0
0

Total:kr 0.00

Se vognCheckout
LoginRegister
0

Total:kr 0.00

Se vognCheckout
LoginRegister

IVY Classic 45364 1-tommer x 3/16-tommer hex-indsatsbit, Impact Plus, 10-pak 1 x 3/16 hex-bit 10-pak

Brand:IVY Classic

3.6/5

kr
220.44

Længde: 1-tommer, Størrelse: 3/16-tommer sekskant, skaft: 1/4-tommer sekskant. Præcisionsbearbejdet for ideel pasform og overlegen holdekraft. Varmebehandlet og hærdet til Rockwell Hardness 60 - 62, sandblæst finish forhindrer rust. Designet til at modstå det høje drejningsmoment (rotationskraft) fra slagdrivere, Impact Plus (registreret varemærke). Højkvalitets S-2 værktøjsstål for ekstra styrke og holdbarhed.

Ingen tilgængelige enheder

EAN: 0738226453644

Kategorier Værktøj og boligforbedring, Værktøj & Håndværktøj, Elektroværktøjsdele og tilbehør, Skruetrækkerbits, Sokkelbits,

Længde: 1-tommer, Størrelse: 3/16-tommer sekskant, skaft: 1/4-tommer sekskant. Præcisionsbearbejdet for ideel pasform og overlegen holdekraft. Varmebehandlet og hærdet til Rockwell Hardness 60 - 62, sandblæst finish forhindrer rust. Designet til at modstå det høje drejningsmoment (rotationskraft) fra slagdrivere, Impact Plus (registreret varemærke). Højkvalitets S-2 værktøjsstål for ekstra styrke og holdbarhed.
Brand IVY Classic
Drive System External Hex
Item Dimensions LxWxH 1 x 0.25 x 0.25 inches
Material Alloy Steel
Size 1" x 3/16" Hex Bit

3.6

9 Review
5 Star
74
4 Star
14
3 Star
7
2 Star
2
1 Star
4

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Amazon Customer
If you’re a grip, get these.
I’m a grip in the film industry and needed these for my speed wrench. These fit the Cal Van finger drives and work just fine. I used loctite (superglue) to keep it from falling out of the finger drive.
Scritto da: Operator
Bulk at a decent price.
I lose 3/16 bits all the time, and 10 for $15 is way better than going to a hardware store to buy a multi-bit kit in different sizes for the same price.
Scritto da: G-wiz
Are these a bit small? or Is it just me?
The bolts to my VW Passat engine intake are a little odd, I guess. I've been using 5mm, but I noticed that only 1 5mm bit fits. I noticed that it's 3/16. "Great. These fit better." But I get some more because I keep dropping them. These are very sloppy. OK, so all these are Chinese made. Everything is Chinese made and I have no problem with that. However, to really properly assess these, I think I need to bring my calipers out the next time and measure all my 5mm and 3/16 bits and figure out what the heck is going on here. I AM sure those bolts are 3/16. These bits are too loose. Of all the 3/16 bits I have, these are the smallest, and could cause a problem. They're so loose that if they were any smaller, they'd just turn in the bolt head under pressure and possibly get stuck or break the head. Beyond this, I'll need to measure them and compare with all my old Allen wrenches. I have some old, made in USA ones, I'll compare with those. I'll revise this when that happens. My current verdict is that these are too small. More like 4mm.
Scritto da: Adam
Mostly good but very hard.
Got these for my job of checking screw tightness. The fit is looser than I would like but the steel held up well. Got through about 3500 screws before I had to chuck it. The loose fit caused the little wear it had to be enough to start slipping in the screw. It the fit were a bit tighter it would be an absolute fantastic bit. Update: after working with them for a couple months I downgraded to 3 stars. The bit is very hard, therefore very brittle. I have snapped so many of these it is kinda sad. Metal doesn't deform which is good but they snap decently easy with a t handle bit holder.
Scritto da: Timothy Bergstrom
Perfect. - Its good to have lots of quality bits.
I use these for Grip work. These are good quality.
Scritto da: Allan
Good quality, well made 1/8" bit drive
Great for what it is. A good quality 1/8" bit that does the job well. Fits well with no "slop" when under pressure. Good price too.
Scritto da: BENJAMIN D ZUCKER
Item does not match the picture.
I ordered this because it looked more durable than other brands. But after I received it, they look different. Not what I was expecting.
Scritto da: Dave
It works
It’s just a basic bit. It work great for my use
Scritto da: Enrico Gagnon
Correct
Bon pour le prix

Relaterede produkter

hot
DEWALT skruetrækkersæt, #2 Phillips, 2-tommer Power Bit, 5-Pack (DW2115)
3.6/5

kr 212.64

DEWALT skruetrækkersæt, #2 Phillips, 2-tommer Power Bit, 5-Pack (DW2115)
3.6/5

kr 212.64

hot
Wiha 72596 10 stykke bitsæt hex tomme
3.8/5

kr 199.13

Wiha 72596 10 stykke bitsæt hex tomme
3.8/5

kr 199.13

hot
BOSCH ITT152B 10-pak 2 i. Torx #15 Impact Tough Screwdriving Power Bits
3.5/5

kr 271.36

BOSCH ITT152B 10-pak 2 i. Torx #15 Impact Tough Screwdriving Power Bits
3.5/5

kr 271.36

hot
Wiha 71692 Bit Selector med IP3 - IP20 TorxPlus Bits
3.9/5

kr 533.47

Wiha 71692 Bit Selector med IP3 - IP20 TorxPlus Bits
3.9/5

kr 533.47

hot
BOSCH ITP2R21B 10-Pack 1 In. Phillips/Square #2 Impact Tough Screwing Insert Bits 1 In. Indsæt bits 10-pak
3.6/5

kr 207.58

BOSCH ITP2R21B 10-Pack 1 In. Phillips/Square #2 Impact Tough Screwing Insert Bits 1 In. Indsæt bits 10-pak
3.6/5

kr 207.58

hot
Wera 05059897001 855/4 PZ/S PlusMinus bits, 2 x 70 mm
4.1/5

kr 315.93

Wera 05059897001 855/4 PZ/S PlusMinus bits, 2 x 70 mm
4.1/5

kr 315.93

hot
Bondhus 43786 17mm ProHold 1/2 drevsocket kugleende bit m/ProGuard finish, 6
3.9/5

kr 479.39

Bondhus 43786 17mm ProHold 1/2 drevsocket kugleende bit m/ProGuard finish, 6
3.9/5

kr 479.39

hot
BOSCH ITPH21B 10-Pack 1 In. Phillips #2 Impact Tough Screwing Insert Bits 1 In. Phillips #2 Insert Bits 10-Pack
3.7/5

kr 208.09

BOSCH ITPH21B 10-Pack 1 In. Phillips #2 Impact Tough Screwing Insert Bits 1 In. Phillips #2 Insert Bits 10-Pack
3.7/5

kr 208.09

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array

Total:kr 0.00

Se vognCheckout

Kategorier

Alle kategorier
Menu Kategorier Nær ved Vogn

Menu