Enerlites MPC-52V PIR Loftssensor, Loftbelægningssensor, Loftslyssensor, Belægningssensor, Kommerciel Grade 360 Degree FOV, 800 Sq. Ft Dækning, 120-277VAC, Hvid

Name: Enerlites MPC-52V PIR Loftssensor, Loftbelægningssensor, Loftslyssensor, Belægningssensor, Kommerciel Grade 360 Degree FOV, 800 Sq. Ft Dækning, 120-277VAC, Hvid
Brand: ENERLITES
SKU: 0883951414733
Price: 528.74 DKK
Availability: InStock

Brand:ENERLITES

3.2/5

kr
528.74

Kommerciel 360 graders passiv infrarød loftmonteret belægningssensor med bevægelsesdetektion. Loftsensorkontakten tænder/slukker automatisk lyset, når der registreres bevægelse. Spar penge på energiregningen ved at installere Enerlites MPC-52V, da installationstiden reduceres fra 45 minutter ned til 10 minutter. Der kræves ingen loftboks til dette produkt. Indeholder to frie linser, herunder en til tættere rækkevidde, der er mere følsom over for bevægelse, og en til længere rækkevidde med mindre følsomhed. For at installere denne tilstedeværelsessensor loftlampe skal du blot bore et hul i loftet med din skruetrækker, indsætte bagpladen i hullet, derefter føre ledningerne igennem og tilslutte. Den loftmonterede lampe er ideel til erhvervsmæssig eller kommerciel brug med henblik på bekvemmelighed, energieffektivitet, sikkerhed og overvågning. Tilpasning: • Justerbar tidsforsinkelse: 15 sek. - 30 min. • Følsomhedsjustering: 50% / 100% Specifikationer: • Multi-level, 360° Fresnel linse for overlegen belægningsdetektion • Dækning: 360° synsfelt; 800 sq.ft dækning • Driftstemperatur: 32° til 131°F (0° til 55°C) • Glødelampe 800W @ 120VAC, 60 HZ • Fluorescerende 800VA 277VAC, 60 HZ • Motor: 1/4 VAC, 600 HZ HZ • Ledningsbetegnelse: Hot, Neutral, Load • Passiv infrarød teknologi, PIR-bevægelsessensorkontakt • Styrer glødelamper, CFL og LED-belysning. • UL-listet

Beløb

Tilføj til kurv Køb nu

EAN: 0883951414733

Kategorier Værktøj og boligforbedring, Electrical, Switches og dimmere, Vægafbrydere, Motion- Aktiverede afbrydere,

Belægningssensor loftmontering er UL-listet, glødende: 400W @120VAC; Fluorescerende: 800VA @120VAC, 1200VA @277VAC; Motor: 1/4 HK @120VAC. Driftstemperatur (32 – 131°F), Ingen loftboks er nødvendig. Fresnel-linser med flere niveauer: Loftsensoren inkluderer to udskiftelige linser til forskellige følsomhedsniveauer. Tilpas for de bedste resultater. Fuldt 360° synsfelt Fresnel-objektiv, der dækker op til 800 sq. Ft. Designet til loftshøjde på omkring 8-10 fod. Kommerciel kvalitet, ideel til virksomheder og erhvervsejendomme. Loftbevægelsessensor kan fastgøres direkte til armaturet eller loftet for nem installation. Du skal blot punktere et hul i loftet og derefter føre ledningerne igennem, hvilket reducerer installationstiden med 30 minutter. Loftmonteret belægningssensor bruger passiv infrarød (pir) teknologi til automatisk at tænde lys.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	ENERLITES
Brand	‎ENERLITES
Certification	‎UL
Color	White
Color	‎White
Customer Reviews	4.2 4.2 out of 5 stars 76 ratings 4.2 out of 5 stars
Included Components	‎MPC-52V
Is Discontinued By Manufacturer	‎No
Item model number	‎MPC-52V
Item Package Quantity	‎1
Item Weight	0.01 Ounces
Item Weight	‎0.01 Ounces
Manufacturer	‎Top Greener Inc
Maximum Range	10 Feet
Maximum Range	‎10 Feet
Mounting Type	‎Ceiling Mount
Part Number	‎MPC-52V
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎5.1 x 4.3 x 4.4 inches
Switch Style	‎Temperature Switch
Wattage	‎400 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Circle C

Great Instructions

What impressed me the most was the completeness of the instructions and each wire was clearly marked in layman's terms. I also like that you don't have cut a 4" hole to install it. The unit has three main components. The base, the sensor and electronics, and the cover. I plan on ordering another one for my office which has the wall switch inconveniently placed behind one of the French doors making a switch mounted sensor unusable.

