Orbit 34784 PVC-Lock Flex Repair Fitting, 3/4, 3/4-tommer

Brand:Orbit

3.5/5

kr
275.92

Fra producenten Orbit er Nordamerikas førende virksomhed inden for boligvanding. Med tilstedeværelse i over 180 lande og 6 kontinenter tilbyder vi det mest komplette økosystem af løsninger på tværs af slangehane, slange, slange-ende, underjordisk, dryp, tåge og gårdbeskyttelse. I mere end et halvt århundrede har vi ledet industrien inden for innovative løsninger, akkumuleret over 100 aktive patenter og mange industrianerkendelsespriser. Fra PVC-Lock, Blu-Lock og Drip-Lock, som er en usædvanlig hurtig måde at forbinde sprinklerrør og dryprør på, til vores teknologisk avancerede, bedst sælgende B-hyve smart controllere, har vi moderniseret industrien, sat standard for bedste praksis for kunstvanding i boliger og gjort udendørs vanding effektiv for husholdninger rundt om i verden. Hydro-Rain er den banebrydende kommercielle og landbrugsmæssige pendant til Orbit, og byder på BUILT FOR SPEED-tilbud, der er udviklet specifikt til professionelle entreprenører og avlere. Sammen udgør Orbit og Hydro-Rain en forretningsenhed inden for Husqvarna Groups Gardena Division, der tilsammen omfatter verdens største producent af vanding til boliger. Fordi sikring af adgang til rent ferskvand for lokalsamfund er en global prioritet, er vi stolte af at bekræfte vores forpligtelse til at levere et omfattende økosystem af smarte løsninger, der dækker applikationer FRA HANE TIL GÅRD, mens vi løbende forfølger visionen om at ÆNDRE DEN MÅDE, HVORDAN VERDEN VANDER. .

Ingen tilgængelige enheder
Kun til ikke-konstant tryk, ikke-hovedledning, direkte nedgravning, udendørs kunstvanding med koldt vand. 18-tommer i længden. Begrænser eller komprimerer ikke ved bøjning. Ideel til uregelmæssige vinkler eller forhindringer. Ultimativ reparationsløsning: Giver mulighed for hurtig tilslutning af forkert justeret rør.
Customer Reviews 4.4 4.4 out of 5 stars 283 ratings 4.4 out of 5 stars
Item model number 34784
Item Weight 8 ounces
Manufacturer Orbit
Product Dimensions 17.75 x 1.75 x 1.75 inches

3.5

8 Review
5 Star
71
4 Star
13
3 Star
7
2 Star
4
1 Star
5

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Robert J. Gerndt
Can be glued in and used for constant pressure
The design of "O" Rings and Shark Bite is for convenience, but a better design would be simply to have standard PVC glued joints and then take away the stipulation of non-content pressure.....which means of course it is designed for use downstream of solenoid valves on sprinkler systems, which see pressure only when that zone is on. I called and was told I could glue it. It is rated for 100psi. Glueing was not a problem. And of course, no leaks and no worry of leaks on my constant pressure 45 psi line.
Scritto da: Eric Snow
Worked good.
Much better than sticking severe elbows and couplings together.
Scritto da: Kindle Customer
Poor instructions
Written installation instructions inadequate. I viewed a Youtube video on installation and followed it exactly but still had a leak on one end. The instructions say nothing about how to stop a leak after installation. I guessed the problem was incomplete seating on the leaking end. I fitted Channel Lock pliars on the connection at the leaking end and hammered the pliars toward the pipe being connected until that end properly seated. Turned on the water (40 PSI) and no leak. BTW, I had also purchased the Orbit release tools and pipe bevel in case I had to reinstall the flex repair pipe but thankfully l did not have to use it.
Scritto da: pwcwa
Had a had a leaking joint
Had a leaking right angle joint. Able to access line to and from for over 18 inches. Cut out joint and appropriate amount and unit fit right in with no problem and no leak
Scritto da: Steven S.
Works great but needed 1” for 3/4” PVC
Use OD measurement for correct sizing. Purchased 3/4” connector for 3/4” ID pipe. Connector was same OD size as pipe I was trying to connect to. My existing pipe was too large to slip into Orbit connector. Returned and bought 1” connector which went on easy as directed without any leaks.
Scritto da: Gary Shriver
Love It!
I use to use the ones that slid in and out but this was awesome! Kinda wished it was flexible enough to turn a complete circle to do a short run but it didn’t. Easy fix anyway. Glad I found this.
Scritto da: Hazard Area
Worked Great
This 3/4" item bends 90 degrees and easily. Don't know what others are talking about -- maybe 1" is very stiff. I roughly measured, cut off one end, shoved on the unit after wetting pipe with soap water and deburring, measured carefully for the final cut, and did the same, and both ends went on smooth and easy. No leaks although I roughed up the pipe a bit digging up the dirt, but used very fine sandpaper to remove any ridges, and if there is a leak, it is super slow. I also bought the Orbit 35809 PVC Lock Release Tools that had a deburring tool, and three lock release tools for different size pipes, just to have on hand if I screwed up. The deburring tool worked fine with no skipping and roughing up the edge.
Scritto da: Barry
Great repair item
Allowed me to repair a pool leak without having to call the expensive pool company.

Relaterede produkter

hot
NIBCO C4804 4 HXMIPT HANADAPTER PVC
3.6/5

kr 304.00

NIBCO C4804 4 HXMIPT HANADAPTER PVC
3.6/5

kr 304.00

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array