Foot Master GDR-60-F-NYN Nivelleringshjul, 50 mm Nylon 66 hjul, ikonisk elfenben, højdejusterbar skralde, plademonteret drejehjul, 250 kg belastningsevne

Brand:FOOTMASTER

3.3/5

kr
676.14

FOOT MASTER-ingeniører opfandt det ORIGINALE nivelleringshjul i 1989 og satte standarden for ydeevne og holdbarhed. Dette geniale produkt kombinerer et hjuls mobilitet, højdejusterbarheden af ​​et niveaubeslag og stabiliteten af ​​en trædepude. GDR-seriens nivelleringshjulsprofil er integreret i dens funktion. En tyk aluminiumsramme bruges til at opnå kombinationen af ​​at være både stærk og kompakt. GDR-60-F-NYN er normeret til 250 kg med en samlet højde på 82 mm. Op til 10 mm højdejusteringsevne er tilgængelig for et nøjagtigt niveausæt. GDR-60-F-NYN er monteret med en 73 mm x 73 mm topplade (58 mm x 58 mm bolthulsmønster) ved hjælp af 4 bolte og møtrikker (INFLUDERET). Den drejelige sektion indeholder 2 sæt kuglelejer for nem manøvredygtighed. Lejeløbehylstre lavet af hærdet stål forhindrer skuring til aluminiumsrammen, hvilket fører til høj ydeevne og pålidelig pålidelighed. Flytning er let takket være et hjul med en diameter på 50 mm, der er parret med en akselaksel lavet af koldsmedet stål. Og når det først er placeret, giver hjulet adgang bagtil til et udtrækkeligt skraldehåndtag, der bruges til at sænke trædepuden. Når hjulet løftes fra jorden, tager trædepuden over for at gøre påføringen helt stationær. Det er hurtigt og effektivt at foretage justeringerne for at opnå det perfekte niveausæt ved hjælp af det integrerede skraldesystem. Når det er tid til at bevæge sig igen, hæver du blot trædepuden for at genoprette bevægelsesfriheden.

EAN: 0840955100888

Kategorier Industri og videnskab, Material Handling Products, Casters, ,

Nylon 66 (D70) hjul har enestående dimensionsstabilitet og trækstyrke. Udtrækkelig skralde integreret for hurtigt og bekvemt at justere højden. Lejehylstre af hærdet stål forhindrer skuring. To sæt kuglelejer i den drejelige sektion for nem manøvredygtighed. Patenteret støbt aluminiumsramme opnår en generøs vægtkapacitet.
Brand FOOTMASTER
Color Iconic Ivory
Country of Origin Korea, Republic of
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number GDR-60-F-NYN
Manufacturer G-DOK Industries
Material Nylon, Aluminum, Steel
Mounting Type Surface
Product Dimensions 4 x 3.75 x 3.23 inches; 1.72 Pounds
Unit Count 1.0 Count

3.3

8 Review
5 Star
59
4 Star
13
3 Star
27
2 Star
0
1 Star
0

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Amazon Customer
Ya only get one caster
This is one hell of a caster. With that said, these are made in Korea and the Chinese knock offs are almost as good and you get four for less than the price of one of these. I sent it back and went with the made in China ones. Not unhappy...
Scritto da: Murray Irwin
Brilliant casters
Sturdy, easy to adjust height, and blocks very firm on the floor, but rolls easily when needed. Downside is price - you are getting quality and you are paying for it too.
Scritto da: A. Martin
Well worth the money!
I initally thought these were expensive for what they were, but upon receiving them, I can now see why. The frame of this caster is a well-designed solid casting. The wheels are small, but they have no problem rolling around with these being mounted to the legs of our pool table. Our home is small, and we wanted to be able to move the pool table when needed to make room for other activities in the room. Our table is a slate table with solid wood frame. When the casters are set to roller mode, the table is moved with ease, even with just one person. So far, the wheels have not gotten flat spots or froze up on the axles. The ratcheting mechanism is easy to operate and only takes a few turns to lift the pool table onto the rubber feet and back. I wish I had known about these things sooner! Would highly recommend these to anyone wanting to mobilize heavy objects!
Scritto da: Kjell Are Refsvik
Wow....
I did not know a product like this excisted, but it does, and it works fully as advertised. I used it to create a feet underneath a 19" rack made of oak for my home office, and it has been wonderful to both be able to move it around when needed, as well as level it perfectly when it found its place. Top marks for these, even if they were a bit expensive.
Scritto da: SLRW
Great Product
These are the best casters for heavyweight applications. I installed six casters on a 6' x 12' center island workshop cabinet table . Weighing in at over one-thousand pounds when fully loaded with tools and woodworking supplies, the island still rolls easily on the concrete shop floor. Once the pads are lowered to floor, the ratcheting action allows me to level and stabilize the entire island for use as a run-out table for all the shop tools. Great product. I'm now purchasing more to install on my heavyweight shop tools (planer, joiner, table saw, etc.) to maximize tool mobility and increase shop functionality. I highly recommend this product to others who have a frequent need to move heavy loads that must remain stationary once relocated. Not cheap, but well worth the $$
Scritto da: chris
Well made for the price.
I hardly ever go out of my way to review a product, however, this one deserves it. I installed these for an 800 pound slate pool table that I wanted to move around easily, work great! Levels so that I lean on the table from time to time without movement when sitting on rubber bumpers. Wheels move very easily, came with no screws. The levers have a ring that have bent rather easy but doesn't effect the performance of the casters. Well made.
Scritto da: cheri b.
Built like the Great Wall of China: to last!
You can feel the weighty quality of these as soon as you pick them up. I returned a lesser set and got these instead. Not cheap but a sturdy, well-engineered component worth price if you need something that can handle serious workloads (I use mine on the base of a honey extractor that sees a lot of weight and vibration)..
Scritto da: I. Cortes
Makes moving a 300lb bench like buttah! The ratchet mechanism is very cool
I thought this might not serve my needs but was totally wrong. I made a large workbench and was going to use traditional casters but since I needed a stable platform to route, sand and finish wood projects. I needed the stability of a rubber pad yet the mobility in a limited space. Makes moving a 300lb bench like buttah! The ratchet mechanism is very cool! I think if I ever have large heavy benches that need to be moved frequently these are a no brainer.

Relaterede produkter

hot
BAL 29041B Heavy-Duty drejeligt hjul
3.5/5

kr 592.29

BAL 29041B Heavy-Duty drejeligt hjul
3.5/5

kr 592.29

hot
Atosa B0604401 2 med O bremsehjul
4.1/5

kr 830.13

Atosa B0604401 2 med O bremsehjul
4.1/5

kr 830.13

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array