Hillman 58528 rund trådlåsestift, 1/4 x 2, zink, 4 stk.

Brand:Hillman

3.7/5

kr
272.51

PRODUKTBESKRIVELSE Et udvalg af runde og firkantede trådlåsestiftvarianter fra The Hillman Group. Trådlåsestifter er en gaffelstift med en påsat trådløkke, der trækkes over enden af ​​stiften. Fuldt sortiment indeholder fem (5) refills bestående af Hillman varenumre #58528 - #58532. FRA PRODUCENTEN Disse rundsløjfede trådlåsestifter kombinerer fordelene ved en kombination af stift og split i en enkelt, pålidelig samling. De er speciallåsestifter og er gode til quick-release-applikationer ved blot at trække trådløkken over stiften for at låse den på plads. De kan bruges som en bekvem måde at justere eller fjerne tilbehør på udstyr.

Høj korrosionsbestandighed. Inkluderede varianter spænder fra 1/4 til 3/8 i diameter og 2 til 2-3/4 i længden. Indeholder runde og firkantede varianter. Låser nemt din pin på plads. Kvalitetsbefæstelser til en række forskellige hjemme- og kommercielle applikationer.
Assembled Diameter 0.25 Inches
Assembled Diameter ‎0.25 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Hillman
Certification ‎An
Color ‎Zinc
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 316 ratings 4.7 out of 5 stars
Cutting Diameter ‎0.25 Inches
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎58528
Item Package Quantity ‎1
Item Weight ‎4.2 ounces
Manufacturer ‎The Hillman Group
Material Alloy Steel
Material ‎Alloy Steel
Measurement System ‎Inch
Number Of Pieces ‎4
Part Number ‎58528
Pin type Locking Retainer
Product Dimensions ‎2.31 x 4.75 x 1.43 inches
Shape ‎Round
Size 1/4" x 2"
Size ‎1/4" x 2"
Special Features ‎Assortment

3.7

13 Review
5 Star
83
4 Star
8
3 Star
4
2 Star
3
1 Star
3

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Broc Riedner
Length improperly advertised.
The length advertised is the total rod length not captured length. I returned b/c too short.
Scritto da: Thomas Grimes
Works for Hobie AMA clip to hold the inflatable on!
This replaced a lost AMA flotation clib for my Hobie Kayak. Looks even better than the original at less than 1/4 the price!
Scritto da: Jason808
Works so perfectly for the DeWalt table saw/stand combo, it should be included!
This 4 pack works perfectly for the DeWalt 7480 table saw and stand. The stand comes with 8 sets of nuts/bolts/washers; use 4 for the lower legs and substitute these pins for the other 4 that are used to attach the saw to the folding stand. Makes it much more convenient to take down and set up, and it doesn't compromise the connection one bit. The locking hasp goes completely around the saw's tubular frame and locks onto the protruding pin for a secure fit. The angled design on the stand where it mates with the saw's frame makes it impossible for the saw to slip off forward or backwards, and the pins prevent it from sliding off left or right. Because the saw is advertised as portable, this should be included as standard equipment from DeWalt instead of the nuts and bolts. The lower leg parts of the stand can remain permanently bolted together, as it does not hinder the folding of the stand.
Scritto da: Rolidnot
Nice quality locking pin with a stiff spring
Good quality locking pin. I used these on my roof rake to replace the lame little push pins supplied by the roof rake manufacturer because we get real snow where I live. I got tired of fishing the roof rake head off the second story with my extension ladder so I bought the Hilllman locking pins, drilled a hole right through the roof rake handle and installed these pins. No problem since, even in 18 inches of wet snow on the roof. The Hillman locking pins have a stiff locking spring that won't come loose like the Koch 4021631 locking clip that I tried first which was a lame as the original roof rake push pins. Buy the Hillman, NOT the Koch locking pins!
Scritto da: Zoomers RV of Iowa
MISSING PART OF MY ORDER
PRODUCT IS FINE, BUT WE WERE TOLD THAT OUR FULL ORDER HAD ARRIVED, AND WE WERE MISSING 3 CLIPS. THE REST OF THE PRODUCTS WERE IN BOXES OF 4 EACH, AND THEN THERE WAS 1 CLIP JUST HANGING OUT ALL BY ITSELF, WITHOUT THE OTHER 3 CLIPS THAT WERE SUPPOSE TO COME WITH IT. IS THERE ANY WAY WE CAN GET THE LAST 3 CLIPS THAT WE ORDERED?
Scritto da: Gary Bisogna
Quick, effective, and easy assembly/disassembly
I purchased these imported round loop fasteners based on recommendations of other reviewers to have a quick-release way of attaching my DeWalt Table saw to its stand. The saw came with 4 nuts and bolts, but this fastener is much quicker to set up and take apart. I love them.
Scritto da: Steve Raabe
Works good
Great price
Scritto da: Kenny
Inflatible Pontoon Boat
I moved, I lost almost every locking pin for my pontoon boat frames. I looked everywhere and found these and they work great. No I can assemble my frames and go floating and fishing this spring.
Scritto da: KT
Perfect little clips.
I used these to take my boat lift wheels in and off. Much easier than cotter pins.
Scritto da: Ronald
Works great for what I need them for
Strong work well would buy again
Scritto da: mario sivret
quick lock pin
works like a charm
Scritto da: Amazon Customer
Exactly as described!
Delivered quickly. Product as described.
Scritto da: Rick
Works
Good product

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array