uxcell K Type 5 cm lang probe termoelementsensor eller temperaturregulator

Brand:uxcell

3.3/5

kr
203.66

Designet med gaffelterminal, fleksibel fjedersektion kan let bøjes til speciel brug. Fungerer godt med temperaturregulator inkluderet her), bredt måleområde på 0-400 grader Celsius. .

Vægt: 31g; Pakkeindhold: 1 x Type K termoelement. Gaffelterminalafstand: 4,1 mm / 0,16; Farve: Sølvfarve. Indvendig isolering: Glasfiber; Ekstern afskærmning: Metalskærm; Samlet længde: 1M / 39. Probediameter: 5mm / 0.2;Sondelængde: 5cm / 2 (ikke inkluderet fleksibel sektion);Gevinddiameter: 7.6mm / 0.3. Produktnavn: Termoelement; Type: K Type; Temperaturområde: 0-400C(32-752F).
Country of Origin China
Is Discontinued By Manufacturer No
Item model number a12031600UX0143
Manufacturer Dragonmarts - BISS
Product Dimensions 39.37 x 0.3 x 0.3 inches; 0.01 Ounces

3.3

8 Review
5 Star
63
4 Star
19
3 Star
7
2 Star
6
1 Star
3

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Rob
Works, but low quality
This thermocouple probe seems to work ok in my application, but I had to isolate it from the metal chassis of my oven in order to get a decent reading. Even still, the probe is nowhere near as good as those from more reputable sources (Omega, Cole-Parmer, etc). The insulation colors are not the standard for type K thermocouples (yellow + and red -), but trial and error revealed the correct configuration (blue + and red -). In the future, I would order a more expensive but higher quality probe from Omega or similar suppliers.
Scritto da: Amazon Customer
Gives good readings via the thermometer module I have it connected ...
Mounted into the main cook chamber of my keg-a-Que (smoker/BBQ combo made from commercial beer kegs). Gives good readings via the thermometer module I have it connected to (battery powered).
Scritto da: Scucc07
Good quality
Used in a powder coating oven with a temp controller and works great and is very accurate. Have had it in use now for over a year with moderate use and has yet to have a problem
Scritto da: Amazon Customer
Nice probe, double check your probe specs.
Nice probe, but did not work with my InkBird control unit, which is my fault. Double check your temperature probe requirements.
Scritto da: Bestrya
Worked great with a MAX31855 in an Arduino project
Worked great with a MAX31855 in an Arduino project. Unfortunately, I could not use this probe for my project as this probe is "grounded", giving erratic temperature readings when the probe touched metal. This is not the fault of the product, but my own for not realizing what type of probe I needed. This product seems to be high quality and would last a long time.
Scritto da: Skuyler Farha
I ended up changes the connections to have probes connect ...
I ended up changes the connections to have probes connect to my multimeter. They ohm out at 9 ohms which my fluke stock test probe ohms at 3 ohms. Gets to the same temp as stock only slower.
Scritto da: doug starkey
Four Stars
works as advertised i will be ordering more of these as needed.
Scritto da: Tyson and Lindsey
Four Stars
Easy to use when hooked up to a MAX31855 IC

Relaterede produkter

hot
Southwire CLAMP, TEMP TYPE K 60020S
3.3/5

kr 608.84

Southwire CLAMP, TEMP TYPE K 60020S
3.3/5

kr 608.84

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array