Defender Security U 11026 jamb reparations- og forstærkningssæt, 59-1/2 installeret, stålkonstruktion, hvid (1 sæt)

Name: Defender Security U 11026 jamb reparations- og forstærkningssæt, 59-1/2 installeret, stålkonstruktion, hvid (1 sæt)
Brand: Defender Security
SKU: 0049793910264
Price: 517.32 DKK
Availability: InStock

Brand:Defender Security

3.5/5

kr
517.32

PRODUKTBESKRIVELSE Med Prime-Lines jamb-reparations- og forstærkningssæt kan du nemt sikre svage punkter og erstatte de mindre, sårbare låse- og deadbolt-angreb, der almindeligvis er installeret med indgangsdørsbeslag; Denne nemme løsning kan tilføje ekstra sikkerhed i hjemmet og hjælpe med at forhindre tvungen adgang; Når det er fuldt installeret, giver sættet op til 12-gauge tykkelse, i en samlet højde på 59-1/2 tomme; Den hvide pulverlakerede finish vil passe ind i din dør; Alle dele kan males; Det er nemt at forstærke din dør, og alle befæstelser og trin-for-trin instruktioner er inkluderet; Sættet har seks sektionsplader, der er nemme at installere, og to dørkantbeskyttere; Den installeres med 10, #8 x 3 tommer; skruer; Dørkantbeskytterne i dette sæt er designet til at passe på 1-3/4 tommer; tykke døre, og låsepladen leveres med valgfri deadbolt knock-out propper for at rumme to forskellige knob-til-låse hul centerafstande; For døre, der er hængt med et tilstrækkeligt stort mellemrum mellem karmen og dørens kant, kan disse plader monteres på dørkarmens overflade; Hardwaren, der følger med dette sæt, er ikke-håndet, hvilket gør det muligt at bruge det på venstre- eller højrehåndede, enkelt- og dobbelthængslede dørsystemer. FRA PRODUCENTEN Dette jamb reparations- og forstærkningssæt er konstrueret af stålkomponenter og kommer i en hvid pulverlakeret finish. Den har seks sektionsplader, der er lette at installere, og to dørkantbeskyttere, og den leveres komplet med 3 tommer lange fastgørelsesanordninger med trin-for-trin installationsvejledning. Dette ultimative reparations- og forstærkningssæt til dørkarmen giver op til 12 gauge tykkelse i en samlet højde på 59-1/2 in., når det er fuldt installeret. Den er designet til at erstatte de mindre, sårbare låse- og deadbolt-angreb, der almindeligvis installeres med indgangsdørbeslag. Dørkantbeskytterne i dette sæt er designet til at passe på 1-3/4 tommer tykke døre, og låsepladen leveres med valgfri deadbolt knock-out-propper for at rumme 2 forskellige knop-til-lås-hul-centerafstande. For døre, der er hængt med et tilstrækkeligt stort mellemrum mellem karmen og dørens kant, kan disse plader let monteres på dørkarmens overflade, andre kan kræve, at pladerne sættes ind i dørkarmen for den bedste pasform. Hardwaren, der følger med dette sæt, er ikke-håndet, hvilket gør det muligt at bruge det på venstre- eller højrehåndede, enkelt- og dobbelthængslede dørsystemer.

Beløb

Tilføj til kurv Køb nu

EAN: 0049793910264

Kategorier Værktøj og boligforbedring, Hardware, Door Hardware & Locks, Lock Replacement Parts,

IKKE-HÅNDT - Hardwaren, der følger med dette sæt, er ikke-håndet, hvilket gør det muligt at bruge det på venstre- eller højrehåndede, enkelt- og dobbelthængslede dørsystemer. 12-GAUGE TYCKELSE – Når det er fuldt installeret, giver sættet op til 12-gauge tykkelse i en samlet højde på 59-1/2 in. HVID PULVERBELATET FINISERING – Stålkomponenterne tilføjer ekstra sikkerhed og kommer i en hvid pulverlakeret finish, der passer perfekt ind i din dør. HJEMMESIKKERHED – Denne nemme løsning kan tilføje ekstra sikkerhed i hjemmet og hjælpe med at forhindre tvungen adgang. JAMB REPAIR KIT – Med Prime-Lines jamb reparations- og forstærkningssæt kan du nemt sikre svage steder og erstatte de mindre, sårbare låse- og deadbolt-angreb, der almindeligvis er installeret med indgangsdørsbeslag.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎White
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 638 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎White
Included Components	‎Hardware;Door, Gate & Window Hardware;screen-door-hardware
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎U 11026
Item Package Quantity	‎1
Item Weight	‎3.69 pounds
Manufacturer	‎Prime-Line Products
Material	‎Steel
Part Number	‎U 11026
Product Dimensions	‎1.63 x 3.63 x 26.25 inches
Size	‎59-1/2 in.

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Mai Tais and Mariachis

Fantastic

I’ve now retrofitted 3 doors in my house with these and they’re great. The ability to sink multiple 3” screws to support the steel structure makes the door much safer.

Scritto da: D Law

Next best thing to replacing door frame.

Helped re-secure a compromised door jamb. Had some damage from a pry bar which loosened up the latch plate in the door frame. This doesn't just replace the latch plate - its a 3-piece interlocking set of plates which creates a more stout frame for both the deadbolt and door handle. There are enough anchor points along the length to make up for small splits in the wood jamb around the weak points.

