Westinghouse Lighting 7787300 Loftsventilator og lysvægstyring, hvid

Name: Westinghouse Lighting 7787300 Loftsventilator og lysvægstyring, hvid
Brand: Westinghouse Lighting
SKU: 0030721778735
Price: 490.61 DKK
Availability: InStock

Brand:Westinghouse Lighting

3.1/5

kr
490.61

PRODUKTBESKRIVELSE Westinghouse loftsventilator og glødelampevægkontrol giver dig mulighed for at nyde bekvemmeligheden ved at justere din loftventilatorhastighed og lysniveau via to simple skydere uden nogensinde at skulle række ud efter en trækkæde. Enheden driver fire blæserhastigheder (høj/medium-høj/medium/lav) og forvandler enhver 3-trins blæser til en 4-trins blæser. Denne enhed erstatter en vippekontakt, så du kan betjene din ventilator fra en praktisk skydekontakt på din væg. Derudover giver fuld-range skydedæmperkontakten på vægpladen dig mulighed for at dæmpe glødelamper. 120-volt/60-hertz-vægstyringen har en tre-leder installation i en standard samledåse. UL/CUL-listet, kan enheden håndtere en blæser på maksimalt 1-1/4 ampere og et lys på maksimalt 300 watt. Der medfølger en vægplade til montering. Produktreferencenummer 77873. AMAZON.COM Nyd bekvemmeligheden ved at justere din loftventilatorhastighed og lysniveau uden nogensinde at skulle række ud efter en trækkæde. Denne Westinghouse Lighting 7787300 trådløse loftsventilator og lysvægkontrol erstatter en vippekontakt og kan bruges med de fleste loftsventilatormærker. Den har en lysdæmper i fuld rækkevidde, driver fire blæserhastigheder (høj/mellem-høj/medium/lav) og kan forvandle enhver 3-trins blæser til en 4-trins blæser. Styr blæserhastighed og lysniveau uden at række ud efter en trækkæde * Betjener fire blæserhastigheder: høj, medium-høj, medium og lav * Gør enhver 3-trins blæser til en 4-trins blæser * Fuld-range glidende lysdæmper giver dig mulighed for at indstil det perfekte lysniveau * Tre-leder installation i standard samledåse; vægplade medfølgerDet slanke design komplementerer enhver indretning. Se større.Kontrol blæserhastighed og lysniveau uden at række ud efter en trækkædeMed Westinghouse Lighting 7787300 vægstyring til loftsventilator, behøver du aldrig mere række ud efter en trækkæde for at justere din blæserhastighed eller lysniveau. Denne enhed erstatter en vippekontakt, så du kan betjene din blæser fra en praktisk skydekontakt på din væg. Du kan også dæmpe dine lys ved at bruge fuld-range-skydedæmperen på vægpladen. Gør enhver tre-speed ventilator til en fire-speed fan. Den betjener fire hastigheder - høj, medium-høj, medium og lav - så du kan få den rigtige mængde luftstrøm og maksimere din komfort. Vægkontrol installeres nemt 120-volt/60-hertz-vægkontrollen har tre-leder installation til brug i en standard samledåse. UL- og CUL-listet, 778300 kan klare en blæser på maksimalt 1-1/4 ampere og en lysarmatur på maksimalt 300 watt. Der medfølger en vægplade til montering. Om Westinghouse Lighting: The World Trusts Brand Westinghouse Lighting er et globalt brand med en enkel filosofi: Gør livet lettere for alle, der køber dets produkter. Virksomheden tilbyder loftsventilatorer, belysningsarmaturer, belysningshardware, belysningstilbehør og pærer til både forbruger- og kommercielle applikationer. Westinghouse Lighting-produkter er designet til enestående kvalitet, pålidelighed og innovation. Hvad er der i BoxCeiling-ventilatoren og lysvægstyringen og vægpladen.

Beløb

Tilføj til kurv Køb nu

EAN: 0030721778735

Kategorier Værktøj og boligforbedring, Belysning & Loftsventilatorer, Ceiling Fans & Accessories, Accessories, Wall Controls,

Vægplade medfølger. Fuld-range glidende lysdæmper til glødepærer giver dig mulighed for at indstille det perfekte lysniveau. Fire blæserhastigheder.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Westinghouse Lighting
Brand	‎Westinghouse Lighting
Color	White
Color	‎White
Controller Type	Pull Chain
Controller Type	‎Pull Chain
Country of Origin	‎China
Current Rating	1.25 Amps
Current Rating	‎1.25 Amps
Customer Reviews	4.1 4.1 out of 5 stars 330 ratings 4.1 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Protection Rating	IP00
International Protection Rating	‎IP00
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	7.6 x 2.8 x 10.2 inches
Item Dimensions LxWxH	‎7.6 x 2.8 x 10.2 inches
Item model number	‎7787300
Item Package Quantity	‎1
Item Weight	‎5.4 ounces
Manufacturer	‎Westinghouse
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Number of Items	‎1
Number Of Pieces	‎1
Operating Voltage	120 Volts
Operating Voltage	‎120 Volts
Operation Mode	Toggle
Operation Mode	‎Toggle
Part Number	‎7787300
Product Dimensions	‎7.6 x 2.8 x 10.2 inches
Switch Style	Toggle, Dimmer Switch
Switch Style	‎Toggle, Dimmer Switch
Unit Count	‎1.0 Count
Voltage	‎120 Volts
Wattage	‎300 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Dale E. Nenadal

I expect FACTORY FRESH AND NEW, This was not.....

