PacTool SA902 Gecko Gauge Sidebeklædning monteringssæt, til 5/16-tommer fibercement sidebeklædning installation Aluminium krop

Brand:PacTool

3.7/5

kr
860.18

PRODUKTBESKRIVELSE Knus dit næste kommercielle sidebeklædningsprojekt med vores PacTool SA902 Gecko Gauge Fibercementbeklædningsværktøj, ideelt til installation af én person og hjælper med at reducere arbejdstiden. Dette er et must-have til ethvert værktøjssæt til hjemmet. Dit næste shinglejob bliver mere overskueligt og produktivt med vores effektive spændeværktøj, der understøtter og måler cementpladebeklædning ved at fungere som et andet par hænder. Dette gør det muligt for dit sidespor at være plant og med tilstrækkelig afstand, mens du arbejder dig op ad væggen, hvilket i det væsentlige eliminerer behovet for ethvert layout. Den er justerbar til 5", 6", 7" og 8" sidespor. Denne måler har en patenteret friktionsknastmekanisme, der kraftfuldt holder et 12-fods stykke fibercementbeklædning til håndfri sømning og er konstrueret af et ekstra holdbart aluminium. Hos PacTool er vi kendt for vores enestående linje af udvendige produkter inden for bygge-, renoverings- og ombygningssektoren og sætter en ære i at levere exceptionelle løsninger, der hjælper med at reducere træthed og frustration for håndværkere, håndværkere og gør-det-selv-ere. FRA PRODUCENTEN Spar tid og penge ved at installere fibercementbeklædning med Gecko Gauge. Ved at bruge den praktiske sidesporsmåler kan én person installere sidespor hurtigt, mens han sikrer, at hver bane forbliver på niveau. Det vil hjælpe dig med at producere en ensartet sidesporsafsløring og reducere behovet for fo

Ingen tilgængelige enheder

EAN: 0645646902006

Kategorier Værktøj og boligforbedring, Værktøj & Håndværktøj, Håndværktøj, Værktøjssæt,

PACTOOL: Vi har haft tillid til i årtier og er førende inden for specialiserede konstruktions-, renoverings- og ombygningsdesign; Vores banebrydende produktlinje inspirerer håndværkere og gør-det-selv-ere til at arbejde smartere, måle bedre og reparere mere effektivt. PROFESSIONELT UDSTYR: Tag dit sidebeklædningsprojekt til næste niveau med vores kraftige entreprenør-kvalitet aluminiumshusbeklædningsværktøj; Dette produkt anbefales til brug med grundede (ikke-malede) beklædningsprodukter. MONTERINGSBLOK: Vores målere kan justeres til 5”, 6”, 7” og 8” sidespor, og den patenterede Friction-Cam-mekanisme understøtter hele 12' cementpladebeklædningslængder; Denne funktion sikrer perfekt og lige stor afstand mellem hvert bræt. SIDEVÆRKTØJ: Skub den, lås den, søm den; Disse håndfri clips er designet til at holde brættet i den korrekte højde og hjælpe med at installere fibercementbeklædning nemt, med mindre træthed, samtidig med at de producerer nøjagtige og ensartede sidespor. PRO GRIP CLAMP: Ideel til installation af en person, denne sidemonteringsblok måler og understøtter den næste bane til sømning, med praktisk talt ingen layouttid; Gør ethvert job ideelt til installation for én person med større nøjagtighed og 50 % hurtigere.

Batteries Included?	‎No
Batteries Required?	No
Batteries Required?	‎No
Brand	PacTool
Brand	‎PacTool
Color	Silver
Color	‎Silver
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 984 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎2.5 x 6 x 11 inches
Item model number	‎SA902
Item Package Quantity	‎1
Item Weight	‎1.5 Pounds
Manufacturer	‎PacTool
Material	Aluminum
Material	‎Aluminum
Part Number	‎SA902
Pattern	‎Mounting Kit
Power Source	Hand Powered
Power Source	‎Hand Powered
Product Dimensions	‎2.5 x 6 x 11 inches
Style	‎Aluminum body

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Jay Moore

Easy to use and perfect results.

I like it produces the same result time and time again. I used these to install 5/16 hardi cement fiber siding.

Scritto da: dex-fan

Quality

Product ok for the price.

Scritto da: M. Kepler

Don’t do siding without these.

I can’t recommend these clamps enough. I sided a 2200 sq ft house with Alura cement plank siding almost entirely by myself. Some reviews say that they scratch the planks - but I think if you’re installing pre-painted materials you’re asking for such trouble. Thats just not the way things work, and if you try you’ll be disappointed. Putting a finish on materials before installation is like washing dishes before you eat. Reviews also say they dont’t hold the planks well, or there is a gap that the plank can slip into. I can see how this might happen, but on this whole house i had a clamp slip once, and that was because i was trying to slide the plank along the clamp without lifting it - obviously an unsafe move. Under normal careful use the friction clamp seems to work fine. The gap issue wasn't a problem for me - its easy to get then to grip without over-clamping them and creating a gap. Honestly, if you can’t figure these out, you should not be building or repairing your house. You’re goinna poke an eye out or something. I would recommend that you buy some fiberlock nuts to replace the “acorn” nuts that hold the cam pins in place - the repeated use loosens them and the fall 20 feet off your scaffolding and you never find them. At Ace fiberlock nuts are like $0.35 each. So for an extra dollar i got a perfect tool. Not sure how long the friction pads will hold up - like i said, after one house they work fine, but Professional use might wear them out. But if you’re a professional, are you going to worry that an inexpensive tool only lasts 5 or 10 houses? I think just the materials for my siding project came out to over $4000, plus $1400 in scaffolding rental, blah blah, $$$$. Replacing this tool when it wears out is not going to cut into your profits much. Even if they were single-use it would be worth it, these clamps are so helpful.

Scritto da: Shang wei Tang

Probably the first time I used it, one was tight and one was loose, and I thought it was broken at first until I fixed it. But the design of the tool needs to be improved

Scritto da: dqchris

A must have for Hardy plank!

This is a must have tool for making your Hardy siding look great with even spacing.

Scritto da: Poodle Mom

Yep…

All the good reviews are definitely correct- these things are amazing!

Scritto da: Ady Almeida

Excelente.

Muy bueno, solo que se afloja muy rápido Pernos.

Scritto da: John Richardson

Good product

I had to keep tightening the bolts, but otherwise they worked great

Scritto da: Flavia

Good as gold

My husband used this clamps for cladding front and back of the house on his own. Five star definitely.

Scritto da: BRW

Great Product.

Used these gauges for installing Hardy Plank on my shed. As one of us cut the planking, the other installed onto the shed. Like any construction product - preparation simplifies the process. My helper had used them before which sped things along quite quickly. For two old guys - we planked the shed in two days.

Scritto da: Vincent

Égratigne un peux le revêtement

Va très bien mais égratigne un peux le revêtement foncé faut être délicat

Scritto da: Roman Panciuc

Plastic is better and easier to use

very narrow and hard to adjust

Scritto da: /T

Watch Thickness of Siding

This is my second set purchased. First set didn't work out due to buying the wrong model number for thickness of siding. Previous set were to big and would fall off the building.