CURT 56377 Køretøjsside tilpasset 4-benet trailerledningsnet, Vælg Mazda CX-5, sort

Brand:CURT

3.6/5

kr
809.05

Hvis dit køretøj ikke er udstyret med ledninger til at trække en trailer, er CURT brugerdefinerede ledninger den ideelle løsning. Et brugerdefineret ledningsnet - også kaldet et T-stik - er en enkel, plug-and-play elektrisk enhed, der tilsluttes dit bilelektriske system og giver en standard, universel anhængerledningsforbindelse. Dette gøres ved hjælp af to eller flere køretøjsspecifikke, OEM-kompatible stik til at tilslutte til baglygtesamlingen, hvilket eliminerer behovet for skæring, splejsning og lodning under installationen. Brugerdefinerede ledningsnet er gjort køretøjsspecifikke, og selvom de ikke er tilgængelige til alle køretøjer, tilbyder de en af ​​de hurtigste, nemmeste og sikreste måder at forbinde et køretøj til bugsering. Denne særlige plug-in-sele giver en 4-vejs flad stikdåse og er designet til at være et brugerdefineret ledningsnet, der passer til visse år af Mazda CX5 (for at verificere dit køretøjs kompatibilitet, se applikationsinfo). Den leveres med alle nødvendige ledningskomponenter for at etablere en pålidelig anhængerledningsforbindelse, samt et støvdæksel for at holde stikket rent, når det ikke er i brug. Du har et billede i tankerne af din næste destination -- måske er det båden, der lander på dit foretrukne fiskested, måske er det en campingplads, der har udsigt over et af naturens mesterværker, eller måske er det den næste store arbejdsplads. Men at gøre dette billede til en realitet kræver mere end blot at dagdrømme. Det kræver en solid forbindelse og den rigtige mængde strøm. CURT brugerdefinerede ledninger er lavet med noget af den mest sofistikerede teknologi i branchen og er designet til at installere med lethed, hvilket giver dig en langvarig elektrisk forbindelse til dit anhængertræk.

STØVDÆKKE. For at fremme langvarig brug og vejrbestandighed leveres denne 4-polede ledningsnet til trailerbelysning med et gummistøvdæksel. Den passer nemt på det 4-vejs flade stik, når den ikke er i brug, og beskytter den mod udendørs elementer. PÅLIDELIG KRAFT. Dette 4-vejs anhængerledningsnet er bygget med overflademonteringsteknologi. Denne type kredsløb genererer mindre varme, optimal lysintensitet og holdbar ydeevne. KØRETØJSSPECIFIK. Dette eftermarked, køretøj-trailer ledningsnet er designet til udvalgte år af Mazda CX 5. STANDARD KONTAKT. Denne plug-in 4-flade trailerledning kan bruges til at forbinde trailerbaglygter, bremsesignallys og blinklys. 4-vejs trailerlysledninger er populært på en række forskellige trailere, hvilket tilføjer alsidige bugseringsmuligheder til dit køretøj. LET AT INSTALLERE. Ingen skæring! Ingen splejsning! Dette anhængerledningssæt tilsluttes eksisterende fabriksledninger på dit køretøj og udstyrer det med et standard, bageste 4-bens anhængerledningsstik til at tilslutte og trække en anhænger.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 224 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item model number ‎56377
Item Weight 1.63 Pounds
Item Weight ‎1.63 pounds
Manufacturer ‎CURT
Manufacturer Part Number ‎56377
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56377

