Yost skruestik COV-3 skruestik

Brand:Yost Vises

3.5/5

kr
604.71

GARANTI: Leveres med 1 års begrænset garanti og 90 dages returret. SIKKERHEDSINFORMATION: Misbrug af skruestik kan forårsage alvorlig skade på øjne, hænder og eller andre kropsdele. Skruestik skal sættes op og bruges korrekt. Før opsætning og brug skal du læse, forstå og følge alle instruktionerne i manualen. YOST VISES KVALITET: Hvert Yost Vises værktøj er konstrueret til at have høje standarder for kvalitet, styrke og holdbarhed. Vi værdsætter kvalitet frem for kvantitet og fremstiller produkter, der er sikre og nemme at bruge. Vi tilbyder livslang teknisk support for at støtte vores kvalitetsgaranti. SÅDAN BRUGER DU: Sørg for, at skruestik er sikkert monteret på arbejdsbordet, og at drejebaselåsen er sikkert. Åbn skruestik ved at dreje skruestikhåndtaget mod uret. Placer emnet mellem de takkede kæber. Luk skruestikket ved at dreje skruestikhåndtaget med uret, indtil emnet sidder tæt i de takkede kæber, fortsæt med at stramme, indtil du ikke længere kan flytte emnet. Spænd ikke for meget, da dette kan beskadige emnet og skruestik. Når du er færdig med at arbejde på emnet, drej skruehåndtaget mod uret for at frigøre emnet. TEKNISKE SPECIFIKATIONER: Kæbebredde 3 (7,62 cm), Kæbeåbning 2,5 (6,35 cm), Halsdybde 1,625 (4,1275 cm). BÆRBAR STYKKE: Yost Vises COV-3 3-tommer Clamp-On skruestik er lavet af 30.000 PSI grå jernstøbegods. Den har en belagt stålskrue og håndtag og dobbelte styrestænger i stål. I stand til at klemme op til 3/8 tomme rør.

GARANTI: Leveres med 1 års begrænset garanti og 90 dages returret. SIKKERHEDSINFORMATION: Misbrug af skruestik kan forårsage alvorlig skade på øjne, hænder og eller andre kropsdele. Skruestik skal sættes op og bruges korrekt. Før opsætning og brug skal du læse, forstå og følge alle instruktionerne i manualen. YOST VISES KVALITET: Hvert Yost Vises værktøj er konstrueret til at have høje standarder for kvalitet, styrke og holdbarhed. Vi værdsætter kvalitet frem for kvantitet og fremstiller produkter, der er sikre og nemme at bruge. Vi tilbyder livslang teknisk support for at støtte vores kvalitetsgaranti. SÅDAN BRUGER DU: Sørg for, at skruestik er sikkert monteret på arbejdsbordet, og at drejebaselåsen er sikkert. Åbn skruestik ved at dreje skruestikhåndtaget mod uret. Placer emnet mellem de takkede kæber. Luk skruestikket ved at dreje skruestikhåndtaget med uret, indtil emnet sidder tæt i de takkede kæber, fortsæt med at stramme, indtil du ikke længere kan flytte emnet. Spænd ikke for meget, da dette kan beskadige emnet og skruestik. Når du er færdig med at arbejde på emnet, drej skruehåndtaget mod uret for at frigøre emnet. TEKNISKE SPECIFIKATIONER: Kæbebredde 3 (7,62 cm), Kæbeåbning 2,5 (6,35 cm), Halsdybde 1,625 (4,1275 cm). BÆRBAR STYKKE: Yost Vises COV-3 3-tommer Clamp-On skruestik er lavet af 30.000 PSI grå jernstøbegods. Den har en belagt stålskrue og håndtag og dobbelte styrestænger i stål. I stand til at klemme op til 3/8 tomme rør.
Brand Yost Vises
Color Original Version
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number COV-3
Manufacturer Yost Tools
Material Iron
Product Dimensions 9 x 6 x 3 inches; 4.32 Pounds
Style Portable,Triangular

