APEC Water Systems FILTER-SET-CTOP US Made dobbelt kapacitet erstatningsfiltersæt til Ultimate Series bordplade omvendt osmose vandfiltersystem trin 1-2, hvid

Name: APEC Water Systems FILTER-SET-CTOP US Made dobbelt kapacitet erstatningsfiltersæt til Ultimate Series bordplade omvendt osmose vandfiltersystem trin 1-2, hvid
Brand: APEC Water Systems
SKU: 0854961005228
Price: 709.44 DKK
Availability: InStock

Brand:APEC Water Systems

3.8/5

kr
709.44

APEC højkapacitets forfiltersæt er fremstillet i USA med højkvalitets filtreringskomponenter for at give et længerevarende filtersæt for at beskytte og forlænge levetiden af dit omvendt osmosesystem. Førsteklasses filtersæt holder 6-12 måneder for højtydende fjernelse af forurenende stoffer. Disse filtre i standardstørrelse er 10 og har ¼ hurtigkoblingsfittings for holdbart og nemt filterskift. Disse filtre er kompatible med APEC's Countertop omvendt osmose drikkevandssystem (RO-CTOP). Alle amerikansk fremstillede filtre med super høj kapacitet 1. trin: Højkapacitets 10 inline polypropylen sediment dybdefilter vil effektivt fjerne snavs, sand og sediment fra vandet. 2. trin: Højkapacitets 10 inline kokosnøddeskal kulfilter til at fjerne klor, smag, lugte, uklarhed og farver. Om APEC I over 17 år har APEC været en brancheførende producent, der har specialiseret sig i højtydende RO-systemer. Som den oprindelige producent har vi dedikeret et vidende og oprigtigt team, der er forpligtet til at levere kundetilfredshed i håb om at bringe mange års nydelse og godt helbred til dig og din familie. APEC Water distribuerer eller sælger ikke vores produkter til nogen tredjepartssælgere på Amazon. Køb venligst ægte APEC Water-produkter fra Amazon eller APEC Water direkte for ægtheden.

Beløb

Tilføj til kurv Køb nu

EAN: 0854961005228

Kategorier Værktøj og boligforbedring, Kitchen & Bath Fixtures, Vandfiltrering og blødgørere, Replacement Water Filters, Udskiftning Bordplade Vandfiltre,

Højtydende udskiftningsfiltre er kompatible med alle standard RO-systemer til bordplader. 2. trins kokosskal kulfilter til at fjerne klor, smag, lugte, uklarhed og farver. 1. trins sedimentfilter til at fjerne støv, partikler og rust. Inkluderer sediment- og kokosnøddeskalkulfilter for at beskytte og forlænge levetiden på din RO. APEC Water ULTIMATE Series FILTER-SET-CTOP er til RO-CTOP og RO-CTOP-PH.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	APEC Water Systems
Certification	‎certified frustration-free
Color	‎White
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 95 ratings 4.7 out of 5 stars
Duration	12
Included Components	‎FILTER-SET-CTOP
Is Discontinued By Manufacturer	‎No
Item model number	‎FILTER-SET-CTOP
Item Package Quantity	‎1
Item Weight	1.5 Pounds
Item Weight	‎1.5 pounds
Manufacturer	‎APEC Water Systems
Material	carbon
Material	‎carbon
Number Of Pieces	‎2
Part Number	‎FILTER-SET-CTOP
Product Benefits	Reduces Chlorine
Product Dimensions	‎10 x 5 x 2.5 inches
Size	‎2 Count

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Kumari

You should really look into a home water system

Back when I owned a house I got water from a shared well and the owner of the well didn't ever run tests on the water quality so I got a reverse osmosis installed in the kitchen for drinking/cooking water. When I moved I bought a version of that system what can be attached to any sink. With everything in the news about water systems I think anyone who can afford it should look into getting this kind of system. The water tastes much better than the filtering that water pitchers do. It's pretty easy to install these filters and they only need to be replaced every 6 or 9 months depending on how many gallons you go through in a month

Scritto da: Amazon Customer

Valuable installation tip

I have owned two APEC countertop systems replacing the filters on several occasions. The quality of the water is very good and changing the filters is pretty simple (instructions included). A few previous buyers wrote reviews recommending running water thru the #1 & #2 (carbon) filters before hooking them up to the final filters, #3 & #4. I tried this today with the replacement filters I just received and believe this is a great idea that probably will increase the efficiency and longevity of the system. It took a few minutes and flushed out a surprising amount of black sediment. After it ran clear I hooked it up and was good to go. Our household water is potable but when it comes to water for drinking, coffee, and ice this system provides a crystal clear product. We fill two 1 gallon containers as needed. It takes about 20 minutes to make a gallon.

