Enbrighten Z-Wave Smart Toggle Light Switch med QuickFit og SimpleWire, 3-vejs klar, kompatibel med Google Assistant, ZWave Hub påkrævet, Repeater/Range Extender, Hvid, 46202 1 Pakke Toggle Switch Hvid 1-pak

Brand:Enbrighten

3.6/5

kr
494.16

Hjemmeautomatisering er endnu smartere med Enbrighten Z-Wave In-Wall Smart Switch med QuickFit og SimpleWire. Når den er parret med en kompatibel hub, betjener den fastkablede smarte switch væg-, loft- og accentbelysning gennem individuelle kommandoer og programmerede indstillinger. Styr og planlæg trådløst indendørs eller udendørs armaturer for ubesværet styring af dit hjem. Dine automatiseringsmuligheder er tilsyneladende uendelige, når de er forbundet til hubs fra Ring, Wink, SmartThings, Home Seer, Vera, Nexia og mere.

Ingen tilgængelige enheder
Rækkeviddeforlænger – Z-Wave-kontakten i væggen gentager signalet fra din hub eller anden Z-Wave-enhed for at udvide den trådløse rækkevidde med op til 150 fod. Multi-switch-kompatibel – Smart-enheden fungerer perfekt alene eller integreres problemfrit i multi-switch-opsætninger, når den er parret med add-on-kontakter (model 46200). Op til fire ekstra kontakter kan tilsluttes samme lys, ventilator eller apparat. Switch-opgradering - Udskift nemt enhver standard-i-væg-afbryder udstyret med en neutral ledning for at fjerntænde/slukke og oprette tidsplaner for en bred vifte af armaturer. Stemmestyring – Nyd bekvemmeligheden ved stemmestyring med Google Assistant eller Amazon Alexa, når du er tilsluttet via en kompatibel Z-Wave-hub. Valgfrit vippeguidelys – Den hvide vippekontakt lyser for at vise kontaktens placering og status. En blå LED-baggrundsbelysning giver en blød glød og kan vendes, slukkes eller altid tændes baseret på dine indikatorpræferencer. OVERAGE – Z-Wave Plus fungerer med alle tidligere Z-Wave-generationer for at tillade fortsat udvidelse af dit hjemmeautomatiseringsnetværk. Switchen er i stand til at styre indendørs eller udendørs armaturer til automatisering af hele hjemmet og gentager dit Z-Wave-signal fra din hub eller andre enheder for at udvide din rækkevidde med op til 150 fod. Udvidet signalområde øger din hjemmeautomatiseringsdækning for at forbedre din kontrol. SimpleWire – Patenteret auto-detekterende linje-/belastningsterminaler understøtter hurtig installation ved at identificere linje- og belastningsledninger og konfigurere switchen i overensstemmelse hermed. Dobbelte jordporte, som er forskudt for at undgå monteringsskruer for omskifterboks, understøtter daisy-chaining i multi-switch-opsætninger. QuickFit – Forbedrede komponenter reducerede husets dybde med op til 20 % sammenlignet med tidligere Z-Wave-modeller og eliminerede behovet for varmetapper. QuickFit-forbedringer er den ideelle smarte løsning til omskifterbokse i ældre stil, flergruppekonfigurationer eller enhver anden applikation med begrænset plads. Revolutionerende design – QuickFit- og SimpleWire-teknologier tilbyder banebrydende hjemmeautomatiseringsfunktioner. Unikke fremskridt gør de smarte kontroller nemmere at installere og mere pålidelige end nogensinde før.
Brand Enbrighten
Circuit Type 3-way
Connector Type Clamp
Contact Type Normally Open
Country of Origin China
Current Rating 15 Amps
Item Dimensions LxWxH 1.13 x 1.75 x 4.13 inches
Item model number 46202
Manufacturer Jasco Products Company, LLC
Operating Voltage 120 Volts
Operation Mode ON-OFF-ON
Product Dimensions 1.13 x 1.75 x 4.13 inches; 5.29 Ounces
Switch Type Toggle
Terminal Spdt

