Delta Armatur Essa Oil Rubbed Bronze Køkkenarmatur, Køkken Armaturer med Pull Down Sprayer, Køkkenvask Armatur, Vandhane til køkkenvask med magnetisk docking sprayhoved, Venetiansk Bronze 9113-RB-DST Venetiansk Bronze Uden Sæbedispenser Standard

Name: Delta Armatur Essa Oil Rubbed Bronze Køkkenarmatur, Køkken Armaturer med Pull Down Sprayer, Køkkenvask Armatur, Vandhane til køkkenvask med magnetisk docking sprayhoved, Venetiansk Bronze 9113-RB-DST Venetiansk Bronze Uden Sæbedispenser Standard
Brand: DELTA FAUCET
SKU: 0034449787062
Price: 3900.71 DKK
Availability: InStock

Brand:DELTA FAUCET

3.7/5

kr
3900.71

FRA PRODUCENTEN Siemens 1-tommer Hub til brug på Siemens eller Murray paneler, der kræver en HR type hub. Tjek panelets ledningsdiagram for at bestemme, hvilken navtype der kræves.

Beløb

Tilføj til kurv Køb nu

EAN: 0034449787062

Kategorier Værktøj og boligforbedring, Kitchen & Bath Fixtures, Køkkenarmaturer, Køkkenarmaturer, Kitchen Sink Faucets, Tryk på køkkenvaskarmaturer,

LIVSTIDSBEGRENSET GARANTI: Du kan installere med tillid, vel vidende at denne køkkenhane er understøttet af Delta Faucets livstidsbegrænsede garanti. LET AT RENGØRE. Delta køkkenarmaturer med Touch-Clean sprayhuller giver dig mulighed for hurtigt og nemt at tørre kalk- og kalkophobninger væk med et fingertryk, så ingen grund til at gennembløde eller bruge kemiske rengøringsmidler. LET INSTALLATION: Designet til at passe enkelt-hul eller 3-hul, 8-in. konfigurationer. Alt hvad du har brug for er samlet i én boks, inklusive en valgfri dækplade til 3-huls installation og InnoFlex PEX forsyningsledninger, der er integreret i vandhanen for et mindre lækagepunkt. MAGNETISK DOCKING: MagnaTite Docking bruger en kraftig magnet til at klikke din køkkensprøjte på plads, så den forbliver forankret og ikke hænger ned over tid som andre køkkenhaner. HOLDER 2X LÆNGER: Patenteret DIAMOND-tætningsteknologi reducerer lækagepunkter og holder dobbelt så længe som industristandarden – hvilket sikrer lækagefri drift i hele køkkenarmaturens levetid (industristandarden er baseret på ASME A112.18.1 på 500.000 cyklusser).

Batteries Included?	‎No
Batteries Required?	‎No
Brand	DELTA FAUCET
Brand	‎DELTA FAUCET
Color	Venetian Bronze
Color	‎Venetian Bronze
Customer Reviews	4.6 4.6 out of 5 stars 11,550 ratings 4.6 out of 5 stars
Finish	‎Bronze
Finish Type	Bronze
Finish Type	‎Bronze
Handle Location	‎Single-Hole Deck-Mount
Handle Type	‎Lever
Included Components	Faucet
Included Components	‎Faucet
Installation Method	‎Widespread
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎1.25 x 11 x 15.25 inches
Item model number	‎9113-RB-DST
Item Package Quantity	‎1
Item Weight	‎6.56 Pounds
Manufacturer	‎Delta Faucet Company
Material	Metal
Material	‎Metal
Maximum Flow Rate	‎1.8 Gallons Per Minute
Model Name	‎Standard
Mounting Type	Single-hole
Mounting Type	‎Single-hole
Number of Handles	1
Number of Handles	‎1
Number Of Holes	1
Number Of Holes	‎1
Part Number	‎9113-RB-DST
Pattern	‎Faucet
Product Dimensions	‎1.25 x 11 x 15.25 inches
Recommended Uses For Product	Kitchen
Recommended Uses For Product	‎Kitchen
Size	‎Without Soap Dispenser
Special Feature	Pull Down Sprayer
Special Feature	‎Pull Down Sprayer
Special Features	‎Pull Down Sprayer
Spout Height	‎15.25 Inches
Spout Reach	‎9.25 Inches
Style	‎Standard
Valve Type	‎Euromotion DIAMOND Valve
Warranty Description	‎Other

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Busy Engineer

Seems to be a good value & works well, simple mechanical valve avoid the headaches of touch type

