Lutron DVSCCL-153P-PD LED+ lysdæmperkontakt, 1 pakke, palladium palladium 1 pakke lysdæmper

Brand:Lutron

3.7/5

kr
558.30

PRODUKTBESKRIVELSE Lutron LED+ lysdæmpere giver den bedste dæmpningsydelse for LED-pærer, mens de indstiller det rigtige lysniveau for at forbedre humør og stemning til enhver aktivitet. Designet specielt til dæmpbare lads og CFL, såvel som til brug med traditionelle gløde- og halogenpærer, forbedrer de dæmpningsydelsen i høj grad sammenlignet med standard lysdæmpere. Med avanceret kredsløb designet til at afhjælpe almindelige udfordringer, såsom flimmer og pop on, er LED+ lysdæmpere kompatible med 800+ pærer - for mere specifikke detaljer om kompatible pærer, se tekniske specifikationer nedenfor. Diva-dæmperen matcher eksisterende indretnings- og stilomskifter og passer i en standardindretning en stilvægplade (CW-1-WH). den har en stor paddle-kontakt, der tænder/slukker lyset og returnerer dem til dine foretrukne forudindstillede indstillinger, sammen med en diskret skyder, der lyser op eller dæmper lysene, så de passer til enhver aktivitet. FRA PRODUCENTEN Styr den næste generation af belysning med Lutrons dæmpbare C.L lysdæmpere! Indskruningsdæmpbare kompaktlysstofrør (CFL'er) og indskruede dæmpbare lysdiodelamper (LED'er) er et fantastisk energibesparende alternativ til gløde- eller halogenlyskilder; dog kan det være svært at dæmpe dem. Lutrons nye lysdæmpere med HED-teknologi giver en løsning til at afhjælpe dine dæmpbare CFL- og LED-dæmpningsudfordringer, mens de indstiller det rigtige lysniveau for at forbedre humør og stemning. Diva-dæmpbare CFL/LED-dæmpere med HED-teknologi har avancerede dæmpningskredsløb, der er designet til kompatibilitet med de fleste højeffektive pærer. Med de samme funktioner som Lutrons Diva-dæmper tænder/slukker den store pagaj-kontakt lyset og vender tilbage til din yndlingsindstilling. Den diskrete skyder justerer lysniveauet, så det passer til enhver aktivitet. Disse lysdæmpere forbedrer dæmpningsydelsen af ​​dæmpbare CFL'er og LED'er sammenlignet med standard lysdæmpere. Lutron-dæmpere med HED-teknologi giver også fuld-range dæmpning til halogen- og glødepærer, hvilket sikrer, at dagens lysdæmper er kompatibel med morgendagens lyskilder. Lysdæmperen kan endda dæmpe en blandet belastning af lyskilder (dvs. LED og halogen eller CFL og LED pærer på samme kredsløb).

Ingen tilgængelige enheder
Inkluderer (1) Diva LED+ (tidligere C.L) lysdæmperkontakt; koordinerende vægplade sælges separat. Padlekontakt tænder/slukker lyset og returnerer lyset til forudindstillet niveau. Praktisk skyder dæmper og lysner. Kan bruges i enkeltpolede eller 3-vejs applikationer. Virker med op til 150 watt dæmpbare LED/CFL-pærer eller 600 watt glødepærer/halogenpærer. Fungerer også med ALLE glødepærer og halogenpærer. Driftstemperaturer 32 °F til 104 °F (0 °C til 40 °C). Giver den bedste dæmpningsydelse for dæmpbare LED-pærer (kompatibel med 800+ pærer for mere specifikke detaljer se tekniske specifikationer nedenfor).
Batteries Required? ‎No
Brand Lutron
Brand ‎Lutron
Circuit Type 3-way
Circuit Type ‎3-way
Color Palladium
Color ‎Palladium
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 12,060 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎Satin
Included Components
International Protection Rating IP00
International Protection Rating ‎IP00
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH 1.75 x 2 x 4.2 inches
Item Dimensions LxWxH ‎1.75 x 2 x 4.2 inches
Item model number ‎DVSCCL-153P-PD
Item Package Quantity ‎1
Item Weight ‎4.3 ounces
Manufacturer ‎Lutron
Material Satin
Material ‎Satin
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Number of Items ‎1
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Operation Mode Automatically,Off,Paddle Switch
Operation Mode ‎Automatically,Off,Paddle Switch
Part Number ‎DVSCCL-153P-PD
Product Dimensions ‎1.75 x 2 x 4.2 inches
Size ‎1 Pack
Style ‎Dimmer
Switch Style Dimmer Switch
Switch Style ‎Dimmer Switch
Unit Count ‎1.0 Count
Voltage ‎120 Volts
Warranty Description ‎One year limited warranty
Wattage ‎600