3.6

10 Review
5 Star
76
4 Star
14
3 Star
4
2 Star
2
1 Star
5

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Amazon Customer
Worked immediately with even 800 series home automation hub. Wish it was physically more solid.
As stated. Also shipped fast. Only complaint is if you back out the ground screw, you might as well throw it out (didn't try other screws out of this fear so be careful), it'll never thread back in (yes instructions say don't do that but I've never seen a switch this physically fragile). Not worth returning one of them over this, so while software worked instantly (which is huge in the z-wave space), the physical build quality is 'flimsy' until you get it screwed into the wall. It's not a standard wall switch, it's a piece of china that you throw out the moment you chip it but when it works it's great.
Scritto da: Retired Computer Tech
Works fine, adoption was troublesome
Had a difficult time adopting this switch into my system. Once it did it works fine. I have over 2 dozen devices in my systems so I am not a rookie at adopting.
Scritto da: Hugh W. Cox
new and improved
I've reviewed these switches and their sister products a number of times since they first came out. These are awesome. These are the next logical step once you realize that smart light bulbs are very stupid once you turn off the light switch. As for the use of these switches, I love them. I have around 40 of these installed. Some are the fan switches, some are dimmers, some are regular switches. Most are paddle switches, but some are the traditional switch. This earlier versions of this suffered from a couple of problems they have resolved with these. 1. The earlier ones took up an entire switch blank in a box all the way to the back just about. There just wasn't enough room left in the box for wiring after you put one of these in and don't even try it with a quad box. These are probably about 3/4 of an inch thinner front to back which leaves more room for the actual wires. 2. The earlier version cared which wires you connected to which port on the back of the switch. This still cares about the ground, neutral, and traveler wire ( if you are using in a 3 way circuit ). But as far as the load and the line wires, it doesn't seem to care. This makes it easier if you don't have a tester to tell you which one is which. But seriously you need a tester so you know which wires you are dealing with, it's only safety you are talking about. 3. The old version had led lights on the paddle switches, but not on the toggle switches. The LED's are still in the bottom corner of the paddle switches, but now the actual switch on the toggle switches lights up. You can still configure it to turn that little light on when the light is on, off, or disable it. All in all I like the changes they made. The earlier versions were prone to failing in my house. It could be my house wiring since it was the same switches that seemed to fail. But over a 2 year period, I probably replaced 5 to 10 of my roughly 40 switches. I'm hoping these are more robust. Smart switches and a smart house, costs a lot and replacing things like a switch, can be costly. But these are an awesome first step into a smart house.
Scritto da: Nick Smith
Great S2 Authentication and long press
Unlike some other persons post. This does work with S2 authentication and it stays on it. It also allows for quick and long clicks to turn off and on devices. Only one event for on and one event for off though. As for the install is is your simple. Easiest instructions I’ve seen for a 3 way switch. Other switches have bad manuals. It was super simple to set up this switch into home assistant with the QR code to scan on the box and the switch itself on the front plate. I bought just one for a bathroom fan to turn on with a humidity sensor. I only have one use for this style of switch. If I ever need another in my automation; this will be purchased in the future.
Scritto da: oreosmeow
A little "delicate" with power outages
I have a whole bunch of these in my house and have had them for over 5 years. I say they're "delicate" because power failures can blow them out. I've replaced the one in the garage twice, and the latest outage blew out the one in my master closet. Also, sometimes I have to "repair" the z- wave network for my Smartthings hub to "see" them again after an outage. That said, I find them easy to install, connect to my hub and, until I have another outage, they work flawlessly. And these are the only z-wave toggle switches out there, that I've found.
Scritto da: n/a
Dope
Nice to walk in my kitchen and lights turn on automatically as well as my bathroom fan turning on when humidity rises too high.
Scritto da: Scott S
An Improved replacement for a "zapped" earlier version
A recent power outage took out my three year old, or so, earlier version of this switch. Nuts! It failed safely. I immediately ordered a replacement, which was a newer version. I was able to install it quickly after it arrived. Things I like about the newer version: - The height, width and depth are all reduced, making it easier to "stuff" everything into the electrical box to complete the install. - No need to figure out which is the "hot" wire and which is the "load" wire . . . it allows you to connect either wire to either of two terminals, but as stated, NOT to the "traveler" wire connection screw (optionally used for a multi-switch install). - The switch handle now has an added blue LED built in that you can set up to work in a couple of ways or just leave it off. It makes it easier to confirm the switch/light is on in situations were it isn't easy to see from the vicinity of the switch. Nice! Now . . . my hope is that this switch may be a bit more robust when it comes to future power outages or glitches!
Scritto da: jmj
Easy to Install, Easy to Connect - Update
I'm going to knock the switch down from 5 to 4 stars. The manufacturer should make it clear in the description: when installing in a 3-way switch configuration you need a second add-on switch. These will not operate properly without the add on switch. It was easy to install and connect, after I worked out one issue. There are two black screws marked "load/line" and the directions suggest it doesn't matter which you use for the load and which you use for line, but it does. After following the directions, I could turn the light on and off manually, but I couldn't connect the switch to ADT Pulse and the switch wouldn't cycle through the glow options. Because the light functioned, I assumed the switch was installed correctly. After 1hr trying to get someone at ADT to help (I couldn't), I switched the load and line wires. That worked. I gave this only four stars because they need to update the directions.
Scritto da: Totally original name
THEY SUCK Smart switches don’t support Z-Wave Plus encryption
These switches might join using Z-Wave plus encryption, but then quickly fail and default to no encryption. This is a problem because they won’t act as a signal repeater for any device that does use encryption. Also the switches do not support a “long press” through Z-wave. But worse than that! These switches HAVE to be clicked, if you flipped the switch up and held it (expecting the lights to come up) they will completely IGNORE your request. Instantly causing your brain to go UP-DOWN-UP, but unless you ONLY click the switch ONCE in ONE direction, it will still IGNORE your input and not turn on the light. You have to click the switch either up or down, and only do one quick click! (Anyone who isn’t used to these switches struggles with this)
Scritto da: Salvador E Landin`
Excelente producto
Opera muy bien y fácil de instalar

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array