til 5v Boost Converter, Slank DC 3-5v til DC 5 V 3A Step Up Spændingsregulator Modul Volt Transformer Board Strømforsyning
Brand: DROK
Price: 212.52 DKK
Availability: InStock

Brand:DROK

3.1/5

kr
212.52

Parametre: Arbejdsspænding: DC 6V-90V (udgangsspændingen er 0-100 procent af indgangsspændingen) Potentiometer: Modstand B10K; Linje 20 cm; Hul 8mm Kontroleffekt: 48W-720W Nominel strøm: 8A Maksimal strøm: 15A Hastighed Justerbar rækkevidde: 0%-100% PWM Frekvens: 16KHZ Dimension: 64 89 28mm Nettovægt: 75g Bemærk: Strømforsyningen skal være DC, kan ikke være AC, ellers vil DC-motorhastighedsregulatoren blive brændt. Sørg for, at forbindelsen til strømforsyningen er korrekt, ellers vil hastighedsregulatoren blive brudt. Det positive og negative af motoren kan ignoreres, når køreretningen ikke er i overensstemmelse med forventningerne, kan du justere rækkefølgen af kablet for at ændre orienteringen. Juster potentiometerknappen, som kan ændre outputtet, der optager tomgangsandel af controlleren, for at ændre motorhastigheden. Pakken indeholder: 1 x DC Motor Speed Controller

Beløb

Tilføj til kurv Køb nu

EAN:

Kategorier Værktøj og boligforbedring, Electrical, Electric Motors, Beslag & Tilbehør, Controls,

Tilslutning af ekstern positiv negativ kontakt kan opnå positiv inversionsfunktion. Kan styres af ekstern 0-5V, og bruges på PLC til at styre motorhastighed direkte. Juster knappen på potentiometeret for at ændre udgangen, der optager tomgangsandelen af controlleren, og motorhastigheden vil ændre sig. Juster rækkefølgen af kablet for at ændre retningen; kan styre motorhastigheden til at skifte fra 0 procent til 100 procent, og den er støjfri, når motoren er ved lav hastighed. Med en standardstørrelse (5mm*20mm) 15A hurtigsmeltende keramisk sikring, og strømomvendt forbindelsesbeskyttelse og overspændingsbeskyttelse, mere sikker at bruge.

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	200085
Manufacturer	DROK
Package Dimensions	5.4 x 3.3 x 1.8 inches; 3.53 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: WH7QQ

Works well and was easy to hook up.

Amazon, for some weird reason, on my orders shows this as an "up" converter which it absolutely IS NOT. It is a very usable PWM type speed control for DC motors. I have it working to control the DC gear motor from an old battery drill and it gets its power from a DC power supply from an old, dead laptop (18v 6A). It does my job perfectly. If you are looking for an up converter, look elsewhere.

Scritto da: GT

Works properly, no problems

What I ordered was "Motor Speed Controller, DROK DC Motor Speed Control 6V-90V 15A 1000W 16KHZ PWM Controller 6V 12V 36V 60V 90V Speed Regulator Module Board Support PLC Control " and that's exactly what I got. I installed it and it works without issue. MUCH cheaper than replacing the entire unit. A+

Scritto da: MARIUS

Easy to use but it doesn't have Forward/Backward function

I intended to use the product together with a Raspberry Pi and realized shortly that it doesn't have a built in Forward/Backward function. Everything else is good.

Scritto da: LUIS PEÑA

Excelente controlador

Es muy fácil de usar. Lo usé para controlar la velocidad de un motor reductor que acondicione a mi máquina de coser...

Scritto da: brian collinsworth

Awesome

Works great. Slowed my scavenge pump down to quiet it up.

Scritto da: John Gennero

Works well

Does exactly what it's supposed to do. Would buy again.

Scritto da: Earthly Traveler

Reliable so far.

Work as promised, no complaints.

Scritto da: Olle Gladso

Great for controlling relatively high voltage DC loads.

Perfect! I use it as a controller for an electric resistance heater in an electric vehicle.

Scritto da: Tate

Great voltage converter...

I used this to drop 18 vDC from an M18 Milwaukee power tool battery to 12 vDC output to operate a kid's electric ATV ride-on. The Milwaukee (or your own favourite tool manufacturer - yellow, green, orange, whatever) batteries are easier and quicker to charge than the OEM gel battery which is lead-acid. This allows me to adjust the output so that I don't overload the 12 vDC motors...or add a "turbo" feature for more excitement! Note: the potentiometer is a 10 k-ohm one and the circuit board needs to be under load to see the true motor output. If you test the motor voltage while not loaded, it won't show much difference from the input battery voltage. Basically, it works and works well.

Scritto da: Amazon Customer

Works Great

Using it to power my girls Power Wheels with a couple of 18V batteries and this items works perfectly for this. I've tried a couple of the other ones with a lower current rating and they burnt out after a short while. I wouldn't hesitate to buy another one of these should I need a similar converter.

Scritto da: Daniel G.

No component numbers

It seems to work with the included potentiometer. However it seems that the component numbers have been erased from the IC and all of the MOSFETs, so there is no way of telling what the circuit is. I needed to make some changes to work with a hall sensor throttle but I can't tell what the components are. I don't understand this seemingly deliberate obfuscation.

Scritto da: Marcel Bourgoin

seems to work ok

heat sinks a little small when using above 60 V @ 10 A it over heats

Scritto da: Amazon Customer

Good choice

worked asnavertized no problem setting