BOSCH CO14B 14-Styks Cobalt M42 Metalbor Assorteret Sæt 14 stk. Boresæt

Name: BOSCH CO14B 14-Styks Cobalt M42 Metalbor Assorteret Sæt 14 stk. Boresæt
Brand: BOSCH
SKU: 0000346594591
Price: 543.92 DKK
Availability: InStock

Brand:BOSCH

3.7/5

kr
543.92

BOSCH Cobalt M42 metalbor er konstrueret med opgraderet M42-legering, der indeholder 8 % kobolt. Disse hårde kobolt-bits leverer 10x levetid i forhold til standard-bits, har en arbejdslængde og modstår applikationer med høj varme. Det tykke web-helix-design giver hurtig materialefjernelse og øget stabilitet. Bits, der er 1/8 tommer. Og større har et splitpunkt; bits 3/16 tommer. Og større har et tre fladt skaft, for bedre bid-greb. Disse koboltbor giver overlegen ydeevne i rustfrit stål og kan bruges til at bore støbejern, titanium og andre hårde eller slibende metaller.

Beløb

Tilføj til kurv Køb nu

EAN: 0000346594591

Kategorier Værktøj & Håndværktøj, Elektroværktøjsdele og tilbehør, Elektrisk boremaskine dele & tilbehør, Bor Bits, Twist Bits, Jobber Drill Bits,

Inkluderer – 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 1/2. Overfladehærdet spids – trænger gennem hårde slibende materialer. Tykt web-helix-design – giver ekstra stabilitet i hårde applikationer. Højvarmebestandige bits – tåler anvendelse ved høje temperaturer i længere perioder. Forbedret M42-legeringsmateriale – indeholder 8 % koboltlegering, der leverer 10x levetid i forhold til standardbits. Cobalt M42 bor – leverer opgraderede M42 Cobalt bore-længde bor designet til holdbarhed, høj varmebestandighed og hærdet overflade til rustfrit stål, støbejern, titanium, letmetal og aluminium.

Batteries Required?	‎No
Brand	BOSCH
Brand	‎BOSCH
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 4,381 ratings 4.6 out of 5 stars
Cutting Angle String	135 Degrees
Cutting Angle String	‎135 Degrees
Included Components	‎14 Drill Bits; Case
Item model number	‎CO14B
Item Package Quantity	‎1
Item Weight	‎1.06 pounds
Manufacturer	‎BOSCH
Material	Stainless Steel, Cobalt
Material	‎Stainless Steel, Cobalt
Measurement System	‎Inch
Package Dimensions	‎8.86 x 4.49 x 1.65 inches
Part Number	‎CO14B
Shank Type	Straight
Shank Type	‎Straight
Size	‎14 pc. Drill Bit Set
Surface Recommendation	‎Cast Iron,Metal,Metals,Stainless Steel
Tool Flute Type	Spiral
Tool Flute Type	‎Spiral
Warranty Description	‎Product Defects Only

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: BlueWing

The bits went through stainless steel sheets like a hot knife through butter!

After destroying several standard carbide bits I purchased these bits and drill bit lube and using a slow speed on drill press cut holes effortlessly without heat hardening the stainless steel.

Scritto da: David Garvin

Excellent deal

I’m not sure why others are having issues with these. I smoked 6 new titanium bits trying to center drill some stainless bolts. These cobalt bits made short work of it. And the price? Excellent!

Scritto da: Henry Ting

Great drill bits at a very reasonable price.

I highly recommend these drill bits. These cobalt drill bits are tough, solid and very reasonably priced. Other than specialized tungsten drill bits for machinery work, these ones will handle all your regular project with ease. They are tough and good for 98% of all the drill needed. I've uses some other high-priced drill bits and they cannot compare to this version.

Scritto da: John Allen

great

awesome set of bits in use everyday and haven't let me down

Scritto da: John M

Very nice bit! Great price!

Needed this to cut through 1/4” HSLA plat. Did a precise job. Best price anywhere. Delivered the next day - just when I needed it.

Scritto da: Henry moore

Drills bits

Cuts through hard metal with ease

Scritto da: Doug L.

Drill it

These drillbits are nice, sharp and cut like butter

Scritto da: Dominick B

Just the right assortment in drill sizes.

Used for drilling pilot holes in wood studs through Sheetrock and larger holes through Sheetrock and metal studs. This set has lasted longer than others and included all the right sizes.

Scritto da: GaryPM

Does the job but not great

Bought one of these bits to replace a same-size broken Norseman Super Premium to drill into stainless steel. There's no comparison: the Norseman is simply far superior. The Bosch did eventually drill through the stainless, but it took about 3x longer than the Norseman.

Scritto da: Umpa

Chipped 1/2” bit.

What is drilling on my drill press through quarter inch plate steel. Used quarter inch pilot hole drill bit at.1540 rpm went through like butter. Changed to half inch bit and on third hole the point on one wing chipped off. And yes, I was using cutting oil Speed was.780rpm. They say they are a bit more brittle with cobalt. I’m just hoping it was a defect. Amazon warranteed it by replacing the whole set. I have not used since time will tell thanks. Umpa

Scritto da: Audios

Wouldn't put a scratch on a masonry nail head

I bought these to drill off the tops of masonry nails with integrated washers that were used to fasten strips of aluminum that were used to support our downspouts. I wanted to save the strips so I could reuse them when I relocated the downspouts. Good quality HSS bits wouldn't touch the nails and using my 1970's Dremel with an abrasive bit was slow going and the Dremel was getting uncomfortably hot. I read about the cobalt bits and thought they'd definitely be the answer. Nope. Absolutely useless. I tried 3 or 4 sizes and as much weight as I dared to use and they didn't even leave a scratch so it was back to the Dremel, which eventually got the job done. I was dumbfounded given how useless the bits were given the sales pitch. The only reason I gave 2 stars was the bits did work very well on a Tapcon that had snapped off and had to be drilled out, although my regular bits might have worked--not sure on that one. Overall, very disappointing given the cobalt hype.

Scritto da: angeleyes

Best drill set to remove damaged or broken hardened steel bolts

This drill set saved the day. My wife’s BMW had a wheel lock bolt that was over torqued and when tried to remove , the tip of lug key broke and jammed in the head . I used a couple of wheel stud extracting tools to no avail. The BMW wheel stud keys are round and hardened steel making the job difficult. I tried drilling with HSS drill bits which were useless. After doing some research on drill bits I chose this drill set because of the hardened quality Cobalt M42 and affordable price. The ultimate hardened drills are carbide and not suitable for hand drilling as they are brittle and will break. These cobalt grade M42 drills drilled slowly through the stud head like butter. Started with 3/16” then 1/4” and finished with 1/2”. If it doesn’t say M42 Cobalt grade Don’t waste your money on anything else.

Scritto da: maximino.cardenas@pmicim.com

Excelentes

Hola! Me agradaron las brocas de cobalto para perforar metales duros, las recomiendo sin reservas. Solo sugiero para un mejor resultado, no revolucionar mucho el taladro, basta con ir imprimiendo toques continuos y la broca perfora sin problema. De lo contrario solo lastimarás la broca.