AprilAire 5845 luftfugterinstallationssæt til AprilAire blæserdrevet luftfugter i hele hjemmet med manuel kontrol, kompatibel med AprilAire luftfugter Model: 700M

Name: AprilAire 5845 luftfugterinstallationssæt til AprilAire blæserdrevet luftfugter i hele hjemmet med manuel kontrol, kompatibel med AprilAire luftfugter Model: 700M
Brand: Aprilaire
SKU: 0686720004049
Price: 1094.38 DKK
Availability: InStock

Brand:Aprilaire

3.3/5

kr
1094.38

Dette AprilAire 5845Z-befugterinstallationssæt indeholder alle komponenter til trin-for-trin installation af en AprilAire Whole Home-blæserdrevet luftfugter med manuel styring, model 700M. Praktisk sæt sparer dig tid og penge i forhold til at købe forsyninger individuelt.AprilAire introducerede den første fordampningsbefugter til tvangsluftovne tilbage i 1954. Siden da er AprilAire fortsat førende branchen inden for befugtningssystemer til hele hjemmet. Vores fordampningsbefugtere fungerer ved at lede vand ind i fordelingsbakken, der er placeret øverst på befugteren. Vandet er ensartet fordelt over bakkens bredde og gennem et videnskabeligt designet system af udløb. Det flyder ved hjælp af tyngdekraften over vandpanelets fordamper. Tør, varm luft fra HVAC-systemet føres gennem den fugtfyldte vandpanelfordamper. Naturlig fordampning finder sted, hvilket betyder, at vandet omdannes til damp, og den befugtede luft cirkuleres i hele dit hjem. HVAD ER I KASSEN?Model 50 strømsensorrelæ (24V)10 fod 18/2 termostatledning(4) Twist- På trådmøtrikkonnektorer25-fod 1/4-tommer OD-forsyningsrør10-fod 1/2-tommer ID afløbsrør5/8-tommer slangeklemme(4) #8 x 1-tommer selvborende skruer

Beløb

Tilføj til kurv Køb nu

EAN: 0686720004049

Kategorier Geredskaber, Industri og videnskab, Tilbehør til store apparater, Luftfugterdele & tilbehør, Accessories,

ELEKTRISKE KOMPONENTER FOR FUGTER: AprilAire strømfølende relæ Model 50, 18/2 termostatledning (10 fod) forbinder manuel kontrol (humidistat) til befugter, og (4) vridbare møtrikker. FUGTER VVS-KOMPONENTER: ¼ udvendig diameter (OD) Vandforsyningsrør (25 fod) forbinder befugter til en vandkilde, ½ indvendig diameter (ID) afløbsrør (10 fod) forbinder befugter til gulvafløb, og ⅝ slangeklemme fastgør afløb Rør til afløbsforbindelse. FUGTERMONTERINGSKOMPONENTER: (4) #8 x 1-tommers monteringsskruer fastgør luftfugteren til ovnens lufttilførsel eller returkanal. KOMPLET INSTALLATIONSSÆT: Ingen grund til at finde delene selv! Dette sæt indeholder alle komponenter til installation af en AprilAire Whole Home ventilatordrevet luftfugter med manuel kontrol, model 700M. Reference installationsinstruktioner og skabelon inkluderet med hver AprilAire luftfugter før installation. KØB MED TILLID: Dette ægte AprilAire luftfugterinstallationssæt blev designet og fremstillet i USA af AprilAire – opfinderen af hele hjemmets fordampningsbefugter og førende inden for indendørs luftkvalitetsløsninger, for at optimere installationen af AprilAire hele hjemmeventilatordrevne luftbefugtere med manual Styring.

Brand	Aprilaire
Color	Black
Country of Origin	USA
Item model number	5845Z
Manufacturer	Research Products Corporation
Model Name	Humidifiers Parts and Accessories
Product Dimensions	0.5 x 120 x 0.5 inches; 2.25 Pounds
Product Dimensions	0.5"D x 120"W x 0.5"H
Special Feature	Whole-Home Humidifier Installation Kit

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Conic

Really good kit but more than I need.

This kit comes with a Current Sensing Relay and 18/5 wire I did not need for my installation. The installation instructions that came with my humidifier comes with several options and I carefully followed one of the recommendations. The kit also includes plastic tube for the water feed. Although the tube is rated for up to 160F, the instructions on the saddle valve that comes with the humidifier specifically says not to use plastic tubing. I went with copper just to be sure but do suspect the plastic in the kit would be fine. By buying just what I needed, I saved over 1/2 the cost of the kit.

Scritto da: J. Scholz

Made installation a breeze

This kit is a timesaver if you are looking to install your own humidifier. I am a "handy guy" and can do my own work but this was a little more daunting - cutting a breadbox-sized hole in one's cold air return plenum is a bit...harrowing. But, using the proper tools, safety gear, and taking my time with measurements and cuts, I succeeded in installing the body humidifier with relative ease. The current-sensing relay isn't well described in function: what it does is detects when your furnace blower fan starts by sensing the current in the neutral wire of the fan's furnace connection. The relay must be kept away from other magnetic fields and metal. I find it was easy enough to mount out of the way of mechanicals. The wiring given isn't quite enough for my needs. Get another 25 or 50 feet of wiring for anything beyond humidifier to transformer to relay wiring. The water tubing was much more than I needed. The provided hardware was of excellent quality.

Scritto da: AmazonCustomer

Cheaper to just by the parts you need

The title says it all.

Scritto da: Steve

This is a great product that was very simple to install

This product is used to put humidity into the air through your whole house and it works perfectly. If you are at all handy, It is very easy to install

Scritto da: Craig Carpenter

Garbage. Water line leaks.

Plastic water line will cause compression fitting to twist and leak EVERY TIME because the plastic line is softer than copper. I've gone through a handful of compression rings. I gave up. Buying copper. Do NOT Buy this overpriced garbage kit. UPDATE: since Amazon does not allow returns once you use any portion of this kit, I contacted AprilAire. I felt I deserve a little compensation. They told me, "We didn't sell it so we don't give any compensation or returns.". Basically, they do not guarantee their kit in any way. Total disregard for quality or customer satisfaction. I'll never buy another AprilAire product.

Scritto da: Michael

Get copper instead!

I ordered this manufacturer kit for my Aprilaire 700M. However, the included PEX supply line would not connect to the Aprilaire, using the parts included, without leaking. Because the connection to the valve is so deep, the line deforms, the compression ring twists, and then it leaks. I went through 3 compression rings, before giving up and buying 1/4" copper tubing. I wish I had just started with copper, it would have saved me 2 hours and an extra trip to the hardware store. At any rate, this kit is ridiculously over-priced. It's a disappointing offering from an otherwise solid company.