I EXPECT FACTORY FRESH. THIS WASN'T, PROBABLY A PRE-RETURNED ITEM THEN SHIPPED BACK OUT TO ME..... Package was opened when I received it. Wire nut bag was outside of box and loose in shipping envelope. Wires had been used, they were not clean cut like from the factory and wires were not as they should be if FACTORY FRESH. More and more often, I buy new but don't get FACTORY FRESH. I should get a discount for t his product..... I have not installed it yet but I hope it works......

Scritto da: Jesus Hernandez Agustín

Easy to replace

Just 5 minutes!

Scritto da: Travis J. Biggar

Very nice with one flaw

Backstory - My wife and I bought a Hampton Bay fan which had 4 speed settings. Because of the electrical configurations of the switches in our house, we wanted to get a switch that controls both the fan and light. Because the fan has 4 speeds, we were under the impression a 4 speed switch like this product was necessary. As I went to hook up the switch, it dawned on me - no matter how many settings the fan has, almost any adjustment switch will work. Basically, the fan is put on high and the switch controls the speeds through a potentiometer or similar regulating device depending on the setting of your choice. Regardless of these circumstances, I finished the install (easy as any other dual switch). Flaw - The physical sliding switch quality is concerning (similar to other product reviews). None have broken yet, although I feel they might snap one day since they are small and made entirely of plastic. To make matters worse, the fan switch requires a significant amount of force to slide it from off to any other setting. We find ourselves taking a few extra seconds to turn on the fan to hopefully avoid breaking it. Update (5 Months) - Both are still working fine with at least 1 actuation per day. We never use the 4th setting on the fan, much too slow. Ordering a 3rd for my office. Update again (almost 3 years) - All is good, nothing broken or worn. My one flaw has been debunked.

Scritto da: Whitney

Exactly like the original

I needed to replace the original control for my fan/light fixture after it stopped working properly and went to find the model that matched the closest (this was it). It works perfectly now. 5 stars!

Scritto da: Motofish

Working good so far

Working well after a couple of days. This switch is kinda nice, it takes one supply wire and outputs to two sources with variable output. So, one hot supply can independently control fan speed and light output. One thing I wasn't expecting is the labels for the fan speeds, (on my switch anyway) 0 = off, 1= high, 2=a little slower, 3 = slower than 2, and 4 = lowest speed. Seemed weird to me. I was expecting 4 to be the highest speed and 1 to be slow, if 0 was off. I didn't wire anything backwards, as the wires coming out of the back of the switch are very clearly labeled. Just a weird operation is all. Other than that the switch seems to work great. If it burns my house down, ill reduce the number of stars... understandably...

Scritto da: Dean Tecklenburg

Westinghouse 7787300 Ceilng Fan and Light Wall Control

just installed this to replace another broken off knob on a hunter fan's slide controller...we have five hunter fans throughout our house and have had to replace hunter fan controllers numerous times because of the knobs breaking off...the fan's themselves have worked flawlessly for almost 7 years now...just a note why i didn't give the westinghouse slide controller 5 stars...the fan speed slide is not as easily moved up to the desired speeds as i would like...have to grasp it with two fingers to slide it up and down...what i really like about the westinghouse fan slide controller is that it starts the fan in the fastest speed right away and can lower the speeds afterwards by continuing up with the slide...before with the hunter fan slide controller one would have to slide to the highest speed setting and then move down to the desired speed...this controller also adds a fourth speed to the hunter fan whose controller only offered three speeds... will update this review should longevity be a problem...

Scritto da: KW Cho

Spark spark! Hope it doesn't catch on fire!

I have this installed this wall switch on 4 of our rooms. They were all installed by certified and insured electrician. When you move the levers for the light switch then it acts as recessive light and it's a smooth slide up and down. But not for the fan control. When you move the fan lever, you hear a click for each speed that you move to. And when you have the fan on and you just want to switch it off, and you just slide it down then you will hear clicks and see electrical sparks inside the switch. This is happening on all 4 switches! So I'm taking extra caution and moving up fan lever one speed at a time so I don't create the electrical sparks. And I wonder... is this is happening to other folks as well? Do I need to get another switch?

Scritto da: Ken

It works, but poorly made

I had to get this to replace my old one which broke. These things work, but the sliders are crap. Imprecise and always feel like they're going to break. I'd pay double if someone made a really good version of this, but I have yet to find one.

Scritto da: Kevin Waites

Disappointed

Dimmer control for light changes the brightness by maybe 10% from full on. Fan speed control to me is backwards. 1 is high speed and 4 is slowest. Seems reversed to what I am used to.

Scritto da: Cass

Works well

Works well with our 3 wire fan. Doesn't fun the led bulbs too much, but that could be the bulbs.

Scritto da: Amazon Customer

Easy to install

The switch was very easy to install. The only thing I notice is the slide switch for the light is the higher you move up the brighter it gets but for the fan is the opposite it starts at the bottom on high and the farther up you go the slower it goes

Scritto da: JS

Didn’t fit

Dosnt fit hookup has to throw out

Scritto da: Snow10

Seems to work opposite

Seems to work opposite, not sure if that was how it was wired. Fast fan speed is actually low.