CURT 56245 Køretøjsside tilpasset 4-benet trailerledningsnet, passer til udvalgte Chevrolet Traverse, GMC Acadia, Buick Enclave

Brand:CURT

3.8/5

kr
507.95

CURT brugerdefinerede ledningsforbindelser er den nemmeste måde at udstyre dit køretøj med en CURT trailer ledningsforbindelse. De er bygget med noget af den mest avancerede teknologi i branchen, og hver enkelt er tilpasset til at arbejde med et specifikt mærke og model. Nogle bilproducenter installerer en speciel stikdåse på køretøjet, der skal bruges til køretøj-til-trailer ledninger. Selvom dette specielle stik ikke er udstyret på alle køretøjer, bruger et CURT brugerdefineret ledningsstik - også kaldet et T-stik - stikket til enkel, stressfri installation. I stedet for at kræve, at du skærer, splejser og lodder ind i dit køretøjs ledningssystem, bruger det tilpassede ledningsstik et enkelt OEM-kompatibelt stik og giver øjeblikkeligt en standard, universel ledningsforbindelse mellem køretøj og anhænger, typisk i form af en 4-vejs flad. Alle CURT brugerdefinerede ledningsforbindelser er lavet køretøjsspecifikke for den nemmest mulige installation og den bedste pasform. Dette særlige plug-in-stik giver en 4-vejs flad stikdåse og er designet til at være en brugerdefineret ledningsmulighed for visse år af Chevy Traverse, GMC Acadia og Buick Enclave (fabrikstrækpakke påkrævet; for at verificere dit køretøjs kompatibilitet, se applikationsinfo ). Den leveres med al nødvendig hardware for at etablere en solid forbindelse. Den leveres også med et støvdæksel for at holde stikdåsen ren, når den ikke er i brug. For at sikre langvarig pålidelighed er alle CURT brugerdefinerede ledningsforbindelser grundigt testet for optimal funktionalitet. Stress er det sidste, du skal føle, når du trækker en trailer - uanset om du trækker din RV til den foretrukne campingdestination, dine ATV'er op til jagtmarkerne eller din fiskerbåd til det nye skjulte hotspot. Hos CURT mener vi, at dit trækudstyr skal bidrage til glæden ved din oplevelse, ikke forringe den.

STØVDÆKKE. For at fremme langvarig brug og vejrbestandighed leveres denne 4-polede ledningsnet til trailerbelysning med et gummistøvdæksel. Den passer nemt på det 4-vejs flade stik, når den ikke er i brug, og beskytter den mod udendørs elementer. LETT GRÆB. Det er nemt at tilslutte din anhængerledning og anhængerlys med det ergonomiske design af denne stikkontakt. Den har faner på toppen og bunden for et bedre greb, når du tilslutter din trailer eller trækker stikket ud. KØRETØJSSPECIFIK. Dette eftermarked, køretøj-trailer ledningsnet er designet til udvalgte år af Chevrolet Traverse, GMC Acadia og Buick Enclave (fabrikstrækpakke påkrævet). STANDARD KONTAKT. Denne plug-in 4-flade trailerledning kan bruges til at forbinde trailerbaglygter, bremsesignallys og blinklys. 4-vejs trailerlysledninger er populært på en lang række trailere, hvilket tilføjer alsidige bugseringsmuligheder til dit køretøj. LET AT INSTALLERE. Ingen skæring! Ingen splejsning! Dette anhængerledningssæt tilsluttes eksisterende fabriksledninger på dit køretøj og udstyrer det med et standard, bageste 4-bens anhængerledningsstik til at tilslutte og trække en anhænger.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 574 ratings 4.7 out of 5 stars
Exterior ‎Smooth
Finish Type Powder Coated
Is Discontinued By Manufacturer ‎No
Item model number ‎56245
Item Weight 0.44 Pounds
Item Weight ‎7 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56245
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎BKDK56245
Product Dimensions ‎9 x 4 x 2 inches
Vehicle Service Type Marine-Personal-Craft, ATV, Trailer

3.8

13 Review
5 Star
84
4 Star
9
3 Star
3
2 Star
1
1 Star
3

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Greg Monett
Long thin arms would help
I had to jack up the SUV, remove the rear passenger wheel and the lossen the fender liner. If I had thinner forearms it would have gone in easier, the product works as designed. Great wiring, along with fuses and relays.
Scritto da: Thomas Snook
Perfect fit, all needed fuses and relays included
This part is perfect, was difficult to instalk thanks to GM Corp. J needed to use included fuses and relays to get trailer lights to work. Highly recommend
Scritto da: Amazon Customer
The product is good and the instructions are pretty straight-forward
The product is good and the instructions are pretty straight-forward, but the wiring is a pain to connect to the wire harness of a 2014 GMC Acadia due to GMC's placement. The fuses and relays are simple to install and the instructions are clear. For the 2014 Acadia, the battery is in the floor behind front passenger seat (slide the front passenger seat all the way forward, open the rear passenger-side door, flip up the floor mat, remove the plastic cover under the passenger seat, and I think I used a t-20 torx bit to remove the screw holding the battery cover on, and then I used a 10mm socket to remove the negative battery cable). After removing several screws to the inner fender cover, you pry the cover to the side and you'll see the wiring harness inside, toward the rear. The harness is mounted to the cars body on a plastic "clip". The harness can be slid off of the clip to allow just enough movement to plug the Curt harness to it. Then I slid the harness back onto the clip, reattached the inner fender and reconnected the battery. I ran the Curt harness to the bumper mount and ran it inside the frame, and popped it out through the access hole for installing the hitch. Thinking baout it now, I probably need to wrap tape around it where it comees out of the hole to protect it from abrasion.
Scritto da: Jonathan
Great product
It was so easy to install and all the parts to install it were there ????
Scritto da: Phillip Brittain
Perfect for my vehicle
Worked perfectly
Scritto da: J Batey
Very easy install, but a bit pricey
I installed this on my 2017 Chevy Traverse. Very nice that the Traverse is prewired for this. The directions state that the rear wheel and wheel well cover need to be taken off. There's no reason to do this - just feel for the plug on the vehicle and attach it blind. There is only one plug in that location and it can only be inserted in one direction, so you do not absolutely need to see what you are doing. Save yourself the headache of removing what the directions state to remove! This is a nice wiring harness, but I do believe it is a little pricey for what you get, granted you do get all the relays and fuses that you need as well.
Scritto da: ARS
Worked perfectly.
Installed on my 2014 Chevy Traverse. It comes with good instructions. I followed them and it works perfectly on my boat trailer. Note it can be difficult to see the small numbers in the fuse box for each fuse you have to install so get in good lighting.
Scritto da: don campbell
Right turn /brake light quit working used it 2 times
It’s is hard to install because of where the manufacture of the car put it
Scritto da: Rob
Awesome fit and easy install!
Nothing that was listed from Reese for my 2014 Buick Enclave would fit. Curt had the solution and it was easy to install. Great product.
Scritto da: Amazon Customer
Worked
Fairly easy to hookup and use. Worked like a charm
Scritto da: Chris
price
I like this product it was perfect and came as described and the price was good.
Scritto da: Emily Kennedy
Perfect
Perfect for my 2016 Chevrolet Traverse LS! Plug and play, easy to install!
Scritto da: Marcel
Easy to follow instructions, plug and play connection
Just follow the instruction and the install will be easy and smooth! you will need to provide some of your own longer tywraps to secure wiring but no big deal.

Relaterede produkter

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array