0
0

Total:kr 0.00

Se vognCheckout
LoginRegister
0

Total:kr 0.00

Se vognCheckout
LoginRegister

Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Fungerer med Alexa, Google Assistant, SmartThings, Wink, Zwave Hub påkrævet, Repeater/Range Extender, 3-vejs kompatibel, 26933

Brand:Enbrighten

3.2/5

kr
884.32

Sæt hjemmeautomatisering i gang med Enbrighten Z-Wave In-Wall Smart Motion Dimmer. Når den er parret med en kompatibel hub, betjener den fastkablede smarte lysdæmper loftslamper, vægarmaturer og mere gennem individuelle kommandoer og programmerede indstillinger. Styr og planlæg trådløst indendørs eller udendørs armaturer for ubesværet styring af dit hjem. Dine automatiseringsmuligheder er tilsyneladende uendelige, når de er forbundet til hubs fra Wink, SmartThings, Home Seer, Vera, Nexia og flere.

Beløb
Tilføj til kurvKøb nu

EAN: 0030878269339

Kategorier Værktøj og boligforbedring, Electrical, Switches og dimmere, Vægafbrydere, Dæmperafbrydere,

LET INSTALLATION – Kræver indendørs in-væg installation med faste tilslutninger. NEUTRAL LEDNING PÅKRÆVET. Inkluderer hvide og lyse mandelknapper (vægplade medfølger ikke). Komplet dæmpningsevne til brug med dæmpbare LED'er og CFL'er samt gløde- og halogenpærer. Understøttet watt - 600W glødelampe; 150W LED/CFL. Understøttet spænding – 120VAC. Driftstemperaturområde 32-104 grader Fahrenheit. FULD HJEMMEDÆKNING – Z-Wave Plus fungerer med alle tidligere Z-Wave-generationer for at tillade fortsat udvidelse af dit hjemmeautomatiseringsnetværk. Lysdæmperen er i stand til at styre indendørs eller udendørs armaturer til automatisering af hele hjemmet og gentager dit Z-Wave-signal fra din hub eller andre enheder for at udvide din rækkevidde med op til 150 fod. Udvidet signalområde øger din hjemmeautomatiseringsdækning for at forbedre din kontrol. 3-VEJS KLAR – Smart-enheden fungerer perfekt alene eller integreres problemfrit i multi-switch-opsætninger med nødvendige add-on-switche – modellerne 12723 eller 46199. Op til fire add-on-switche kan tilsluttes den samme enhed. SELECT MOTION CONTROL – Lysdæmperen justerer lysstyrkeniveauerne for dæmpbare LED-, CFL-, gløde- og halogenlys fra 0-100 procent for at reducere energiomkostningerne og forbedre pærens levetid. Tilpas lysdæmperen med tre muligheder for bevægelsesdetektering – belægning, ledighed og manuel. Belægningstilstand tænder/slukker lys automatisk, mens lys tændes manuelt og slukkes automatisk i ledighedsindstillingen. Vælg manuel betjening for at deaktivere bevægelsessensoren. Med fem time-out-varighedsmuligheder, der spænder fra fem sekunder til 30 minutter og op til 180-graders detektionsdækning, kan lysdæmperen rumme ethvert rum med varierende mængder af aktivitet. Nyd desuden tilpassede scener, alsidig planlægning og praktiske advarsler med fjernbetjening og stemmestyring, når du er tilsluttet en kompatibel hub. STEMMESTYRING – ALEXA & GOOGLE ASSISTENT KOMPATIBEL (kræver en Z-Wave certificeret hub). Fungerer med følgende Z-Wave certificerede hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera og mere.
Actuator Type Push Button
Actuator Type ‎Push Button
Batteries Included? ‎No
Batteries Required? ‎No
Brand Enbrighten
Brand ‎Enbrighten
Circuit Type 3-way
Circuit Type ‎3-way
Color ‎White & Light Almond
Connectivity Protocol ‎Wi-Fi, Z-Wave
Control Method ‎Voice
Controller Type ‎Nexia, Vera, Google Assistant, Amazon Alexa, SmartThings
Country of Origin ‎China
Customer Reviews 4.1 4.1 out of 5 stars 178 ratings 4.1 out of 5 stars
Included Components ‎1 In-Wall Sensor
International Protection Rating IP00
International Protection Rating ‎IP00
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1.5 x 1.5 x 3 inches
Item Dimensions LxWxH ‎1.5 x 1.5 x 3 inches
Item model number ‎26933
Item Package Quantity ‎1
Item Weight ‎7 ounces
Manufacturer ‎Jasco Products Company, LLC
Mechanical Life Expectancy ‎2 years
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Number of Items ‎1
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Operation Mode ON-OFF
Operation Mode ‎ON-OFF
Part Number ‎26933
Product Dimensions ‎1.5 x 1.5 x 3 inches
Size ‎Dimmer
Style ‎Motion Dimmer
Switch Style Motion Dimmer
Switch Style ‎Motion Dimmer
Terminal Spdt
Terminal ‎Spdt
Unit Count ‎1.0 Count
Upper Temperature Rating ‎40 Degrees Celsius
Warranty Description ‎2-Year Limited Warranty
Wattage ‎600 watts

