POWERTEC 70189 Støvsamler Y-fitting

Brand:POWERTEC

3.6/5

kr
370.50

Vi præsenterer Dust Collection Y-fitting fra POWERTEC. Denne ægte "Y" type fitting fungerer som en støvopsamlingssplitter og er specielt designet til at hjælpe dig med at reducere ned fra en 6" port (eller hovedledning) ned til 4 tommer. Modsat 6-tommers ende har denne tilspidsede splitter dobbelte 4" slangeledninger - leverer et multifunktionelt værktøj, der øger arbejdsflowet, samtidig med at den effektivt rummer flere slangetilførsler. Uanset om du bruger dette stik med dine vakuumsystemer eller bærbare værkstedsmaskiner, er det designet til at forbedre dit systems luftstrøm og effektivitet. Den er også bygget til at give en sikker og pålidelig forbindelse til dine porte. Førsteklasses kvalitet Vores 6x4x4 Y-fitting er lavet af sort ABS-plast af høj kvalitet. Dette materiale er lavet til tunge opgaver og tilbyder holdbarhed med ikke-toksiske egenskaber. Den miljøvenlige konstruktion gør den til ide til indendørs og udendørs projekter og bruges ofte af hobbyfolk og professionelle træarbejdere rundt om i verden. POWERTEC er en førende producent af højkvalitets træbearbejdningsværktøj og tilbehør, maskiner og et sortiment af OEM-reservedele. Vi er forpligtet til at overgå forventningerne og samtidig bringe de nyeste innovationer, teknologi og produktudvikling til industrien.

SPECS: 6-tommers nominelle ende måler 6-23/64-tommer O. D. og 6-tommer I. D. Begge 4-tommers nominelle ender måler 3-61/64-tommer ydre diameter. og 3-23/32-tommer indre diameter – Sørg for at tjekke din delegrænseflade for størrelseskompatibilitet. Bemærk venligst, at dette ikke er designet til at fungere med skema 40 eller andre skemaer af PVC-rør. PRO BYGNING: Fremstillet af højkvalitets ABS-plastmateriale designet til styrke og holdbarhed - i stand til at modstå støv, snavs og andre slibemidler, der ofte forårsager slid. FUNKTIONER: 6" åbningen er en hunport og fungerer med 6" OD-rør eller andre hanporte. Dobbelte 4" OD-porte til at rumme støvopsamlerslangeledninger, rør og værktøjer som bordsave, fugemaskiner, høvlemaskiner og slibemaskiner. FUNKTION: Dette stik med tre huller giver dig mulighed for at reducere ned fra en 6" port (eller hovedledning) til 4" grene. Kan bruges som erstatningsbeslag til støvopsamlere, såsom POWERTEC DC1512 eller lignende størrelse enheder. INKLUDERER: (1) Y-Type Støvopsamlingssystem Fitting.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Color Black
Color ‎Black
Connector Type Reducer
Connector Type ‎Reducer
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 239 ratings 4.5 out of 5 stars
Exterior Finish ABS
Exterior Finish ‎ABS
Included Components ‎Fitting
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 7 x 6.2 x 10 inches
Item Dimensions LxWxH ‎7 x 6.2 x 10 inches
Item model number ‎70189
Item Package Quantity ‎1
Item Weight ‎13.6 ounces
Manufacturer ‎POWERTEC
Material Acrylonitrile Butadiene Styrene
Material ‎Acrylonitrile Butadiene Styrene
Measurement System ‎Inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎70189
Product Dimensions ‎7 x 6.2 x 10 inches
Size 6 x 4 x 4"
Size ‎6 x 4 x 4"
Style ‎6" to 4" fitting

3.6

9 Review
5 Star
75
4 Star
13
3 Star
7
2 Star
3
1 Star
2

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Anna
Useful product, but a bit too narrow
This splitter was perfect for my niche need to connect 3 fan outlets into 1 roof vent. At first I used box store fittings which was clunky and expensive. I threw my contraption out and used this splitter instead. But I fitted one ending to a 4" ABS pipe from the box store. The fit wasn't great - I had to use several thick layers of cement to enlarge this splitter. Other people mention that it splits down the middle to two halves. I can see how this can happen, the two halves are melted together. So I reinforced it with ABS cement.
Scritto da: Julien
Perfect solid hardware that is holding up well
Perfect solid hardware that is holding up well
Scritto da: TrailTrackers
This does work... With some work
You need "volume" to make this fitting function correctly. Notice my system goes from 8" to 6" to this fitting. Also note that I have this fitting inserted into a 6" Tee; roughly 1 1/2" penetration. Now then, to make this fitting work... I used my 5" random orbital sander with 60 grit paper and EVENLY sanded around the outside of the 6" end until it would go into the Tee. When I reached 1 1/2" penetration I switched to 120 grit to finish it off. I could have glued this into place, but I chose to use duct tape instead because at some point I'll be moving into a larger shop. edit: I should mention 2 more things. The time it took to sand this fitting to size was only 15 mins; nothing to speak of imho. Also, I liked the way this turned out so much I ordered another one, which I just got today. I will have that one installed tomorrow. ;-))
Scritto da: Sam H.
Thinner than I expected, but works
Does the job
Scritto da: Strat Man
Another tool in the battle against dust.
If you're trying to use this wye fitting with schedule 40 PVC pipe (which is *not* the same size as DWV pipe), you may want to consider using a 6" flexible coupling - it's a piece of cake. I used this Fernco unit (https://www.amazon.com/gp/product/B001AU6S8C/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) and no additional fiddling was needed for nice tight fit. As a bonus, it is a simple matter to adjust the orientation, if required.
Scritto da: nolan shinn
Great value
Did just what I needed at a fraction of the price of a comparable product from the original manufacturer
Scritto da: Atlanta customer
Dimensions are not accurate
The 4” ends are not actually 4”. They are smaller. This is important to me because smaller openings will cause pressure drop and reduced suction.
Scritto da: Hank W
Not a proper fit for my PSI dust collector
This y-fitting was a replacement for a broken fitting on my single stage PSI dust collector. The ID of the 6" portion was oversized, so I had to use black tape on the collector for a snug leak-free fit. Don't know if that is intentionally done by PowerTec or a flaw in manufacturing... but buyer beware.
Scritto da: dd
Great value
Using this "Y" for running two 4 inch bathroom fans to vent out one 6 inch wall vent.

Relaterede produkter

hot
NIBCO 5817 Cap Hub - ABS DWV, 3
3.5/5

kr 318.84

NIBCO 5817 Cap Hub - ABS DWV, 3
3.5/5

kr 318.84

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array