Hunter Fan Company 50472 Stockbridge indendørs loftsventilator med LED lys og trækkædekontrol, 70, ny bronzefinish

Name: Hunter Fan Company 50472 Stockbridge indendørs loftsventilator med LED lys og trækkædekontrol, 70, ny bronzefinish
Brand: Hunter Fan Company
SKU: 0049694504722
Price: 5187.26 DKK
Availability: InStock

Brand:Hunter Fan Company

3.3/5

kr
5187.26

Stockbridge loftsventilator med massetiltrækning passer perfekt ind i dit hjems moderne interiørdesign. De smukke, rene finishmuligheder arbejder sammen med den høje kontrast af vinkler i hele designet for at skabe et look, der vil holde dit rum aktuelt og inspireret. LED light loftventilatoren har fuldt dæmpbare, højeffektive LED-pærer, der giver dig total kontrol over din belysning. Denne justerbare blæser kommer med et monteringssystem i tre positioner, der giver mulighed for standard-, lav- eller vinklet montering. 13-graders bladstigning optimeret for at sikre ideel luftbevægelse og maksimal ydeevne. 2-tommers downstang sikrer korrekt afstand fra loftet og optimerer luftbevægelsen ved din foretrukne bladhøjde. Denne vendbare ventilator kommer med ventilatorblade med omvendt rotation, der holder rummene i dit hjem kølige om sommeren og varme om vinteren. Ideel til brug i rum eller rum med lofter på 9 fod eller derover.

Beløb

Tilføj til kurv Køb nu

EAN: 0049694504722

Kategorier Værktøj og boligforbedring, Belysning & Loftsventilatorer, Ceiling Fans & Accessories, Ceiling Fans,

PLACERING AF RUM: Indendørs ventilator er højdejusterbar, via de medfølgende 2 downstang, for at sikre korrekt afstand fra loftet og optimere luftbevægelsen; Ideel ventilator til stue, stue, soveværelse, børneværelse og vuggestue. TRÆKKÆDEKONTROL: Tænd/sluk den nye bronzeloftsventilator og juster hastigheden hurtigt og nemt med trækkæderne. LED SKÅLYSKIT: Energieffektive dæmpbare LED-pærer lader dig styre belysningen og stemningen i boligen; De langtidsholdbare pærer har længere levetid end traditionelle pærer. MULTI-HASTIGHEDSREVERSIBLE VENTILATORMOTOR: Whisper Wind-motor leverer ultrakraftfuld luftstrøm med stille ydeevne; Skift retningen fra downdraft-tilstand om sommeren til updraft-tilstand om vinteren. KLASSISK LOFT VENTILATOR: Den traditionelle Stockbridge ventilator kommer med LED lys dækket af snefnug scavo glas, der vil holde hjemmets interiør inspireret; Måler 70 x 70 x 17,53 tommer.

Air Flow Capacity	‎4435 Cubic Feet Per Minute
Assembled Diameter	‎70 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Hunter Fan Company
Brand	‎Hunter Fan Company
Collection Name	‎Stockbridge
Color	New Bronze finish
Color	‎New Bronze finish
Controller Type	‎Pull Chain Control
Customer Reviews	4.3 4.3 out of 5 stars 97 ratings 4.3 out of 5 stars
Cutting Diameter	‎70 Inches
Electric fan design	Ceiling Fan
Electric fan design	‎Ceiling Fan
Finish	‎Painted Cased White
Finish Type	‎Painted Cased White
Included Components	‎Motor, Blades, Light Kit, Light Bulb
Indoor/Outdoor Usage	‎Indoor
Is Discontinued By Manufacturer	‎No
Item model number	‎50472
Item Package Quantity	‎1
Item Weight	‎26.8 pounds
Item Weight	‎26.84 Pounds
Luminous Flux	‎1800 Lumen
Manufacturer	‎Hunter Fan
Material	‎Engineered Wood, Alloy Steel, Glass
Model Name	‎Stockbridge
Mounting Type	Downrod
Mounting Type	‎Downrod
Number of Blades	‎5
Number of Speeds	‎3
Part Number	‎50472
Power Source	AC
Power Source	‎AC
Product Dimensions	70"D x 70"W x 17.53"H
Product Dimensions	‎70 x 70 x 17.53 inches
Product Dimensions	‎70"D x 70"W x 17.53"H
Recommended Uses For Product	Lighting, Indoor, Home
Recommended Uses For Product	‎Lighting, Indoor, Home
Room Type	Living Room, Bedroom
Room Type	‎Living Room, Bedroom
Shape	‎Circular
Size	‎70
Special Feature	Corded
Special Feature	‎Corded
Special Features	‎Corded
Style	Traditional
Style	‎Traditional
Switch Style	‎Pull Chain
Type of Bulb	‎LED
Usage	‎Commercial, Personal, Residential, Business
Voltage	‎120 Volts
Warranty Description	‎Limited Lifetime Motor Warranty is backed by the only company with over 130 years in the fan business
Wattage	‎6.5 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Sean

