MAGID TRX746 Windstorm Series Impact Handsker

Name: MAGID TRX746 Windstorm Series Impact Handsker
Brand: MAGID
Price: 464.53 DKK
Availability: InStock

Brand:MAGID

3.1/5

kr
464.53

Hvis din arbejdsplads omfatter opgaver, der kræver håndbeskyttelse, fleksibilitet og varmebestandighed, skal du ikke lede længere end disse MAGID T-REX TRX746 Windstorm Series snitbestandige slaghandsker. M-Flex Defense System inkluderer det ultrafleksible TPR-design med 130 integrerede flexpunkter for nem håndtering af enhver størrelse objekt. RepTek„¢ Grip-håndfladen øger varmemodstanden og giver et overlegent tørt greb. Sikkerhedshandskerne inkluderer også en forstærket tommelfingersadel og ekstra TPR-beskyttere mellem tommelfingeren og pegefingeren for at sikre disse almindelige klem- og fangpunkter. For komfort har disse niveau A6 snitbestandige handsker et håndfladepudesystem, der hjælper med at dæmpe stød, og CoolMesh Venting System for at forbedre luftstrømmen og øge varmeafledningen. Disse komfortforbedringer holder dine medarbejdere i gang med opgaven og hjælper med at tilskynde arbejdernes overholdelse for et sikrere arbejdssted. ANSI 2011 Skæringsniveau: 4 ANSI 2016 Snitniveau: A6 ANSI Slidniveau: 4 ANSI Slagniveau: 1 Belægning: Ingen belægning Belægningsmateriale: Syntetisk læder Belægningsmønster: Palmepels Farver: Grå Handsketype: Fuldfinger ID Trækflip: Ingen stød Beskyttelse: TPR Slagbeskyttelse: Ja Materiale: Læder Materiale: Mesh Materiale Vægt: Medium Vægt/Standard Håndflade: Ikke-polstret håndflade Polstring: Upolstret Forstærket skridt: Ja Skalfarve: Sort Størrelse: Stor Stil: Mekanik Tommelfinger Skridt: Ja Type: Hånd Specifik håndledslukning: krog og løkke

Ingen tilgængelige enheder

EAN:

Kategorier Værktøj og boligforbedring, Sikkerhed & Sikring, Personligt beskyttelsesudstyr, Hånd- & Armbeskyttelse, Lab, Sikkerheds- og arbejdshandsker, sikkerhedsarbejdshandsker,

ANSI niveau A6 skæremodstand ved håndfladen, ANSI niveau 4 slidstyrke og ANSI niveau 4 punkteringsmodstand. RepTek Grip-håndfladen øger varmebestandigheden og giver overlegent tørt greb. Cool Mesh Venting System forbedrer luftstrømmen med op til 60 %, hvilket resulterer i hurtigere varmeafledning end traditionelle stoffer, der almindeligvis findes på lignende slaghandsker. Ekstra TPR-beskyttelse mellem tommelfinger og pegefinger sikrer almindelige klempunkter. Nyt og forbedret back-of-hand m-flexes forsvarssystem bruger ultra-flex tpr design med 130 integrerede flex point, pinch-point fingerbeskyttelse og ventilation for åndbarhed.

Brand	MAGID
Color	A6 Reptek Palm
Department	Unisex-adult
Item model number	TRX746L
Manufacturer	MAGID
Material	Leather
Product Dimensions	10 x 5 x 0.6 inches; 7.76 Ounces
Size	9/L
Special Feature	Cut Resistant

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: D. Licious

Loose fit, numb feel. Decent quality on first impression

Without being able to test these rigorously, my first impression is that the fit isn't great. I am kind of a gear addict. I try a lot of different types of gloves. I bought these to replace a pair of non-cut-resistant gloves to use on vehicle extrication scenes. I had a piece of laminated glass slice through a pair of goat leather work gloves and didn't want a repeat. The palm feel is rubbery and somewhat loose, which is perhaps somewhat to be expected for this type of glove. Another pair of cut resistant glove I used has a similar floaty feel due to the cut-resistant layer (I think that's what it is) but fit much better. It feels loose on my fingers, it is even looser around the wrist. I have smaller hands, so that might contribute. I usually don't have an issue finding gloves that fit well, though.

Scritto da: Erik Ray

The Velcro is Barely On There

The Velcro is barely On There it Wont Last a Month, And I Will Have To Tape Them On Or Something. I Like The Grip These Have it is Nice, Outside of The Velcro is Cheaply On There I Would Have Given 5 Stars, Butt That Is A BIG ISSUE

Scritto da: Scooter

Great glove.

Great gloves. The company I work for require cut level 5 impact resistant gloves. We have tried a bunch of them but these I bought for myself are the best there is. Guys who hate wearing them don’t mind wearing these. 5 stars for sure. The rubber on the inside don’t hold up that well but that’s not a big deal.

Scritto da: Amazon Customer

the grip I get with this product is most important

I carry glass and never worry about my hands sliding or getting cut you can feel the tight grip. Your hands do get a little warm but the safety I feel with these gloves is a good trade off

Scritto da: Robert K.

Not as tough as they'd have you believe

The puncture resistance is not as high as they claim ,a simple splinter won't get through but a sharp piece of metal with light pressure will.The cut resistant and puncture resistant material is only on the palm and under hand part of the glove ,it gives better control of movement and is great for hot humid weather but give no protection from the sides or top.The impact material is glued and not stitched on like with other Magid gloves ,meaning it is more likely to tear off.Unlike most cut resistant gloves these are not knit ,mean less protection but more flexibility.The stitching around the wrist is weak and fraying .Also the wrist is too far down the arm ,so the while the fingers and thumb are a good fit they tend to slide up and the finger tips become loose ,advise for a second strap on the wrist

Scritto da: Jarl olson

Good

Well the are comfortable but they run big it took about a month to destroy them but at my work most gloves only last 2 weeks to destroy so getting a month out of them is pretty good

Scritto da: Jeffrey Holt

Just what I needed

These are my first pair of impact resistant gloves and I love them. Fingers are free to do any task I need to do with no bulky feeling. GREAT GLOVES!

Scritto da: bboyer8690

Horribly inconsistent.

I have bought 4 pairs of these gloves. I work for a junk removal company, and deal with a variety of different environments that are especially punishing on my hands. The first pair fit perfectly, they were the green/yellow with white palm version. Durability was pretty good, the grip honestly was very lacking, they were so smooth they were slick. They lasted a while before they were split open at work from some nails. The 2nd pair, fit even better somehow, they were the black and yellow version. A little bit better on the grip, not much. These lasted a bit until I got a 3rd pair due to having to throw them out from doing a disgusting job. The 3rd pair was a bit loose. At the time of writing [11.21.19] I still have them. They're starting to wear down and come apart at the seems. 4th pair, with images attached to this review look so poorly made and fit so horribly I exchanged them for completely different gloves.