CURT 56147 Tilpasset 4-benet trailerledningsnet på køretøjssiden, passer til udvalgte Toyota Prius

Brand:CURT

3.8/5

kr
811.61

STØVDÆKKE. For at fremme langvarig brug og vejrbestandighed leveres denne 4-polede ledningsnet til trailerbelysning med et gummistøvdæksel. Den passer nemt på det 4-vejs flade stik, når den ikke er i brug, og beskytter den mod udendørs elementer. PÅLIDELIG KRAFT. Dette 4-vejs anhængerledningsnet er bygget med overflademonteringsteknologi. Denne type kredsløb genererer mindre varme, optimal lysintensitet og holdbar ydeevne. KØRETØJSSPECIFIK. Dette eftermarked, køretøj-trailer ledningsnet er designet til udvalgte år af Toyota Prius. STANDARD KONTAKT. Denne plug-in 4-flade trailerledning kan bruges til at forbinde trailerbaglygter, bremsesignallys og blinklys. 4-vejs trailerlysledninger er populært på en række forskellige trailere, hvilket tilføjer alsidige bugseringsmuligheder til dit køretøj. LET AT INSTALLERE. Ingen skæring! Ingen splejsning! Dette anhængerledningssæt tilsluttes eksisterende fabriksledninger på dit køretøj og udstyrer det med et standard, bageste 4-bens anhængerledningsstik til at tilslutte og trække en anhænger.

Ingen tilgængelige enheder
STØVDÆKKE. For at fremme langvarig brug og vejrbestandighed leveres denne 4-polede ledningsnet til trailerbelysning med et gummistøvdæksel. Den passer nemt på det 4-vejs flade stik, når den ikke er i brug, og beskytter den mod udendørs elementer. PÅLIDELIG KRAFT. Dette 4-vejs anhængerledningsnet er bygget med overflademonteringsteknologi. Denne type kredsløb genererer mindre varme, optimal lysintensitet og holdbar ydeevne. KØRETØJSSPECIFIK. Dette eftermarked, køretøj-trailer ledningsnet er designet til udvalgte år af Toyota Prius. STANDARD KONTAKT. Denne plug-in 4-flade trailerledning kan bruges til at forbinde trailerbaglygter, bremsesignallys og blinklys. 4-vejs trailerlysledninger er populært på en række forskellige trailere, hvilket tilføjer alsidige bugseringsmuligheder til dit køretøj. LET AT INSTALLERE. Ingen skæring! Ingen splejsning! Dette anhængerledningssæt tilsluttes eksisterende fabriksledninger på dit køretøj og udstyrer det med et standard, bageste 4-bens anhængerledningsstik til at tilslutte og trække en anhænger.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 327 ratings 4.7 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56147
Item Weight ‎1.04 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56147
Material Rubber
Model ‎56147
OEM Part Number ‎56147
Product Dimensions ‎9 x 6 x 3 inches

3.8

10 Review
5 Star
86
4 Star
9
3 Star
1
2 Star
2
1 Star
2

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Tim
Plug and play
Very easy to install, just follow the directions and route the wires correctly. You have to remove quite a few body panels if you want the wires fully hidden so I’d recommend a panel trim tool
Scritto da: charles
Works great
Easy installation and works exactly as described
Scritto da: TKJ
Curt products are good
Good product
Scritto da: Manila Mike
Simple Satisfaction
I'm just glad for everyone who decides to put a hitch and trailer hookup on their Prius! This certainly will not answer every hauling need but it will help save fuel and money with quite a few. Great instructions with pictures specific to my car made it easy to install this wiring harness in my 2010 Prius Five. There was plenty of wire to reach all the places needed to plug it in. The directions suggest finding a screw for attaching the ground terminal but I could not really locate any that would work in the area so took it directly to the negative side of the battery. Installation took close to half-an-hour. I opted not to run mine out through the rubber drain plug under the spare tire as I could already see a little corrosion built up there. I wanted to keep the plug end and the underside of the spare nice and clean. Instead, I just run it out the hatch door when I use it. It pinches firmly enough in the rubber gasket to hold it in place but not too much to damage the wire. I do need to remember to stay clear of the latch in the middle when I feed it out toward my trailer tongue. It was such a great feeling of satisfaction when I plugged this into my trailer lights and everything worked the way it should. If only all of life could be as simple and fulfilling.
Scritto da: Dave
Works nice
Very easy kit to install on your Prius, works well. I have a 2010 Prius III with 185k on it. I've used this kit and the Curt Receiver and hitch kit 112763 and Curt ball 40003. I towed a 2040lbs trailer with 300-400lbs tongue which was very overloaded on the tongue. I even hit a nasty dip in a parking lot at 10-20mph and didn't seem to bend anything. Can cruise at 65mph with my oversized AT tires and 1.5" lift. You definitely feel the trailer back there and it does push you but it's pretty much a 90's Ford Ranger. The only problems I had towing were possibly drastically increased oil consumption and a very random burning smell coming from the AC, which I couldn't really figure out.
Scritto da: Bill Foster
Installed on my 2007 toyota prius
This was very fast to install (10-15) mins max. If you're handy you'll have no problems putting this on your prius. I'm very happy with the purchase and can't wait to make use of this in the future.
Scritto da: Amazon Customer
good idea but poor quality
Apparently this article has been in the warehouse for too long, the tapes did not work, the rubber pairs to protect the fuse and connectors, everything was broken. Either it is very old or it is of poor quality. north
Scritto da: Jane M.
Works well, Reese might be slightly easier install
Curt 56147 Prius trailer lights harness. Install was easy enough and it works as it should. Packing it efficiently into the space instructed was a PIA but it's in there. There really isn't a goid place to adhere the module as the wire stiffness over powers the double sided mounting pad so I just wrapped and taped it with poly foam and carefully tucked it in there. The connectors were easy to use. I don't think the Reese unit requires a separate power source direct to the battery which required removing some covers and brackets, not a huge problem,but time consuming. The room for attaching the ground lead I'd very limited so I drilled a pilot hole with a drill bit b4 using the self tapper, saved some hassle getting it to start
Scritto da: Andrew Sinclair
Worked great on 2008 Prius
Very easy install on my 2008 prius.
Scritto da: Serge L
Connecteur Prius bon produit
Très bon produit

Relaterede produkter

hot
hot
Reese Towpower 74216 T-stik
3.9/5

kr 428.09

Reese Towpower 74216 T-stik
3.9/5

kr 428.09

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array