3.6

13 Review
5 Star
78
4 Star
13
3 Star
3
2 Star
2
1 Star
4

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Justin E
Low quality
The connector was crushed when I got it. This was the second time I've installed a curt trailer wiring harness for two different cars. Quality of materials seems lower than my first harness. Easy to install but a hassle without a lift for the cx5 because of all the paneling.
Scritto da: cheesis
wired, baby!
This is a decent kit with an isolator to keep vehicle's electrical system unaffected by wiring problems that originate with your trailer. The two sided tape affixed to the back of the isolator/ control unit was as dry and useless as tits on a mule, so you'll have most likely to figure another way to secure it to one of your interior panels. Also take note that when you secure your two thick wires together that one is 14 ga. and the other 12, and the butt connector provided, being a 10/12 might have to get a little extra crimping on the 14 side. Made in China
Scritto da: Al A.
Well made and my Mazda Dealership installed it and complimented me on this harness!
I had my Mazda dealer handle installation of this and a Curt 2" receiver on a new 2021 CX-5 Signature I just purchased. I'm familiar with Curt products as I've owned them before and every one was well made. The tech who installed this said it was a great choice and he said the installation went very easy and logically as well. The Tech and I discussed any shortcuts to the install and he emphasized not to take a shortcut and splice to the hot wire to the rear 12V cigarette receptacle as does Curt NOT want you to do this per the installation instructions. The hot wire should go to the battery location under the hood. My Utility Trailer uses all regular bulbs rather than low power LEDs and the Tech said it is safer and more reliable to hot wire to the battery due to the higher demand on that circuit branch. Given I might use that rear cirgarette lighter location for other accessories, that all makes sense. Maybe I'll convert my trailer to all LEDs at some point. Both the Service Advisor and the Tech warned me not to take any shortcuts and they wanted to adhere to Curt's Installation instructions for this harness, including the black hot wire that has to run to the front of the vehicle. It was, -By the Book, period!- There is plenty length for the harness connection and everything is stored in the rear wheel-well where the spare tire is located. No complaints and when a Mazda tech says a product is great and the install of it was the same, that's good enough for me! 5 Stars all around and no complaints at all.
Scritto da: Steve Gordon
Fits well all aspects , good product thanks
Mazda Installation difficult ! Harness great quality, needs wiring 12 in longer for trailer connect
Scritto da: aussiemama
Doubleback tape
The doubleback tape was useless, had no adhesion, past shelf life. Kit install pretty straight forward.
Scritto da: B. T.
Install by watching the video. There's one tricky part.
This adapter is well made and overall pretty easy to install. Of course running the power wire from the battery is a pain, but it can be done without a lift. I was able to squeeze under the car and zip tie the power wire to the existing support and then put the plate that protects that area back on. I used the Uhaul video and it walks you through the entire install in great detail. They use an upgraded battery cable but it's pretty self explanatory how to use the one that comes in this kit. I was able to install this in about an hour. I leave it inside the car under the trunk mat and just run it out and hook it up and then close the trunk over the wires when in use. You can also mount it outside the car, but then you'll need to worry about keeping the connection clean. As little as we use it I'd rather keep it out of the elements until needed. The trunk does not damage the wires when closed.
Scritto da: Amazon Customer
Easy to install for a total newbie with no special tools!
It took me a day (I have an infant so everything takes me much longer than it should) but it works and I figured all of it out myself!
Scritto da: Michael Maxwell
Easy install
Easy install, but I tapped positive into the power lead for the accessory socket in my cargo area. More than enough amps on that fuse in my car to handle the lights, and I installed the inline fuse as a backup. Didn't feel like running a power lead under the car and didn't need to. Works perfectly. Extra length sits in my spare tire area and I just close the hatch over the wire when not using it. I only use it a few times a year anyway so no sense running it through the floor.
Scritto da: Dohn
Very easy to install
Good product instructions
Scritto da: Barry C.
Works great on Mazda CX-5
Had it installed professionally, works as expected.
Scritto da: Amazon Customer
Easy to install works well
Works as advertised easy to install
Scritto da: Luma46
Works well on 2021 Mazda CX5
Good product, fits the vehicle, but not so easy to install. You have to partially remove some cover panels from trunk and run a + wire from battery, under the vehicle into the trunk.
Scritto da: Sanchit Datyal
Worked on mazda cx5 2019
Highly recommend it and took 2 hrs for installation

Relaterede produkter

hot
Hopkins 47155 4-leder flad adapter
3.7/5

kr 450.89

Hopkins 47155 4-leder flad adapter
3.7/5

kr 450.89

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array