Nilight anhængertræk Tri-kuglemontering med krog og 5/8 trækstift klip passer til 2-tommers modtager vandret lodret, 2 års garanti

Brand:Nilight

3.9/5

kr
970.84

Nilight anhængertræk Tri-kuglemontering med krog Passer til 2-tommers modtager1. Heavy Duty anhængertræk: Vælg mellem en række trækkapaciteter, herunder 2.000 lbs., 6.000 lbs. eller 10.000 lbs, Krogkapacitet: 10.000 lbs. Perfekt til at trække trailer, autocampere, slæbning af motorcykler og ATV'er med 2-tommer standard hitch-modtager2. Produktdimensioner: Dette trailer hitchball-beslag leveres med et 2-tommer x 2-tommer skaft, der passer til stort set enhver industristandard 2-tommer modtager. Tredobbelt kuglebeslag med tre hitch-kuglestørrelser med krog, inklusive 1-7/8", 2" og 2-5/16" 3. Korrosionsbestandig finish: To trinfinish ved hjælp af E-Coat pre-coating og højkvalitets tekstureret sort pulverbelægning til langvarig korrosionsbestandighed4.Høj anvendelighed: Brugen af dette bugseringstilbehør gør den ideel til at trække og trække både, trailere, campere, husdyrtrailere, trailere til fritidskøretøjer, jordcykler, ATV'er, motorcykler og mere5.Nem at installere: Sådan installeres anhængertrækket kuglemontering på dit køretøj, skal du blot indsætte skaftet i dit køretøjs 2-tommer ophængsmodtager. Det runde håndtag gør installationen nem og inkluderer koblingsstift og anhængerkugle før drejningsmoment, så din trailer kan tilkobles med det samme

Beløb

Tilføj til kurv Køb nu

EAN: 0812227037727

Kategorier Køretøj, Eksteriørtilbehør, Towing Products & Winches, Ball Mounts,

Nem at installere - For at installere kuglebeslaget til anhængertræk på dit køretøj skal du blot indsætte skaftet i dit køretøjs 2-tommers trækmodtager. Det runde håndtag gør installationen nem og inkluderer koblingsstift og anhængerkugle før drejningsmoment, så din trailer kan kobles til med det samme. Høj anvendelighed - Brugen af dette træktilbehør gør den ideel til at trække og trække både, trailere, campere, husdyrtrailere, trailere til fritidskøretøjer, jordcykler, ATV'er, motorcykler og mere. Korrosionsbestandig finish - To-trins finish ved hjælp af E-Coat pre-coating og højkvalitets tekstureret sort pulverlakering for langvarig korrosionsbestandighed. Produktdimensioner - Dette kuglebeslag til anhængertræk kommer med et 2-tommer x 2-tommer skaft, der passer til praktisk talt enhver industristandard 2-tommer modtager. Tredobbelt kuglebeslag med tre hitch-kuglestørrelser med krog, inklusive 1-7/8", 2" og 2-5/16". Heavy Duty anhængertræk - Vælg mellem en række trækkapaciteter, herunder 2.000 lbs., 6.000 lbs. eller 10.000 lbs, krogkapacitet: 10.000 lbs. Perfekt til at trække trailer, campere, slæbning af motorcykler og ATV'er med 2-tommer standard hitch-modtager.

Brand	Nilight
Brand	‎Nilight
Country of Origin	‎China
Customer Reviews	4.9 4.9 out of 5 stars 26 ratings 4.9 out of 5 stars
Finish Type	Powder Coated
Item model number	‎92106B
Item Weight	‎12.82 pounds
Manufacturer	‎Nilight
Manufacturer Part Number	‎92106B
Material	Alloy Steel
Model	‎Nilight Trailer Hitch Tri Ball Mount with Hook & 5/8" Hitch Pin Clip Fits 2-Inch Receiver Horizontally Vertically
Package Dimensions	‎12.8 x 8.07 x 7.76 inches
Vehicle Service Type	ATV, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Sandy Miller

Nice!

Well constructed, very well packaged!!! Good buy!!! ????

Scritto da: Michael Santos

Great hitch ball mount

You can connect just about anything on this hitch. This has all the necessary fittings for different types of connectors which makes it easy since you’ll always have the right fit. I pulled a Uhaul trailer filled to the brim and later pulled an 8,000 lbs boat with no issues. It’s good and sturdy so I’d recommend to anyone in need of a hitch ball mount.

Scritto da: Tia Frazier

Heavy duty

This trailer hitch has multiple options and is very heavy duty. My husband loves it. I would definitely recommend this product as it seems to be made of nice quality material. Seems like it will stand up to the test of time as well.

Scritto da: B.A.R.

Heavy and sturdy

Came exactly as pictured. Seems well made and I didn't have any complaints on the construction. Fits easily into my hitch receiver and no issues with towing a trailer.

Scritto da: That Intellect

Very nice hitch!

This is a very nice hitch with loads of functionality. After a thorough inspection I would have no problem using this hitch at its stated tow ratings. All of the balls have small dings and imperfections in them which was a little bit disappointing and I think it is from the manufacturing process and also the paint definitely could have used a little more attention to detail because the way it is so uneven around the base of the balls. Not a big issue and I am easily overlooking those issues, just felt the need to mention them. 5 stars!

Scritto da: BDS

Durable and useful to have for towing a variety of trailers

I went to pick up a trailer from a friend a few weeks ago and wasn't paying close enough attention to what size hitch his trailer took. It all worked out and he loaned me a three ball hitch, but I decided it would be a good idea to have a multi-ball mount for handling stuff like that. This fits the bill, and contains a hook for added capability (although, in all honesty I don't know that there is much I'd use the hook for that I couldn't just loop over a ball). The mount fits well, contains the hitch pin and pin clip, and works well. I'd note that this uses box tubing for the shank instead of a solid bar like the one my friend loaned me. For my purposes it will do just fine, but if you're expecting the solid shank you'll be disappointed.

Scritto da: Jack Ingles

Solid utility hitch

Totally solid welded up hitch. I needed an upgrade from my older 3 ball hitch and wanted the hook specifically to pull some early mesquites. This is made of some heavy steel and the welds are fairly clean and plenty large. The hook is cast but polished and cleaned where needed and painted up for rust protection. The inside isn't coated and shows some surface rust but some light cleaning and oil should keep that alright, still might have been nice to get some paint in there. Comes with the hitch pin which is nice, my older one didn't. Feels like most of the paint will probably chip or wear off with heavy use but that is to be expected on anything really.

Scritto da: Old Dawg Games

A farm saver. Paid for itself in one week.

Here on the farm, we are always looking for things that save us time and labor. This four way hitch has done both. It is well designed, tough, and takes a beating. We pull hay trailers, garden carts, pull logs, and are constantly moving stuff. We use to have to spend so much time just changing out our hitches on the truck. This four way solved that issue. It has eliminated so much wasted time(and money). We should have gotten one of these before. For us, well worth the money. Very, very, pleased.