Rain Bird ET/1PK25S Drypvandingssender Installations- og fjernelsesværktøj Combo Fitting/Emitter-værktøj - Installer/fjern

Brand:Rain Bird

3.4/5

kr
191.43

PRODUKTBESKRIVELSE Rain Bird ET/1PK25S Installations- og fjernelsesværktøj til drypvandingssender. Praktisk multifunktionsværktøj punkterer 1/2" drypslanger og installerer Rain Bird drypper/emittere eller 1/4" fittings i én hurtig handling. Installerer eller fjerner hurtigt Rain Bird-spotvandingsemittere, 1/4" modhager og 1/4" rørslange propper. Du skal blot placere en emitter eller fitting i en specialåbning i enden af værktøjet; tryk modhager ind i sidevæggen af 1/2 slange. Træk værktøjet væk, og efterlad emitter eller fitting indlejret i slangen. Du er nu klar til at skubbe 1/4 slange på din installerede emitter eller fitting. **Installationstip: for den nemmeste gennemtrængning af 1/2 drypslange skal du bruge en let vridende bevægelse, når du indsætter modhager 1/4 emittere eller fittings. Denne teknik reducerer den nedadgående kraft, der er nødvendig, og forhindrer udfladning af rør, hvilket kan forårsage penetrering gennem den modsatte side. Brug indhakket i siden af værktøjet for at fjerne emittere eller fittings. Brug det større hul, der er placeret i håndtagsenden af emitterværktøjet, for at indsætte dumperpropper for at tætne huller i 1/2 drypslange. Rain Bird goof plugs har små kamme til at holde dem fast i værktøjet; disse kanter bliver lidt flade, når stikket sættes i, hvilket gør det nemt at sættes ind i slangen. Meget synlig lilla farve gør det nemt at se værktøjet i græs, jord, bark, bark osv. Rain Bird "The Intelligent Use of Water". FRA PRODUCENTEN Rain Bird Corporation er en privatejet virksomhed grundlagt i 1933 under landbrugsboomet i Californien. Vi er anerkendt som den #1 producent og leverandør af kunstvandingsprodukter og -tjenester i verden. Med salgskontorer over hele kloden; vi tilbyder over 4.000 vandbesparende kunstvandingsprodukter i mere end 130 lande. Siden starten har Rain Bird produceret og tilbudt branchens bredeste udvalg af højkvalitets kunstvandingsprodukter til: gårde, golfbaner, sportsarenaer, kommercielle bebyggelser og boliger. I løbet af de sidste 80 år har Rain Bird modtaget mere end 450 patenter verden over. Inklusiv den første til kunstvanding i 1935 på vores originale slagdrevne sprinkler (US Patent #1.997.901), som revolutionerede landbrugets fødevareproduktion og indledte en ny æra inden for kunstvanding på verdensplan. I 1990 blev denne originale slagsprinkler udpeget som et historisk vartegn af American Society of Agricultural Engineers. Vores produkter dækker alle aspekter af kunstvanding ... timere/controllere, pop-up roterende sprinklere, pop-up sprøjtehoved sprinklere, sprinklerdyser, kunstvandingsventiler, drypvanding, dræning og meget mere. Disse produkter er blevet udvalgt og installeret på verdensplan i de største og mest prestigefyldte projekter til bolig-, erhvervs-, landbrugs- og golfbanevanding. Rain Bird er forpligtet til at The Intelligent Use of Water™ strækker sig ud over produkter til uddannelse, træning og tjenester til industrien og samfundet. Vores arv er kun at designe og fremstille produkter af højeste værdi og kvalitet. Vi er taknemmelige for at have modtaget adskillige anerkendelsespriser fra mange af vores værdsatte partnere. Rain Bird "Den intelligente brug af vand

Beløb

Tilføj til kurv Køb nu

EAN: 077985002367

Kategorier Patio, Plæne & Have, Gartneri & Plænepleje, Watering Equipment, Automatisk vandingsudstyr, Sprinklerhoveder,

Meget synlig lilla farve gør det nemt at se værktøjet i græs, jord og bark/bark. Hul i toppen af håndtaget installerer dunpropper for at tætne huller i 1/2 slange. Indhak i siden giver mulighed for nem fjernelse af fittings, emittere og fjoller. For nemmere at installere emittere og 1/4-fittings i 1/2-rør, skal du bruge en let vridning, når du indsætter. Giver nem et-trins-påføring af Rain Bird-drypper/emittere, 1/4-fittings og slange-goof-propper. Installerer og fjerner hurtigt Rain Bird-drypper/-udsendere, 1/4 modhagerbeslag og slangepropper.

Country of Origin	Mexico
Customer Reviews	4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	ET/1PK25S2
Item Weight	0.009 ounces
Manufacturer	Rain Bird
Product Dimensions	1 x 0.63 x 1.58 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Sandra

made my job easier

it made my job easier

Scritto da: Angel Douglas

Very small so dont lose it, worked good for what It was needed for

I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.

Scritto da: JS

Slow shipping.

Works great

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Flamsteed

I needed his

I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.

Scritto da: JNK

Blade works great, hole punch not so much

The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.

Scritto da: Saeng Fio Chao

Great handy tool

With all others tool, I find this is the best one

Scritto da: Ed

Don't forget the tool!

I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.

Scritto da: Annette Dreger

Very easy to use

Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!

Scritto da: Amazon Customer

retour imposible

J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item

Scritto da: DP Kindle Customer

It works!!

Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!

Scritto da: rferraro

Product description is misleading

I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....