Scritto da: Casual Reviewer

Watch out for the lenses in the box

I installed it in a room with an 8ft ceiling and I had to walk almost directly below it for it to work. UPDATE after a couple hours of research.... Frustrated at the prospect of returning a device I just bought and installed, I began reading about passive infrared technology on my phone in the dark room I was trying to automatically light up. In my research I found an article mentioning how a fresnel lens (the jewel shaped lens on the cover) helps with the sensitivity of the devise because it divides the field of view into zones that the detector can monitor. I then remembered seeing when I unpacked the box, a spare lens inside and thought it odd for them so supply one. To try my luck, I took the lens that was mounted on the cover and compared it to the spare one and to my amazement saw that the interior face of the spare lens was much more textured. To try my luck I swapped them out and all my problems went away. The instructions do not make any mention of this so I am not sure if they indeed supply lenses with two sensitivities or whether one was defective. I give it 5 stars for working as advertised minus 1 for either poor documentation or providing defective lenses.

Scritto da: Robert L Klawuhn

Easy to install and works well.

It seems to be very sensitive. Maybe too much sensitivity for a small porch, even at the low setting. But it works great and was simple to install.

Scritto da: A. Adams

Failed in less than one week of actual use

Update: Failed just one day after my return window closed. At around 2AM in the morning it started turning on and off repeatedly without any trigger. One day later fails to register any motion. Will now have to follow up on the two year warranty but i'm not holding my breath... Typical passive infrared (PIR) occupancy sensor that is easy to set up and wire. Adjustable time settings are 15 seconds, 5 minutes, 10 minutes, 20 minutes, and 30 minutes. Really wish they had 1 minute as 15 seconds is too short and 5 minutes is much too long. Didn't test the ambient light settings that much (cool feature that won't turn on the lights if the sensor detects enough ambient light). Did change the sensitivity down to 50% (either 50 or 100% sensitivity). The kit included another lens and some pie shaped stickers so that you could 'blind' the sensor to certain unwanted triggers (IE sunlight, window, adjacent space, heater vent, etc). The wiring has a black (hot) neutral (white) and red that goes to the load. Underneath the cover they have two screw holes or you can use the threaded nut connection and washer to affix the stem on the backside through a material such as drywall or plywood. Conveniently the stem also has some thread for 1/2" flexible conduit so no adapter would be needed just in case the application required conduit. Literature lists a two-year warranty. Using this sensor in a walk-in closet for hands free activation and no worry automatic shut off.

Scritto da: Amazon User

Easy install.

So far so good. Turns on when you expect. I use it for a closet and the range is perfect. It has multiple time and light settings. Also includes tape pieces to mask from detecting unnecessary movment. I bought it because I could mount it without requiring additional install of junction box. Keep in mind you still need access to ceiling to tighten nut that holds it against drywall. So don't place too far from light fixture. Looks nice and clean.

Scritto da: Jeff

Excellent solution for ceiling sensor

This ceiling mounted infrared motion sensor works as described and is well made. Although it appears to be designed for suspended ceiling applications, I was able to install this in an existing sheetrock ceiling to control a ceiling fixture in a hallway. I used an old work ceiling box and a cover plate because the size of this sensor did not match with any old work box that I could find readily. This unit has been performing flawlessly for several weeks now. UL listing is a plus.

Scritto da: Fab.

works ok

But needs adjustment, change of the cap head depending of your configuration otherwise you need to be right under for it get triggered.

Scritto da: ronald rorick

works great

i use it for a bathroom and its work great

Scritto da: Cam Summerfeldt

Not a direct fit for standard ceiling boxes.

Great operation but not typical mounting style or size. Extra trim pieces will need to be made or purchased.