3.2

4 Review
5 Star
59
4 Star
20
3 Star
6
2 Star
4
1 Star
10

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Corey
Works well, a bit pricey
The product itself works great. I am using one for my guest bathroom and laundry room. I think the price is a bit high for what you get but there are not a lot of comparable zwave in wall switch/motion sensors. Having the motion sensor built into the switch eliminates the need for a battery or usb cable. Of course, your switch has to be located such that the field of view will detect the traffic like you want. I did have a slight issue getting the switch plate to fit over the switch. The buttons wouldn’t move freely. I just used some sandpaper to make the opening slightly larger and I was in good shape.
Scritto da: Scott Reston
Great switch for half-bath, good Home Assistant support
Installed this in my half-bath and have it connected to Home Assistant via Zwave-JS. It's working great so far. You can configure the light to stay on up to 30 minutes after motion. The motion sensor in Home Assistant reports "OFF" in about 25 seconds. I put a contact sensor on the bathroom door and set up a template sensor that's "on" when there's motion from the switch sensor or the door is closed. I have Home Assistant turn off the light when that sensor goes "off". So in practice, if you close the door, the light will stay on for you whether you move around enough to keep the motion sensor happy. But if the door is open, the light'll turn off after about 25 seconds with no motion. This works great for us as you can see the reflection of the bath light on our living room TV.
Scritto da: RAF
Got to know what you are doing :)
I have about a dozen of these in my new home and they are working great. But unlike more most reviewers I use Hubitat and not Wink or Smartthings. Hubitat allows controlling the advance features of this device and also does not use an internet connection to a remote Wink or Smartthings server. I have my switches setup in "Automatic" mode and when the light turns on Hubitat switches the mode to manual. This allows me to control the switch in a more sophisticated way. For example, in our master bathroom with the switch in automatic mode you walk into the room and the lights turn on immediately. But leaving the switch in automatic mode is a problem when we go into our walk in shower and are out of view, after X number of minutes the lights would turn off. The solution was to put a motion sensor in the shower (it has a high ceiling and stays dry). By creating a Hubitat rule and switching the dimmer to manual mode once the lights are turned on and using motion seen by either motion sensor, the shower or GE dimmer, Hubitat keeps the lights on in the bathroom. The shower motion sensor has another rule to turn on the shower lights and fan (another GE Z-Wave Switch).. The combination of Automatic and Manual modes and the Hubitat controller has been a very useful technique in automating my home lighting. Hubitat also controls the dimmer settings used throughout the day and night and I've seen no issues. It's nice to walk into the bathroom late at night or early morning and now be blinded with very bright lights!
Scritto da: Pierce Thomas
Works well, would recomend if a motion switch is needed.
I recently took the leap into starting my smart home. I purchased a few switches and thought I would leave a review that other might find helpful as a first-time setup. Below are a few details about my current configuration with the GE 26933 Motion Switch. Setup: I am using 4 of the Cree 9.5W Dimmable LEDs Cree 65W Equivalent Soft White (2700K) 9.5W BR30 9W Dimmable LED Flood Light Bulb (4-Pack) For a total load of about 47.5w on the switch. One note about the bulbs (not necessarily about the switch) is the fact that there is a slight buzzing noise, but only while in a dimmed state. PRO: • Smooth Dimming • Silent operation (no noise turning on or off) • 4x configurable associations • Motion sensing • Never worry about turn off (if you have the motion sensing activated, you never have to worry about shutting the switch off.) CONS: • Very large body (This switch takes up a lot of space in the junction box, make sure you have enough room) • No settable minimum brightness (some of the Lutron switches have a configurable minimum for LEDs) • Minimum brightness is not the same as other GE Z-Wave switches such as the GE 14294. Minimum on the GE 26933 is roughly what 30% would be on the GE 14294. The GE 14294 will go completely dark if dimmed all the way and will appear “off”. • If the switch is turned on by motion, it never appears to turn off in the Hub. It is as if the switch “dims” to 0% (not a big deal, but it does show the Hub that it is on) • I had difficulties trying to change the motion settings using the buttons as the manual describes. • No supplied cover. The Lutron screw less cover “White” matches the switch perfectly.Lutron Claro Single-gang Wallplate - Parent All in all I do really enjoy this switch, there are a few quarks to get around, but the motion sensing works very well. I have this switch installed next to stairs and it lets me know when someone is coming up. It has an automatic time out that is “configurable”, but I have yet to get it to change from the default of 5min. The color of this switch and other