We like the quality & style of this faucet. Simple mechanical valve to avoid the automation headaches of touch It has been in use for only about 16 days, so time will tell how well it will holdup. It replaces a over 15 year old (several valve rebuilds along the way) Delta that needed a new pullout faucet head, that is the sprayer & the parts were no longer available. This old faucet had the separate valve body that mounted to the counter top independent of the faucet, because of the asymmetrical sink design a typical faucet with a Escutcheon would not work. Faucet needed to be in the far right hole to reach the much larger side of the sink Not that hard to install, if you are handy or experienced with replacing a faucet ---> Faucet was direct mounted to our 1 1/4 (1.25) inch thick, stone countertop ---> We decided to mount the faucet with the handle in the Center, closest to the sink. This way you can turn the water off with the back of your hand & keep the water dripping from your fingers over the sink. Instead of dripping water on to the counter top every time you touch the valve handle wit wet hands. I Used - Westbrass 2" Kitchen Sink Hole Cover, Stainless Steel, D202-20 https://www.amazon.com/dp/B00403BXWC to seal the extra hole in the stone countertop - (great product see my review) The directions ... they are not very good for non technical or those without experience changing faucets .... the directions are not custom to this faucet -- You will need to figure-out which part of the universal directions apply / is closest to your faucet. The hardest parts? 1) Removing the 15+ yr old faucet .... brass nut & brass threads of faucet were a bit crusty & the valve body above the counter started turning, As this was going to be scrap ... I used vice-grip pliers & a thick rag against the backsplash to keep it from turning. 2) Next was keeping that thin plastic base-plate centered, under the new faucet during the install as it kept moving. (poor design IMO) ---> Delta needs to rethink that design -- It Should snap into place & stay there Steps 1a) Know where & how to turn off the water to the entire house & test that the valve works. If things go poorly you will want to know it works. The valves under the sink do not always work or stop all water flow. Stuff happens 1b) If you have a well, know how to turn it off & how to valve off or drain the pressure. 1c) Wear eye protection ... stuff is going to fall in your face while your on your back & working under the sink 2) Shut off water under sink & test that water does not come-out of the faucet. Always support the valve body while turning the valve handle, to keep stresses off of the pipe. 3) With bucket or rags handy remove the waterlines to the old faucet. Expect 1/4 to 1/2 cup of water to drain from the lines. Always support the valve body with a second wrench, while turning nut to water line to keep stresses off of the pipe. 4) Install the faucet into the counter. Confirm the location & orientation of the faucet before your final tightening. Having a second person handy to check the final location, before you complete tightening the nut, helps limit the up/down trips, under the cabinet. 5) Connect the water supply lines to the valve. Always support the valve body with a second wrench, while turning nut to water line to keep stresses off of the pipe. 6) Flush the valve set, let some water (1 gallon should do) run through the Hot & Cold sides - catch what comes out of the faucet feed line, in a container. If you have a second person they can operate the faucet valve from above the counter. Solo install ... Open the valve on faucet body, so hot & cold water will flow & then use the water supply valve under the sink to control the flow into your bucket. 7) Install the sliding counter weight --> then make the connection to the pullout faucet ---> Install the locking clip & test that it is locked 8) Open water valves under sink. Always support the valve body while turning the valve handle, to keep stresses off of the pipe. 9) Check for leaks, open valve on faucet & check flow & then look under counter & inspect for leaks again Things that Helped: ---> I used the floor mats from the kitchen to make laying on the cabinet edge much more comfortable. ---> I used the correct size of combination wrenches & a deep sock with extension & a ratchet drive, to speed up the install. ---> To remove the old faucet, I used a basin wrench & vice-grip pliers to hold the old valve (from spinning) to get the nut off when the threads got a little tight. Brass threads to old faucet getting a little crusty in 15+ years was expected

Scritto da: MIA

Really nice faucet!

Our old kitchen faucet decided to go potty (under the sink) about 3 weeks before Christmas ('22). We have an older stainless steel sink with the 4 holes. We decided on this one specifically WITHOUT the touch feature (or any other electronics). The last thing I wanted to deal with was a faucet that turned on and off just because it was moved from one side to the other. We chose the Essa style because it looks elegant, yet simple. Additionally, we didn't want a bunch of curves, fillagree, or flat surfaces to hold water (and also bacteria). This one is VERY easy to clean and looks as good as the day we bought it! We chose the Arctic chrome finish. INSTALLATION: I'm fairly handy and have some experience with home plumbing. This was not my 1st faucet install. Even still, this took roughly an hour to get it fully installed. Was fairly straightforward, but getting the base of the faucet tightened in a small space underneath and perfectly even up top was a little challenging. With my wife's help up top, I was able to get it tightened up perfectly. They do provide fairly lengthy connection pipes that CAN be looped (an 8" diameter is the max they recommend). There is roughly a 4' long hose that connects the pull-down spout with a donut size and style weight that hangs below the faucet. The design and material lead me to believe there would be virtually zero wear even after several years. The weight provides the "pull" to bring the end of the faucet back up. There is a slight magnetic catch that holds the pull-down in place. We're on a well, and our water pressure is set between 30-50psi. At the low end there's not a lot coming out, but it's certainly usable. We're about to change that too and move it up to a 40-60psi pressure switch along with a new pressure tank (all that's another story). The pull-down spout works great in the normal mode, but when switched to sprayer mode, water seems to bounce off the dishes almost everywhere. Maybe with a deeper sink, this would be better. We opted for a soap dispenser to fill in the 4th hole of the sink, but we chose the dispenser from a different Delta model to match the swooping flow of this faucet design. Overall, after a couple months of use, this faucet is outstanding! Highly recommend it.

Scritto da: Amazon Customer

beautiful to look at

easy to use, the only trick is to change it from fan spray to solid spray you need to take out the pull down faucet and change it to solid spray then hang back in. It's so nice to have

Scritto da: Lost4ever

Love this faucet!

This faucet was easy to install and works great. Good water pressure (better than our old faucet), and I love being able to turn it on and off with just a tap. Glad we spent the extra money to get it!

Scritto da: Amazon Customer

Rotation is good. Height is great

Have to be careful not to crimp the hose when pulling it out and filling a pot near by.

Scritto da: OCL

Enjoying the new tap.

Our first shipment was lost but Amazon was able to send one out immediately. Pretty easy to install. No harder than any other tap. The touch feature is nice and seems to work without a hitch so far.

Scritto da: BrandonS

Nice Faucet

This faucet is great. The only complaint is that the touch sensor is quite sensitive and sometimes drives me nuts. May just have to get used to it still - this is the first time we’ve had a touch faucet.