CURT 23527 Trailerlåsesæt til 2-tommers modtager, 2-1/2-tommers koblingslåsespænd

Brand:CURT

3.2/5

kr
576.13

VANDTÆT. De indvendige komponenter i træklåsen og anhængerkoblingslåsen kan nemt beskyttes mod vejr og vind med de medfølgende vandtætte støvhætter. PRAKTISK. Trailerlåsene i dette sæt har en simpel 1/4-drejnings låseaktivering for hurtig låsning og oplåsning efter behov. Låsene er også tastet ens for bekvem adgang med én nøgle (fire nøgler inkluderet). ALSIDIG. Med en 5/8-tommers diameterstift passer modtagerkoblingslåsen til praktisk talt enhver 2-tommers hitch-modtager med et 5/8-tommer hul. Koblingslåsen har en 1/4-tommers stift og passer til et koblingsspænd på op til 2-1/2 tommer. PÅLIDELIG STYRKE. For at beskytte dit udstyr mod tyveri og give dig ro i sindet, er træklåsen og anhængerkoblingslåsen lavet med højstyrke stålkonstruktion. FULDSTÆNDIG SIKKERHED. Dette trailerlåsesæt tilbyder omfattende sikkerhed for dit træksystem. Den inkluderer en anhængertræklås til at låse et kuglebeslag eller andet tilbehør til modtagertræk samt en koblingslås til at sikre dit anhængertræk.

VANDTÆT. De indvendige komponenter i træklåsen og anhængerkoblingslåsen kan nemt beskyttes mod vejr og vind med de medfølgende vandtætte støvhætter. PRAKTISK. Trailerlåsene i dette sæt har en simpel 1/4-drejnings låseaktivering for hurtig låsning og oplåsning efter behov. Låsene er også tastet ens for bekvem adgang med én nøgle (fire nøgler inkluderet). ALSIDIG. Med en 5/8-tommers diameterstift passer modtagerkoblingslåsen til praktisk talt enhver 2-tommers hitch-modtager med et 5/8-tommer hul. Koblingslåsen har en 1/4-tommers stift og passer til et koblingsspænd på op til 2-1/2 tommer. PÅLIDELIG STYRKE. For at beskytte dit udstyr mod tyveri og give dig ro i sindet, er træklåsen og anhængerkoblingslåsen lavet med højstyrke stålkonstruktion. FULDSTÆNDIG SIKKERHED. Dette trailerlåsesæt tilbyder omfattende sikkerhed for dit træksystem. Den inkluderer en anhængertræklås til at låse et kuglebeslag eller andet tilbehør til modtagertræk samt en koblingslås til at sikre dit anhængertræk.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 103 ratings 4.2 out of 5 stars
Exterior ‎Chrome
Finish Type Chrome
Is Discontinued By Manufacturer ‎No
Item model number ‎23527
Item Weight ‎13.7 ounces
Manufacturer ‎CURT
Manufacturer Part Number ‎23527
Material Carbon Steel
Model ‎23527
OEM Part Number ‎23527
Product Dimensions ‎8.75 x 2.88 x 1 inches
Vehicle Service Type Marine-Personal-Craft, ATV, Trailer

3.2

10 Review
5 Star
59
4 Star
16
3 Star
12
2 Star
9
1 Star
4

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med*

Scritto da: Arturo Figueroa
Trailer lock set
This is a great purchase, have one key for the two locks is great. They seem to be well made.
Scritto da: Stephen Champion
Too short for Tacoma factory hitch
Not my favorite. The no go problem is that the receiver lock is too short to fit on my Tacoma. The information in the product listing only provides overall length, not usable length, so I couldn't *know* it would fit prior to purchasing. The coupler lock was *exactly* the right length for the bulldog coupler on my 7000# auto hauler. Unfortunately, the lock and barbell are a smidge to short to engage on my Toyota OEM 2" receiver. Even if it fit my truck, I would still look for a different set. The locks I currently use (from different manufacturers) are spring loaded, so I only use the key to unlock - I snap the lock onto the shaft, pull to test it, and off we go. On these Curt barbell type locks without the spring latch. you have to both hold the lock shaft in place and keep the lock from spinning while turning the key to engage the lock. My test fitting with these Curt locks made me realize the value of the spring latch.| The retainer for the rubber cover came off when I pulled the cover off. I can see that being very annoying if I actually used these. Not a terrible product in my limited experience, not one I would recommend.
Scritto da: Samuel
Love CURT trailer parts
I have been using CURT trailer parts for years now! i normally get the barbed tongue lock but it has gotten bent the last 2 times then hangs up. So this time i went with the heavier duty solid shaft. It has everything i wanted but sadly the lock on the 3rd connect stuck. I played with the lock and got the key out, tested pulling on the lock 2 or 3 times. then drive for 1 hr to my customer and when i got to the back of the truck the lock and shaft were gone. I am probably a fluke but be weary of the lock. that has always been my worry the rubber covers always wear out first then the locks gum up shortly after
Scritto da: Melek
I am so pleased with these locks.
At first, I didn't think it would fit the pin side of my camper. It looked too big, but it slipped in without trouble. I do agree with others about it being difficult to lock and unlock, because the locking mechanism spins with the rod, but with a little practice-it will be second nature. The sturdiness and slim features combined will hopefully help keep it safe from thieves. There's very little space on the outside for a hammer or clamp to wrench off. I am glad I bought this locking system. Great value for the money, too!
Scritto da: Nick Plaskon
Seems Pretty Good
So far so good. Items arrived on time, in new condition. The smaller pin is way longer than necessary, the larger one works fine & is long enough for a Class I or Class II hitch (1-1/4" square receiver opening). Turn the key clockwise to unlock, which seems counter-intuitive to me. I like the convenience of the locks being keyed-alike. Im satisfied with this purchase.
Scritto da: Joebackman1
Purchased product because it claimed origin of product USA but is actually made in China
Would not recommend. Should have known as soon as I received product the plating on the locks looked very cheap. Typical China grade. Won't be buying Curt products again. Junk.
Scritto da: Curtis C.
Garbage!
Buyer beware. These locks are junk. Lock will not work after 2 months. Cheap crap!
Scritto da: GK
Requires modification to fit 2010 Tundra Hitch, but nicely made.
Was a little too skinny for my 2010 Tundra on the hitch side. I ground it down and made it work. Nicely made, good quality, good value. They provide a bunch of keys too, which is nice.
Scritto da: Leonard Hutchins
Good stuff
Works great
Scritto da: Eric
Not built for Canadian Winters
Not built to handle Canadian Winters. Road salt killed this lock in only 4 months of use. My old Master brand hitch lock made it 4+ winters and still worked good (it also rusted up and looked bad, but never left me locked out like this one did). “Durable Chrome-plated finish” is not an accurate description.

Relaterede produkter

hot
CURT 58999 RV-selediodesæt, sort
3.6/5

kr 544.31

CURT 58999 RV-selediodesæt, sort
3.6/5

kr 544.31

Oplev vores internationale netværk

Vi sender til 28 lande, over 200.000 produkter. Hold dig opdateret, tilmeld dig nyhedsbrevet.

Array