Relaterede produkter

hot
Lutron Toggler LED+ lysdæmper
3.6/5

kr 408.50

Lutron Toggler LED+ lysdæmper
3.6/5

kr 408.50

hot
P&S Legrand Radiant Dimmer lyskontakt med vægplade til 450W dæmpbar CFL & LED-lys - 700W glødelampe og halogen - hvid (RHCL453PWPW) Hvid med vægpladelyskontakt
3.6/5

kr 526.97

P&S Legrand Radiant Dimmer lyskontakt med vægplade til 450W dæmpbar CFL & LED-lys - 700W glødelampe og halogen - hvid (RHCL453PWPW) Hvid med vægpladelyskontakt
3.6/5

kr 526.97

hot
Eaton DLC03P-W 300 Watt Dæmpbar LED/Kompakt Fluorescerende/600 Watt Glødelampe/Halogen Decorator Lysdæmper med Preset, Hvid
3/5

kr 562.83

Eaton DLC03P-W 300 Watt Dæmpbar LED/Kompakt Fluorescerende/600 Watt Glødelampe/Halogen Decorator Lysdæmper med Preset, Hvid
3/5

kr 562.83

hot
Legrand strålende natlys, 3-vejs 15 Amp Decorator Rocker NightLight Switch til entre eller børneværelser, dekorationsvægplade, afbrydere Børstet nikkel, NTL873NICC6
3.4/5

kr 446.63

Legrand strålende natlys, 3-vejs 15 Amp Decorator Rocker NightLight Switch til entre eller børneværelser, dekorationsvægplade, afbrydere Børstet nikkel, NTL873NICC6
3.4/5

kr 446.63

hot
Leviton 6604-2 600W glødelysdæmper, enkeltpolet, plastik, frie ender strippet 3/4-tommer
3.6/5

kr 436.98

Leviton 6604-2 600W glødelysdæmper, enkeltpolet, plastik, frie ender strippet 3/4-tommer
3.6/5

kr 436.98

hot
Eaton RDC25-W-K 2,5-Ap enkeltpolet kombination stille 3-hastigheds blæserkontrol og 300-watt lysdæmper, hvid
3.3/5

kr 310.33

Eaton RDC25-W-K 2,5-Ap enkeltpolet kombination stille 3-hastigheds blæserkontrol og 300-watt lysdæmper, hvid
3.3/5

kr 310.33

hot
Leviton RE00R-WB Renu koordinerende lysdæmper fjernbetjening til 3-vejs eller multi-placering kontrol, til brug med REI06, i valnøddebark
0.1/5

kr 450.94

Leviton RE00R-WB Renu koordinerende lysdæmper fjernbetjening til 3-vejs eller multi-placering kontrol, til brug med REI06, i valnøddebark
0.1/5

kr 450.94

hot
Lutron Glyder Dimmer Udskiftningsknap, GK-IV, Elfenben
3/5

kr 164.75

Lutron Glyder Dimmer Udskiftningsknap, GK-IV, Elfenben
3/5

kr 164.75

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array

Total:kr 0.00

Se vognCheckout

Kategorier

Alle kategorier
Menu Kategorier Nær ved Vogn

Menu