3.5

13 Review
5 Star
67
4 Star
21
3 Star
7
2 Star
2
1 Star
3

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: chuck sanders
using to re-grip golf clubs. Works great for that.
using this to re-grip golf clubs, this vice works great for this job if you use re-griping rubber inserts.fast and easy .
Scritto da: GWB
Lightweight Vise
Not bad for what it is, but it is pretty small and lightweight.
Scritto da: robert new
Ease of use
Great quality, vary easy to use.
Scritto da: Charlie Griffin
Surprisingly sturdy
This vice has held up very well. I thought it would be a little bigger in person but as long as you keep your expectations realistic it works great.
Scritto da: Robbie
Only for lightweight use
Nothing wrong with the quality, but be warned this is for very lightweight tasks. If you need to torque anything the vise will move on you. Not meant for anything that will hang over the edges. If you try to use anything that will hang over the edges, the vice doesn’t have enough strength to stabilize these items.
Scritto da: Lindsay B.
Very small vise
This is a small vise! Buy a bigger one if you can. Needed this size to mount to the side of a tool box. No groove for pipes which is a downside. Only good for very light duty projects. Clamp makes it easy to move around and store when not in use.
Scritto da: WTK
Much better and handier than I suspected.
I needed a small yet tough mobile clamping vice. This fits the bill well. It’s not delicate at all and it’s certainly for a great price will be on a “modeling vice” or clamps. Happy.
Scritto da: Dan Newcome
... enough mass to it that it would not vibrate like crazy or flex when I did some medium-duty cutting ...
I wanted a little clamp vise that had enough mass to it that it would not vibrate like crazy or flex when I did some medium-duty cutting and drilling. This mostly fits the bill but there are some kind of annoying things about it. The biggest thing is that the jaws are beveled a bit so that the top edge of the jaws meet but there is a gap that widens down through the rest of the jaw. This means that the clamping force is all at the very top of the jaws. It's hard to get a solid grip on larger pieces of material and they tend to slip sideways when working. It would have been nice if this had removable jaws. The little anvil on the back is a nice touch but it's very small. It seems like they could have faced it off a bit larger. Other than that it's got just enough mass to it that it doesn't vibrate or flex and it's not so heavy you can't put it in a normal drawer when not in use. I just wish it held a little tighter.
Scritto da: Misha Knight
MADE IN CHINA
Bought this specific vise after reading good reviews about it and I make purchasing decisions made on where things are made. I opted for the "Taiwan Made" Yost COV-3 Model over the American one because of the extra 0.5" of Jaw Width. I do my absolute best not to buy goods made in China. Deceptive marketing by the seller has duped me. I would be sending this back if not for my need to finish a time sensitive project. Next time I will be paying the extra and buying 100% American when offered the option. 1/5 Stars based on this alone, Would give 0/5 If possible. Thanks Amazon, I will be buying less things from you now.
Scritto da: Johnny J
Flaw in the design
The vise itself is a sturdy little unit although as noted in other reviews the jaws are smooth and not textured like they are in the picture. The problem that I found, and I would say that this applies to the Irwin vise and others of this design, is that the two support bars and the threaded bar are all in line down the centre of the vise. What I found is that this made it impossible to hold anything tightly as the jaws flex as you tighten the vise. This is especially important if you are trying to hold something small or trying to hold something in the side of the vise for cutting or filing. In conclusion, it isn't a terrible vise, but for fine work I would consider other options.
Scritto da: Constantine Vorobyov
2.5
No inserts from steel, cast iron is brittle, i they are getting damaged quickly. Large gap on stop screw, - wrong size screw. This is definitely not 5 stars, reviews are clueless as always. For ~40 it's poor quality.
Scritto da: Don Hall
Ideal for light repair work.
A sturdy, practical vise that can be clamped to a work surface, or secured by screws through the front casting.
Scritto da: Binman
Great
Great product for what I need it for

Relaterede produkter

hot
hot
Yost Skruestik 650-C Mekanik Skruestik
3.5/5

kr 3902.86

Yost Skruestik 650-C Mekanik Skruestik
3.5/5

kr 3902.86

hot

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array