Protoco 3010 Standard 15-delt nøglestativ, værktøjsorganisator til værktøjskasse, værktøjsvogn eller vægmonteret, sort 15-stykke sort

Brand:Protoco

3.5/5

kr
297.10

Opdater din værktøjskasse eller værktøjsvogn, og hold dine værktøjer organiseret med Protoco's Wrench Rack (The Original!), tilgængelig i 12 eller 15 dele, standard eller omvendt. Vægopsætning er også en mulighed for at holde dine skruenøgler pænt organiseret. Længe forbi er de dage, hvor man ledte efter en skruenøgle i en bestemt størrelse i bunden af ​​din værktøjskasse, eller at gå gennem skuffe efter skuffe med ophobet affald. Med Protoco Wrench Rack er dine værktøjer altid inden for din synslinje, hvilket gør det nemt at finde den rigtige skruenøgle til jobbet, uanset hvad jobbet måtte være. Vores nøglestativ, der fås i en række forskellige farver, tilpasser sig nemt til atmosfæren på din arbejdsplads og bliver problemfrit en del af den.

Om Protoco: Protoco fremstiller beskyttelsescover, sprøjtestøbte plastikprodukter, fluidiserede pulvercoatede produkter, belægninger, marineprodukter og tilpasset emballage, alt sammen stolt fremstillet i USA siden 1977. Alsidigt: Passer til både SAE og metriske skruenøgler og holder skruenøgler fra 1 /4 til 1 og 6 mm til 24 mm; Perfekt til dit nuværende skruenøglesæt og til også at sætte en ny op! Den er også designet til at passe alle dine skruenøgler i en 1” højde skuffe i din værktøjskasse eller vogn. Meget holdbar: Fremstillet af plastmateriale med høj densitet, som giver holdbarhed, slagfasthed og lang levetid; En værktøjsorganisator, der vil være en del af dit setup i mange år fremover, understøttet af Protoco-kvalitet og Made in the USA!. Let at montere: Dette nøglestativ kan også nemt installeres, og ved at hænge dit værktøj på væggen holdes det inden for din synslinje, så du med et øjeblik kan identificere den korrekte skruenøgle til jobbet; Spar den tid, der ville være spildt på jagt efter det rigtige værktøj, og få dine projekter udført hurtigere!. Overlegen organisation: Hold din værktøjskasse organiseret og stop med at spilde tid på at søge efter den skruenøgle, du har brug for; Vores 12 eller 15 dele nøgleholder holder dem alle organiseret og tydeligt i syne i stedet for at flyde rundt i en skuffe, klar til at blive brugt, når du har brug for dem.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Protoco
Brand ‎Protoco
Color Black
Color ‎Black
Customer Reviews 4.6 4.6 out of 5 stars 123 ratings 4.6 out of 5 stars
Finish ‎Powder Coated
Finish Type ‎Powder Coated
Head Style ‎Box End
Included Components ‎Wrench Rack
Item Dimensions LxWxH 11.75 x 7.13 x 1.13 inches
Item Dimensions LxWxH ‎11.75 x 7.13 x 1.13 inches
Item model number ‎3010
Item Package Quantity 1
Item Package Quantity ‎1
Item Weight ‎0.353 ounces
Manufacturer ‎Protoco
Material Plastic
Material ‎Plastic
Operation Mode ‎Mechanical
Part Number ‎3010
Product Dimensions ‎11.75 x 7.13 x 1.13 inches
Size ‎15-Piece

3.5

13 Review
5 Star
76
4 Star
13
3 Star
2
2 Star
7
1 Star
2

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Shopping Guy
Best rack if you don't need to captivate your wrenches to carry them around
This wrench rack is perfect for organizing your tools in your tool box drawer when you don't need to carry all your wrenches around. This rack is the easiest to get wrenches in and out and they sit nicely in the grooves nestled into the two foam strips on the inside of each rail that keeps them in place unless you slam the drawer pretty hard. Compared to the type of rack that captivate the wrenches this also takes up a little less height and area in your drawer. If you want a rack that captivates to tools you can check out a couple of the other reviews I submitted, but for drawer organization and pure good looks - if you typically do your work near your box these are the best.
Scritto da: ED
Good rack, nice quality
These fit my snap-on wrenches well. Sizes 10-24mm. Im not sure how well they would work with the craftsman wrenches that most guys have for home since those are a little bulkier. These hold up well for everyday use in the shop though. I tend to like the gripper style better myself. The wrenches wiggle around in these some. Not a big deal I just like how the gripper style racks hold them tight and allow you to grab the entire rack and carry it around if needed. The quality of these are very good though. And a lot cheaper on amazon than off the matco truck. I give 4.5 stars.
Scritto da: Warren and Christine
Standard
Pretty much the standard in wrench racks. My others I've had for forever now. The foam on this initially had the wrenches sitting high up in the grooves but over time they settle in. I just wish they still had the clip that went over the rack that held them in place in case you needed to take them somewhere. I'm not a fan of the clip in style racks because I don't want to fumble getting a wrench. Time is money and I don't need frustration.
Scritto da: RB211
Perfect For Drawer Use
Perfect if you keep your wrenches in a tool box drawer. The addition of the raised, foam down each side is a nice feature, however I'm sure it will compress over time and not be as effective at keeping each wrench placed.
Scritto da: Wesley Schaefer
Cheap 3d printed
They hold wrenches. But don't breathe on them wrong or else they fall out of their slot. So it if they or in a tool box drawer like mine they will all fall out all over every time you open or close your drawer. Make your own or buy better ones.
Scritto da: JerseyBoy0034
Yes please
These are the best for containing large four way angle wrenches up to 1 1/4” and still having them fit in a drawer. Also work great for double box end offset wrenches.
Scritto da: Chris A.
... this is the only one that is worth a crap. I wish they made version with one straight ...
I've tried several wrench organizers and this is the only one that is worth a crap. I wish they made version with one straight side for a slightly more efficient use of drawer space.
Scritto da: Gary Barrentine
Does a good job.
Fits in tool cart drawer. Keeps ratcheting wrench in place and organized. Does not slip when drawer is closed.
Scritto da: Tim
excellent
Solid low profile wrench rack will let you put a complete set of 15 wrenches into a low profile drawer. These have thick teeth and solid construction so they hold up well. The 15 wrench versions can be hard to find sometimes, so very happy to be able to buy them again. Use along with the reverse style to load up your drawer with little wasted space.
Scritto da: Mark T
The best wrench racks!
Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.
Scritto da: Mark T
Best wrench racks!!
Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.
Scritto da: Amazon Customer
Not sure why one picture says magnetic, because it is not.
Looks good, better suited for in a toolbox than hanging on the wall. Not sure why one picture states it is magnetic because it definitely is not. I bought this under the impression that it was magnetic.
Scritto da: Uncle Evil
Original Wrench Racks for a good price. Wish I could buy the reverse version ...
Original Wrench Racks for a good price . Wish I could buy the reverse version as well for the same price .

Relaterede produkter

hot
Proto 577-5299 Boxes Værktøjssæt
3.7/5

kr 475.93

Proto 577-5299 Boxes Værktøjssæt
3.7/5

kr 475.93

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array