Super quiet

I got this as a "Used - good" Amazon listing for less than $100 and I'm guessing it was a warehouse deal because the box came in chewed up and the fan was sparkling new in the plastic and undamaged, certainly never installed. It's a monster, so be prepared. The room we placed it in is 18'x20' and it fits the space well, but I wouldn't put it in a room any smaller. Install was straightforward; the ceiling bracket and the fan blades mount via rubber coupler to avoid metal to metal contact and it makes the fan unbelievably quiet. I'll be buying Hunter fans from now on.

Scritto da: John M. Pekarik

Basic fan, about what I expected, plan 2 hours to install

I purchased this fan for our master bedroom, which has about a 12 foot ceiling. I wanted something without a remote control because I have multiple wall switches and prefer to control the light and fan that way. The unit weighs about as much as I expected, though unlike most other ceiling fans I've purchased over the years, this fan comes with one-sided blades. The blades are also thicker than the other fans I have, though they're sturdy - I accidentally dropped one from 12' off the ground onto a hardwood floor, and there were no cracks or damage. It came with an installation bracket, as expected, but the ground wire attached to it is too short. I would recommend replacing it with a longer ground wire before installing the unit. The canopy cover is on the deeper side which means the fitting isn't as tight, but on the down side it makes wiring harder because it obstructs your view. (I was working mostly overhead due to the height of the ceiling.) Speaking of wiring, the instructions tell you to leave 8" of wiring after you trim it to size, but I would recommend 10" instead. The extra length was helpful to have when doing the wiring. The canopy cover has two small screws to keep it in place. These screws are tiny and are difficult to manipulate, and as I discovered the hard way, if you drop one while trying to get it screwed in, it will fall into the fan assembly. Installing the fan blades was a colossal pain because they are heavier than usual and will cause the fan assembly to tilt significantly when the weight is out of balance (i.e. you only have one blade installed). The design of the attachment also forces you to point the blade away from you when installing, because the lip of the blade arm is designed in such a way that you can't see what you're doing if you try to install it while it's facing you. This makes it harder to manage the fan blade and the screws. The final blade is very difficult to install because the fit between the other blades is very precise, and it's hard to get it seated correctly. Having a second person to help during this stage will make a big difference. The fan comes with three LED bulbs, standard shape, but they're only seven watts and are about 50% the size of a regular bulb. They cast an OK amount of light but a larger bulb would be better. I think there is enough room in the globe to fit three standard size bulbs but I haven't tried it yet. The globe is frosted glass...I'm not a huge fan of the pattern but it's OK. The light kit was really easy to attach. The fan is designed in a way that you thread both pull chains down through the bottom of the glass globe. That design is OK, but there is a clip that screws on below the globe, before the cap, and the pull chain tends to get caught and tangled in that clip as you're screwing it in. I got around that for the most part by holding the pull chain against the globe with my thumb while I was screwing the clip on. Putting the globe on was a big enough pain that I don't want to have to take it off again, but I think I can reach over it to get to the bulbs and remove/replace them later on without having to take the globe off. The fan itself is relatively quiet, though it wobbles at high speed. I need to see whether I just need to reorient the fan a bit in its mounting or whether it's a larger balance issue. It took me about two hours to install, in total.

Scritto da: Richard Altavista

Looks great

Its a hunter fan will all the quality and engineering you can expect, very happy with this item.

Scritto da: Imroxy84

Wrong blade color

The fan blades are completely different color than advertised and they are not reversible the other side is painted a grayish brown. There was no remote control. The glass has a paint splatter look not marbled like I thought. The fan does work great and it is quiet just wish the blades were darker wish I read the reviews before purchasing my old fan sounded like fireworks and started raining down fire so I had to find a replacement quickly.

Scritto da: Harry Balls

really good fan for the price

took about an hour to install. could have been faster but I like to take my time with electrical projects

Scritto da: Michelle

Picture item is not what was delivered.

Works great but blade color is medium oak unlike the picture in the description. The blades are also only one sided so there is no flipping them over to another color. The pictured item is a discontinued version of the current fan. I had to call Hunter Fan directly to figure our what is going on with this.

Scritto da: Jo

Easy to install, works great, looks amazing.

Took the old one down and installed this one in about 30 mins. It looks great in our room and puts out better air flow on medium speed than or old one on high. Comes with 3 LED bulbs, but we used our own LED bulbs and it throws out a lot of light.

Scritto da: andrew fitzpatrick

So out of balance.....

Had to buy a balanced kit...