3.7

13 Review
5 Star
80
4 Star
12
3 Star
4
2 Star
2
1 Star
3

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Michele
What’s needed for led dimmable bbs
Gotta have to keep new led dimmable bbs from flickering, it’s not the bulb-it’s your switch. Worked perfectly. Will hang on to old switch for other location in case those break.
Scritto da: sgsed
An excellent product - some pieces missing
This product was just what I needed to convert two lights, one LED, and one incandescent light, to dimmers. One of the dimmers was lacking the wire nuts and screws necessary to complete the conversion. Luckily, I have a lot of wire nuts so it was not a problem for me. That particular package was also quite beat up. I'd guess that the switch was probably a return from another customer. In any event, the switches worked well and match my existing Lutron switches so all is well. Some quality control on items going out the door is probably in order.
Scritto da: Bob K.
Lutron Diva LED+ Dimmer for Dimmable LED
I have these dimmers in areas throughout my home, I really like it. Easy to set up and use.
Scritto da: John F Rao
Disappointed. Does not dim G4 LED bulbs
This dimmer switch main package and description states it dims LED bulbs but once I installed the switch I found that it does not dim G4 LED bulbs. Wasted a lot of time and full price of the switch. The instructions inside the package states it only works with screw in type LED bulbs. That information should have been on the product description as it is very important. Very disappointed with this product and the poor description that does not indicate that it only works with certain types of dimmable LED bulbs.
Scritto da: JayMK
Work perfectly!
Excellent value and works perfectly - what more could one ask for?
Scritto da: Edcadktech
No flickering even when the water heaters on
We have an on demand water heater and when it kicks on it causes some of our LED bulbs to flicker. You can manage not paying attention to it in some locations but this is installed in a half bath. When you use hot water in the sink the lights would flicker. The old switch was supposed to be LED compatible but the water heater caused noise on the power line and the dimmer switch couldn’t handle it. This switch solved the problem. I have it paired with a Cooper SMD6XWH LED light and my on demand water heater is a ECO Smart ECO27. Hope this helps someone else with a similar issue.
Scritto da: David Steele
It works, a bit tricky to install
Does what it is supposed to do, but I really wish I'd known there would be wires already attached to the back. I've not done a dimmer before, so maybe that's normal, but it made getting everything into the already crammed light switch box really challenging.
Scritto da: Bill W
Great dimmer for LEDs!
Works great with LED bulbs. Stylish switch that fits and works perfectly.
Scritto da: PL
Does the job but feels cheap for the price
Pros: -Does the job. Cons: -Razor-thin dimming slider is hard to grasp, unpleasant to the touch. -Switches sound and feel hollow when flicked. Cheap feeling. -Fins are thin. Screws heads can easily warp and go past the screw holes if you overdrive them. I had to insert washers as backing. Overall: Not enough quality for the price. Recommendation: I went with a Pass & Seymour Radiant dimmer instead. Has none of the cons above.
Scritto da: GuyInYYZ
Nice fixture
This product is easy to install. It works really nice and looks pretty good as well.
Scritto da: Neal Roberts
Good dimmer
This dimmer was easy to install and works well, with no buzzing of the dimmer or the lights. It can be used to replace a single switch or two-switch system. A bright/dim controller allows adjustment of the lights at their minimum. Even at minimum setting the switch powers up the lights. This dimmer can be installed with a regular faceplate and two screws, but comes with a screwless faceplate. This has to be removed for installation. This is fairly simple to do before mounting as you can get to the back of the plate to release the hooks. But once the plate is snapped on to the dimmer, it seems trickier to remove, with the possibility of breakage. The bright/dim controller is only accessible with the faceplate off. I'd like to check the bright/dim controller settings on the Lutron dimmers that came with the house, but have chickened out for fear of breaking the plate.
Scritto da: Jordan
Easy to set up and use
This is my 5th dimmer switch and they all work great!
Scritto da: Homer
Lurton a quality product.
Very neat and easy to install.

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array