Scritto da: AL

I notice my RO system no longer produce waste water and the filtered water drip very slowly

Update 2/22/2018 After several messages back and forth, the company decided to send me a membrane filter to replace my existing one ruin by the carbon from Stage 2 filter. I think this deserve upgrade from 2 stars to 4 stars because they are taking care of customer's problem caused by the new filters installed. I didn't give 5 star because they should have put warning label on the stage 2 filter. It seems that new filter will always eject some carbon initially. So before connecting stage 2 carbon filter to stage 3 membrane filter, water need to turn on to eject out free flowing carbon until water turn clear. Once water is clear, it is safe to connect stage 2 filter to stage 3 filter. If I was warn about it, I would not have the problem. Original review 2/21/2018 I purchase this set of filters to replace the stage 1 & 2 on my RO system. My system is currently about 2 year old and function perfectly. Prior to the filter change, I test it with TDS tester and the filtered water show 14ppm with the tap water showing 285ppm. Based on the test result, I don't really need to change the filter. However, I figure change stage 1 & 2 filter may help stage 3 &4 last longer. so I went ahead with the stage 1 & 2 filter change. After replace stage 1 & 2 filter, I notice my RO system no longer produce waste water and the filtered water drip very slowly. When I tested the filtered water, it show quality of 80-140 ppm. Prior to the filter change was only 14ppm. this mean my water is 5 to 10 time worse than before the filter change. I message the Apec about the situation and I was asked to test the water flow on filter stage 1 & 2. I pull the tube connect stage 2 to stage 3 and turn on the water to see if water pressure is good and it show strong flow. I also notice that water came out of stage 2 was gray for about 2 seconds then it turn clear. I got curious and decide to open up stage 3 housing to see why it is not producing clean water. The moment I open up the housing, I notice the interior surface was complete cover in a layer of carbon throughout. The stage 3 membrane was basically clog with carbon from stage 2. That explains why it no longer produce waste water and product clean water at such slow and dirty matter. Based on the condition, I believer I received a defective stage 2 and it ruin my stage 3 membrane filter. I message APEC about the situation and I was told my system is old and need filter change. If I didn't test the water quality before I replace the stage 1 and 2, I might actually think that is the case. But number doesn't lie and seeing it with my own eye, I don't believe that is the case and they should own up to it. Defect happen from time to time, but how you handle it with customer when it happen is more important. The way then handle it leave me to say -----Buy at your own risk

Scritto da: Alex

Super Easy to install

Before I purchase these replacement filters. My waste water drain is not a flow smoothly anymore, and the filtered water flows slower that when I first purchased it. The installation process is super easy, I was able to complete it within 10 min, then you need to let it run for 15 mins. Afterward, the improvement is very noticeable, the waste water now flow very smoothly, and the filtered water come out much faster. You definitely need to replace your filter every 6 month. Go my fellow hydrohomies!

Scritto da: YV

Perfect replacement for the countertop versions

Maybe the price is a bit higher. Overall good.

Scritto da: Frank

Great filters, but terrible instructions

What you are not told is how to make sure you rinse the new filters before installing. If you do not, you will push all the charcoal dust into the system, making the filter less efficient, and greatly slowing the flow of water through the system. When you get the new charcoal filter, disconnect the line in from the first line of defense, the sediment filter. Look at the new filter, and find the arrow that shows direction of water. Connect the line in from the faucet to the inlet side of the new charcoal filter. Point the outlet for that filter into the sink, and run the water for at least one minute. You will see why as soon as you turn on the water, as what comes out will be black. Run until the water is clear, probably at least one gallon. Then connect everything and you are ready to go.

Scritto da: W. Patch

Carbon Dust

As noted by other buyers, the initial carbon block filter (CT-24CAB) used to reduce the chlorine in the incoming wash to the membrane does have some loose carbon dust/fines, same as the output filter and contrary to what the installation instructions state. Once installed, the dust can be easily flushed out by detaching the block filter output line from the input fastener on the membrane sump/cylinder and running water through the first two filters until the rinse is clear. Although there is not much dust present, I believe flushing the block filter prolongs the life of the membrane. Mine has been installed for two years and still yields a reading of 10 ppm versus 440 ppm from the tap - certainly a quality result.

Scritto da: BoatguySWCC

Easy installation

This product easily installs. Instructions are easy to follow and all parts provided to include the clean water hose.