LENOX Tools Skæreskive, Diamond Edge, 3-tommer (1972918) One Size

Name: LENOX Tools Skæreskive, Diamond Edge, 3-tommer (1972918) One Size
Brand: Lenox
SKU: 0885363171686
Price: 317.80 DKK
Availability: InStock

Brand:Lenox

3.6/5

kr
317.80

Lenox MetalMax er den nye standard for metalskærende slibemidler. Banebrydende diamantteknologi leverer 1.000 eller flere snit (30 gange længere levetid end tynde bundede skæreskiver)* uden at ofre hastighed eller finish. Fremstillet af massivt stål for i høj grad at reducere risikoen for brud, kombinationen af et stålhus med en diamantkant tillader MetalMax at holde sin originale hjuldiameter indtil sidste snit, hvilket betyder bedre kontrol, rækkevidde og skærepræcision gennem hele hjulets levetid. Det forbedrede design reducerer støvpartikler væsentligt og mindsker lugt. Lenox MetalMax er velegnet til metalskæring, herunder stål, metalplader, rustfrit stål, armeringsjern, støbejern, aluminium og ikke-jernholdige metaller, og arbejder med samme hastigheder og fremføringer som tyndt bundne slibeskiver.

Beløb

Tilføj til kurv Køb nu

EAN: 0885363171686

Kategorier Industri og videnskab, Abrasive & Finishing Products, Slibende hjul & skiver, Cut- Off Wheels,

Slides ikke som bundet slibemiddel, hvilket reducerer støvpartikler til en renere arbejdsstation. Bevarer den originale hjuldiameter i hele klingens levetid for bedre kontrol, rækkevidde og præcision. Solid stålhjulskrop reducerer i høj grad risikoen for brud for øget sikkerhed, øget produktivitet, reduceret nedetid og en lavere pris pr. snit sammenlignet med tynde limede skærehjul. Avanceret diamantteknologi giver 30 gange længere levetid end tyndt bundne skæreskiver i metalskæringsapplikationer* *Gennemsnitlig ydeevne i 1” kulstofstål firkantet rør vs. tyndt bundede slibeskæreskiver. Leverer 1.000 eller flere snit uden at skifte hjul.

Assembled Diameter	3 Inches
Assembled Diameter	‎3 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Lenox
Brand	‎Lenox
Color	‎Multi
Country of Origin	‎Korea, Republic of
Customer Reviews	4.5 4.5 out of 5 stars 526 ratings 4.5 out of 5 stars
Cutting Diameter	‎3 Inches
Grit Material	Diamond
Grit Material	‎Diamond
Grit Number	‎60
Grit Type	Fine
Grit Type	‎Fine
Included Components	‎LENOX DIAM CUTOFF WHEEL DG 3" X 3/8"
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	4.9 x 5.6 x 7.9 inches
Item Dimensions LxWxH	‎4.9 x 5.6 x 7.9 inches
Item model number	‎1972918
Item Package Quantity	‎1
Item Weight	‎2.08 ounces
Manufacturer	‎Lenox
Material	‎Blend
Measurement System	‎Metric
Part Number	‎1972918
Product Dimensions	‎3"L x 3"W
Product Dimensions	‎4.9 x 5.6 x 7.9 inches
Size	‎One Size
Thickness	‎1 Inches
Warranty Description	‎Limited lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: My Car Doc

It will cut!

And really, isn't that what you're buying the doggoned thing for? BTW, do NOT attempt to slice pizza with your power rotary cutter in the shop. Just sayin'.

Scritto da: Tom Kay

Vibrates more than abrasive blade.

The five "teeth" make it noisier and vibrate more when cutting than an abrasive blade. I have not used it enough to comment on longevity.

Scritto da: Nathaniel

Good product overall.

I got this so i didnt have to change cutting wheels on my die grinder so often. It's the normal corded dewalt end grinder. I dont believe it has enough amps to effectively use this wheel. It's a shame because metalmax is a good product and i'm sure it works well for others, or even more powerful die grinders. Probably could still be useful on small cuts or notching.

Scritto da: Mitch Martin

Lasts a very long time

This cutting wheel lasts a very long time. Have used this on mild steel sheets, rebar, cutting old welds, and a little bit of aluminum. The cuts are a little wider than a typical cut off wheel, but has so far out lasted them. The amount of dust generated has also dropped significantly. No damage to the blade so far and should continue to last a long time. Pros: Well balanced. Doesn't cause the die grinder to shake much at all Less dust from cutting Long lasting Saves time not having to change out wheel Cons: Has more bit to it, so more care when starting a cut is needed

Scritto da: The Dancing Banana

Takes flight in a Rotozip- taking the whole Direct Drive attachment with it!

Even though it fit my Rotozip, it causes the Direct Drive attachment to come off the tool and fly around the room even when it is as tight as you can get it. I think it has something to do with the aerodynamics because it flies around fast, then hovers like a little helicopter and, as it slows down, drops to a gentle landing. I tried three times to get it to stay on the tool and finally, fearing for my life, gave up. Guess it just doesn't want to work with a Rotozip but seeing it fail looked both really cool and really terrifying. Back to ceramic cut-off wheels for me.

Scritto da: Philip Anderson

Extremely durable and capable cutting wheel

I use it on my Milwaukee hand held 12V cutting tool. This wheel makes it easy to cut conduit from 1/2" - 1" quite efficiently. I really like what this does to expand the use of the Milwaukee tool. Really tough and durable, lasts a long time in use. On softer materials, copper, plastic, etc. works very well.

Scritto da: D. Scott

Name brand performance

I bought this diamond cutter wheel for cutting sheet metal on some bodywork. But, I needed to section the outer race on a failed roller bearing. The cutter was already in the cut off tool, so even with the reviews that said this wheel couldn't cut itself out of a wet paper sack, I gave it a shot.I don't know if my technique is better, but this wheel cut through the hardened bearing race like it was butter. The Lenox hole saws and utility knife blades have always done well by me. This blade is no exception.

Scritto da: Jeffery Kaighin

Latest Cutting Technology!

Wonderful upgrade to reduce cutting time! Innovation at its finest! This is the best cut off wheel ever. Cuts fast and cools off quick! I stand behind this product 100%!

Scritto da: Brian

Very durable, cuts mild steel well

great blade for light duty cutting, aluminum, stainless, mild steel all cut like butter and the blade has stayed sharp for the few dozen cuts I've done. Price is similar to that of a pack of other cut off wheels, not changing wheels is convenient enough to go with this over others. Don't use it on hardened steel or any hybrid steels as it will dull within a few inches. Not really the purpose and a torch should be used for these cuts but this is what I had on hand and this use case should be avoided.

Scritto da: RK

Okay

Not as good a the lower rpm 4 1/2" wheel for angle grinder. Lasts longer if the rpm is kept well under 20k.