POWERTEC 70219 PVC støvopsamlingsslange (3 tommer x 10 fod)

Name: POWERTEC 70219 PVC støvopsamlingsslange (3 tommer x 10 fod)
Brand: POWERTEC
SKU: 0709619857325
Price: 582.54 DKK
Availability: InStock

Brand:POWERTEC

3.6/5

kr
582.54

Den 3-tommer x 10-fods PVC-støvsamlerslange - POWERTEC 70219 En praktisk, sikker og omkostningseffektiv støvopsamlingsslange designet til at forbedre dit eksisterende værkstedstøvopsamlings- og filtreringssystemer. Fleksibel alsidighed Uanset om du har en industristøvsuger eller et centraliseret støvopsamlingssystem indbygget i din butik, forstår du vigtigheden af at have en superlet, fleksibel og knæksikker støvopsamlingsslange, der kan modstå belastningen ved daglig butiksbrug. Heavy Duty Denne slange er lavet af højkvalitets PVC-materiale og vil ikke kollapse under tryk fra din støvopsamler. PVCs holdbarhed, styrke og lette installation gør den ideel til værkstedstøvkontrol, savsmuldsopsamling, tømrer- og træbearbejdning. Innovative designfunktioner Fremviser en imponerende gennemskinnelig krop, forstærket af indvendig spiralfjederstål, der giver dig mulighed for at overvåge din luftbevægelsesydelse, opsamling af affald og adskillelse/filtrering af fint støv. Vurderet sikker Ved støvopsamling skal man altid overveje farerne ved statisk elektricitet og brandrisiko. Denne PVC-slange har en flammehæmmende konstruktion, er temperaturbestandig (op til 176°F) og er i stand til elektrostatisk afladning (når den er jordet). Det giver også enestående modstandsdygtighed over for kemikalier sammen med sure og alkaliske materialer. Produktspecifikationsdata Konstruktion: Kraftig blød PVC (polyvinylklorid) forstærket spiralfjederståltråd: fjederståltråd Størrelse: 3 tommer diameter x 10 fod lang Vægtykkelse: 0, 5 mm / 1/64 Kompressionsforhold: 3: 1 Temperaturområde : -50° F til 158° F (kortvarig op til 176° F)

Ingen tilgængelige enheder

EAN: 0709619857325

Kategorier Værktøj og boligforbedring, Værktøj & Håndværktøj, Elektroværktøjsdele og tilbehør, Tilbehør til støvsugere & støvopsamlere, Slanger,

Ideel til et sortiment af savsmuldsopsamlere, klimaanlæg indendørs ventilationskanaler og 3" PVC støvopsamlingssystemer til træbearbejdning. Perfekt til ethvert støvopsamlingssystem med frit udsyn – så du kan overvåge støv/affaldsadskillelse og damp/røgfiltrering. Ultra fleksibel slange forstærket med fjederståltråd giver sejhed og manøvredygtighed. Fremstillet af højkvalitets PVC for holdbarhed, styrke og nem installation. Inkluderer (én) 3 diameter 10 fod lang venstre spiral klar fleksibel slange.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	POWERTEC
Color	Clear
Color	‎Clear
Customer Reviews	4.6 4.6 out of 5 stars 294 ratings 4.6 out of 5 stars
Included Components	‎PVC Flexible Dust Collection Hose
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	36 x 4 x 4 inches
Item model number	‎70219
Item Package Quantity	‎1
Item Weight	3.28 Pounds
Item Weight	‎3.28 pounds
Manufacturer	‎POWERTEC
Material	PVC
Material	‎PVC
Measurement System	‎English/Standard
Nominal Wall Thickness	5 month
Part Number	‎70219
Product Dimensions	‎36 x 4 x 4 inches
Size	‎3 Inch
Style	‎10Ft

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Curt Spender

Heavy duty

Is heavy duty and better than expected. Easy to use and works great on my shop vacuum system.

Scritto da: Kelly S. Parker

excellent vent line for a bathroom fan

The dummies who installed my office bathroom fan used a 4" flexible foil tube to vent it to the roof. They tried to use foil tape to bridge the gap to the 3" output of the fan. 9 years later, I got up in the suspended ceiling and noticed that most of air was just blowing around that dead space. It is much easier for air to blow through that gap than to go the extra ten feet to make it to the roof. This fits perfectly on the plastic 3" fan output and also on the 3 to 4" adapter. The stiffness of the tube makes it bend perfectly towards the roof vent. I want to find more uses for this excellent tube!

Scritto da: Sabayon Linux User

Nice stuff

Warning, I drilled my opening with a 3 inch hole saw, and this hose would not go through the hole. I needed a 3 1/8" hole for a squeeze fit, or a 3 1/4" hole for a slide fit. I am using it with an inline 12Vdc bilge vent fan. It went on the fan intake and exhaust flanges so tightly, I did not need any clamps (but it did go on). Not cheap, but looks like it should last. Not sure it is fuel proof, so I would not splash fuel on it.

Scritto da: Anne H.

Works!

I am using this in my woodturning shop. I previously used black tubing with the vacuum system. This is much easier to see any clogs - and in fact seems to clog less often - and provides great suction. Would definitely purchase again.

Scritto da: OopsIDidItAgain

Worked perfect

I have an old grinder that works great but was in desperate need of a new hose. This was way too long but the perfect width and I wanted clear. I simply cut it to size and saved the rest, for what I don’t know. Works great!

Scritto da: Mr fix

Powermatic pm2000 dust collector replacement

I replaced the dust collection hose inside my Powermatic pm2000 table saw. The one that came with the saw was two stiff so when I would tilt the blade it would pull it loose and get saw dust inside the cabinet. This one works great! The coils are backwards from the original so it wouldn’t thread on like the original, but not a problem as it pulls right over the threads and stays put.

Scritto da: nj.firefighter

I liked the quality. Durable for my bath vent!

Just the perfect vent I needed for a bathroom remodel. Strong, durable walls that are nice and thick. I used a short piece to flex about the exterior good to bath fan damper. I measured it perfect for a consistent stretch, no wrinkles. Had the fart fun run for a test. Great air flow through a few feet. This vs metal flex that will corrode. This will need to be in a wall until the earth splits open. Just what I wanted for hopefully a very long service life.

Scritto da: HH Steve

Flexible 3" air hose for Powermatic saw

Like another reviewer here, I was looking for a replacement hose for a Powermatic PM2000 table saw. This is it! The answer to the problem of the factory hose being waaaay too stiff, falling off every time the blade is tilted. Perfect solution....highly recommended if you need flexible material.