Eaton SI10P-V Skye 3-vejs Single-Pole Full Slide Decorator Dimmer med forudindstilling, 1000 watt, elfenbensfinish

Name: Eaton SI10P-V Skye 3-vejs Single-Pole Full Slide Decorator Dimmer med forudindstilling, 1000 watt, elfenbensfinish
Brand: Eaton
SKU: 0032664663710
Price: 455.01 DKK
Availability: InStock

Brand:Eaton

3.7/5

kr
455.01

Eaton SI10P-V SKYE 1000-Watt 3-vejs enkeltpolet fuldskydedekoratorlysdæmper giver jævn, glidende dæmpning i fuld rækkevidde til glødelamper og magnetisk lavspændingsbelysning. Denne skydedæmper i dekoratørstil er kompatibel med enhver Eaton Wiring Device-afbryder, vægplade eller designerskruefri vægplade. Denne lysdæmper tilbyder lysintensitetskontrol med jævn og kontinuerlig dæmpningsydelse. SI10P-V har Radio Frequency Interference (RFI), der er designet til at reducere interferens med radio-, lyd- og videoudstyr. En strømsvigtshukommelsesfunktion gør det muligt for lyset eller blæseren at vende tilbage til det samme lysniveau før afbrydelsen, mens en LED-indikator viser belastningsstatus. Eaton SI10P-V SKYE 1000-Watt 3-vejs Single-Pole Full Slide Decorator Dimmer er konstrueret af robust polycarbonatmateriale med en aluminiumsrem og har en blank elfenbenfinish, der matcher ethvert hjems indretning. Uanset om et hjems stil er traditionel, moderne, afslappet, hyggelig eller rustik, vil det kræve mere af ledningsenheder end tidligere år. Eaton er dedikeret til at levere de opdaterede ledningsløsninger; løsninger, der øger energieffektiviteten, øger produktiviteten, fremmer sikkerheden på arbejdet og i hjemmet og producerer pålidelig ydeevne. Eaton har været et pålideligt navn inden for elektriske produkter i over 175 år.

Beløb

Tilføj til kurv Køb nu

EAN: 0032664663710

Kategorier Værktøj og boligforbedring, Electrical, Switches og dimmere, Vægafbrydere, Dæmperafbrydere,

Har en blank elfenbensfinish, der matcher ethvert hjems indretning. Tilbyder lysintensitetskontrol med jævn og kontinuerlig dæmpningsydelse. Kompatibel med enhver Cooper Wiring Device-afbryder, vægplade eller designer-skruefri vægplade. Giver jævn, glidende dæmpning i fuld rækkevidde til glødelamper og magnetisk lavspændingsbelysning.

Batteries Required?	‎No
Brand	Eaton
Brand	‎Eaton
Circuit Type	3-way
Circuit Type	‎3-way
Color	Ivory
Color	‎Ivory
Connector Type	Screw
Connector Type	‎Screw
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 137 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	3 x 2 x 4.25 inches
Item Dimensions LxWxH	‎3 x 2 x 4.25 inches
Item model number	‎SI10P-V
Item Package Quantity	‎1
Item Weight	‎4.2 ounces
Manufacturer	‎EATON
Material	Aluminum, Polycarbonate
Material	‎Aluminum, Polycarbonate
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Number of Items	‎1
Number of Positions	3
Number of Positions	‎3
Operation Mode	ON-OFF
Operation Mode	‎ON-OFF
Part Number	‎SI10P-V
Product Dimensions	‎3 x 2 x 4.25 inches
Switch Style	Slide
Switch Style	‎Slide
Unit Count	‎1 Count
Wattage	‎1000 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: fishing buddy

No larger than a switch

In the downstairs ref room we had 7 canister lights operated by a reostat from the 5’s that went bad. Two different electricians did not want to replace it. I found yours on line, the wattage exceeded what I needed for incandescent bulbs. Using led’s the circuit draws 105 watts. Big safety margin. Went together great. Now our ceiling lights work again.

Scritto da: TJC

Appears to be good solid switch that handles higher wattage applications

Used this to replace an existing dimmer switch that didn't last a year. A typical dimmer switch is rated for 600 watts. We have a string of low wattage incandescent bulbs on the patio that at full brightness pulls 500 watts. This switch is rated for 1000 watts and seems to handle the load nicely. Nice action on the dimmer slide and the switch is lighted making it easy to locate.

Scritto da: ctx1050

Good dimmer

I needed a thousand watt incandescent dimmer for a bathroom where a Lutron dimmer had failed. I initially thought of replacing it with the same Lutron model, but the price was over $70 (crazy for a manual incandescent dimmer) and our Lutrons have not held up well (we have many around the house). This Eaton dimmer got good reviews and was much less expensive so I thought I would give it a try. It has now been in use now for a few months and I am quite happy with it. It seems like a good product.

Scritto da: Jim

Quality high wattage dimmer switch.

This switch replaced a dimmer switch used for 5 overhead kitchen flood lights. The wattage rate is much higher than the switch it replaced, which stopped working. Break off tabs made it easier for installation because it was being mounted in a multi gang switch box.

Scritto da: Scott

If you have more to dim

If you have need of a higher wattage dimmer this might fit the bill. Happened to match the other dimmers throughout the house.

Scritto da: Bill S

Works well with 6 flood lights

I have a room with 6 incandescent flood lights so I needed a dimmer that would handle that load. The Eaton SI10P-W Skye works perfectly. It easily carries the load and dims the lights perfectly.

Scritto da: M. Laska

Excellent dimmer. Works great

Excellent dimmer. Works great, and 1000 watts too. Using it in a small switch box with cords connected to dim my Christmas Tree lights down. Still using incandescent bulbs, so, this makes them glow really nice and low in the living room at night in the dark. Otherwise, they would be blasting way too much light on us. Don't want the lights to be too big of a distraction while watching TV. Thanks.

Scritto da: Victory

Good value

Easy to install. Works well. Easy control of lights.

Scritto da: Anna Pereimyvovk

Great product

Great product

Scritto da: Von

excellent

Je suis très satisfait, convient parfaitement!

Scritto da: Ali

Sturdy

I had to replace my previous dimmer, as it was unable to handle dim 10 9W lights! and always had noise inside the dimmer. I decided to replace it with this dimmer and I see now the difference! Great product!

Scritto da: Dantherocketman

Works good.

I have 15 pot lights that are hooked up to one switch. Yes I know that’s likely too many but I was using a 600w dimmer that got really hot to touch. I instead bought this 1000w dimmer. It’s easy to install but be aware it doesn’t have a green ground wire just the small green bolt. You will need to get a ground wire connection to the box. Overall really happy. Doesn’t get too hot and looks good.

Scritto da: Sausage Mahony

Got previously opened item. Dirty with fingerprints

Product arrived in damaged packaging. Had dirt and finger prints on it. Was obviously opened previously and/or a returned item. Hoping it works ok when I install it after cleaning it. Update: Upon installation, found the slider dimmer is mechanically broken/detached inside the unit. Past return window, my fault there I guess.