Scritto da: Nizel A.

Fantastic product!

Pricing - Similar products are $100 or more so this is a steal! I was able to get two for less than the price of one! 5/5 Packaging - Comes with more than is seen in the pictures (actually has two deadbolt/knob protectors.) Old school plastic packaging so definitely not hassle free, but I guess that's expected from a security company 5/5 Design - The jamb parts are double layered which is interesting, but you quickly see why since if one layer fails then the second is still there. If you have double studs or a 4x4 then you'll quickly wish the kits came with at least a 4" drill bit since normal bits don't go far enough with makes you have to give extra effort in-order to get the screws in without stripping them. Other than that, setup is fairly simple so once you do one part, you'll breeze through the rest. The only confusing part was keeping up with all of the different screws for each part (instructions don't specifically say what goes with what.) The design itself is great. As with anything the more screws you add, the more strength it has, so the same applies here. It almost spans the entire length of the jamb & there's numerous 3" screws throughout. It has multiple options for regular locks as well as mortise locks. After setting everything up I gave the door a few shoulder shots, kicks & punches to test (I'm a big guy)... it didn't budge an inch! Not to mention both the steel & paint job are very high quality! 5/5 Overall this is a surprisingly great product. The only thing missing is hinge protection which is a huge let down. Other than that it is easy to install & extremely sturdy. We'll see how it fairs against an actual break-in. 5 out 5 stars

Scritto da: Scott Carle

It's what I said it was

I simply installed it flush on the latch side of the doorway with it centered on the door knob so that it would line up and engage correctly with the door knob mechanism. The door is perfectly flush with the inside rim of the frame it's installed in. By installing this flush up against that same rim that the door abuts against when closed everything lined up perfectly when closed so that there was zero wiggle room but it still latched solidly and easily. I wouldn't of minded instead of two over lapping pieces it being one much thicker solid piece of steel. But the thickness of each individual piece is in no way less than a decent stock latch piece. With it overlapping another piece it is twice as thick and with all the screws installed, which I used 4 inch deck in place of the ones that came with it, it is going to take part of the wall with it if someone is able to break it. Well most likely the Entire door knob or latch post from knob is going to give way first as the door disintegrates. Over all I still don't consider our door secure from someone knocking the door in but I don't think it will be casually done. The only improvement would be to go with a steel door frame and steel security door that are stronger than the wall surrounding the frame and door. When we replaced door we also replaced the standard 3 hinges with 5 more robust hinges all held with 4 inch deck screws. 4 screws per hinge side. I'm looking forward to someone's hurt leg when they try kicking through 20 4 inch steel deck screws on that that all go into the studs the frame is mounted on. Between both sides of the door there is almost 40 4 inch screws that go into the studs.

Scritto da: Gem

Good door jam repair kit

Took some art to get it installed and working perfect but it is well worth the effort and money

Scritto da: T222T222

Not the kit to use if you have an electronic or oversized deadbolt.

Ive been steadily upgrading the security of my house. My budget allowed for me to get to reinforcing the doors this month. I already had large screws and bottom barricades on all the steel outside doors, but I wanted to reinforce the remaining week points. I have 5 metal door, I started with a $90 kit from another company (which I wont endorse by name). I got the kit, I installed it on my front door. I had some issues with the special bit they sent with the kit (the drill bit... bit the dust about 6 screws in), however I had another in the garage and finished the door. The kit fit perfectly. I then went on amazon to order a few more. Then I saw this one for a fraction of the price and just jumped on it. I just got that kit today and went to install it on another metal door. It wont fit in the door jamb without some modifications (which I absolutely dont want to perform). I then tried fitting the "edge guards???", (part E in the item diagram). I slide them onto the door frame to see how they would fit and I was not able to put them flush to the door. It presses right up against the deadbolt and the door knob hardware, with a good half inch gap between where one would screw into part E and the actual door. So for Door number 2, I couldnt use any of the pieces from this kit. I tried door number 3 next. For door number 3 I did the same process of openeing the door and fitting the individual pieces (without drilling). I had the same issue with the edge guards Part E, however I was able to use the long door frame reinforcements. I then fit everything on to door number 4. All the pieces fit well enough for me to consider screwing them into the door. Out of curiosity I tried door number 5 and it fit there too. So 2 out of 4 doors didnt fit part E and 1 didnt fit the door frame. I admit this is more my fault than the manufacturers. Fact is its not the manufactures fault at all. This is a solid door reinforcement kit as far as I can tell. However after randomly buying "that other $90 kit", I figured I could randomly buy this as well. The other kit seems to be one that you can buy and it will almost certainly fit your door. You'll want to measure and be prepared to make modifications for this kit. If you're handy then its probably worth the savings. My analysis is pretty simple, Part E wont fit on a door with a larger than normal deadbolt. It is made to press right up to that tiny deadbolt circle size. All of my doors with electronic locks or heavy duty deadbolts rejected part E. Since I plan on upgrading all my locks to this electronic the Schlage Camelot Keypad Deadbolt https://www.amazon.com/gp/product/B001RFMDHU/. This kit will not work with that on my doors. You have a standard door with a standard deadbolt and decent spacing between the door frame and the door edge, this could be the best kit for you.