Monarch regnkæder 20042 aluminium sort pulverlakeret tagrende adapter regnkæde installation, standard

Brand:Monarch Rain Chains

3.7/5

kr
292.23

Monarch's sorte pulverlakerede tagrendeadapter i aluminium til installationssæt til regnkæde, standardstørrelse forbedrer vandgennemstrømningen, reducerer sprøjt og komplimenterer din regnkæde. Passer til de fleste tagrender og leveres med en ekstra kobberplade til at passe til større tagrender. Nem installation, der ikke kræver værktøj.

Ingen tilgængelige enheder

EAN: 0633402200428

Kategorier Patio, Plæne & Have, Udendørs Dekoration, Regnkæder,

OVERORDNEDE VARENS DIMENSIONER: Regnkæderens reduktionsmåler 5" (L) x 3,5" (B) x (3)" H. Topåbning 2 tommer, bundåbning 1,75 tommer; Sørg for at rengøre dine tagrender, før du installerer regnkæde-tagrendeadaptersættet til din udendørs regnkæde. LET INSTALLATION: Tagrendeinstallatøren fastgøres nemt direkte på toppen af ​​tagrendekæderne. Messingbolten på regnkædens tagrendeadapter small har en midterrille til at hænge og fastgøre regnkæderne til tagrender. ØG KANSTAPPEL: En regnkædeinstallatør, i kombination med regnkædenedløb til tagrender, tilbyder en unik kantstensappel, som vil forbedre udseendet af dit hjem. Fuldend looket ved at tilføje et af vores forankringsbassiner eller forankringspæle. KONSTRUKTION AF PREMIUM KVALITET: Regnkæderenneinstallatøren er lavet af aluminium med en messingbolt til at hænge din regnkæde op. Regnkædesættet giver en sikker sømløs måde at hænge dine regnkæder fra tagrenden på. FUNKTIONELT DESIGN: Regnkædeadapteren er designet til at passe i tagrenden over afløbshullet, hvor der er et nedløbsrør. Regnkædeholderen fanger regnvand og tilspidser for at lede vandet fra tagrenden ind i regnkædens nedløb.
Country of Origin India
Customer Reviews 4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number 20042
Item Weight 4.6 ounces
Manufacturer Monarch Rain Chains
Product Dimensions 5 x 3.5 x 3 inches

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
2
1 Star
2

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Juana
Useful
These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.
Scritto da: Cary Alburn
A pain to install, but once installed, worked perfectly.
The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!
Scritto da: Goldens
Was exactly what we needed
Great fit for our rain chain
Scritto da: Meche
Larger adapter plate very helpful!
This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached
Scritto da: Amazon Customer
Seems sturdy
I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.
Scritto da: Robert D.
Necessary to attach chain to gutter.
There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.
Scritto da: R S Cobblestone
Works great!
Works great with a Monarch Rain Chain link in my downspout!
Scritto da: JMLMT
Perfect and easy to install
This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure
Scritto da: Francisco Garcia
Muy resistente
Todavia no lo instalo, pero es muy resistente
Scritto da: Leslie K.
Bad fit
They didn’t fit in my eves troughs. Totally useless and too late to return
Scritto da: Shannell
Superfluous to need
As above
Scritto da: Tinus
Good
Good system for rain chains
Scritto da: Judith A
easy to install addition to the rain chain
essential addition to the rain chain

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array