Armacost Lighting 840600 60 watt Dæmpbar driver til LED-belysning, med aftagelig vekselstrømsledning, hvid 60 watt 12 volt belysning

Name: Armacost Lighting 840600 60 watt Dæmpbar driver til LED-belysning, med aftagelig vekselstrømsledning, hvid 60 watt 12 volt belysning
Brand: Armacost Lighting
SKU: 0850080006528
Price: 787.27 DKK
Availability: InStock

Brand:Armacost Lighting

3.7/5

kr
787.27

Armacost-belysning 60-watt dæmpbar LED-driver giver enestående LED-dæmpningsydelse og lysstyrkekontrol i arkitektonisk kvalitet. Selvom stort set alle lysdæmpere vil fungere med denne dæmpbare LED-driver, anbefaler Armacost Lighting Lutron CFL og Leviton illumatech universelle lysdæmpere på grund af deres lave justering af dæmpningsområde. Leverer jævn, stabil, flimmerfri dæmpning med blød start og ønskelig fade-on og fade-to-dark ydeevne. Når en lysdæmper er indstillet til fuld lysstyrke, leverer LED-driver fuld lysstyrke - der er intet tab af top-end lysoutput. Direkte ledning. Føreren har fuld sikkerhedsafbrydelsesbeskyttelse i tilfælde af lysoverbelastning, åben kredsløb, kortslutning, overtemperatur eller anden fejl, automatisk genstart efter fejlen er blevet rettet dette er en listet klasse 2 strømenhed for sikkerhed og har klasse II AC indgange, fuldt isoleret tilfælde, ingen jordledning er påkrævet. Indendørs/udendørs osv. Opført til brug på tørre og fugtige steder. For at fungere korrekt skal din LED-belysning fungere på 12 volt jævnstrøm og kunne dæmpes. Denne driver fungerer godt med al 12V DC LED-båndbelysning. For andre typer LED-belysning kontakt producenten for at bekræfte, at belysningen kan dæmpes, og den fungerer på 12 volt jævnstrøm.

Beløb

Tilføj til kurv Køb nu

EAN: 0850080006528

Kategorier Værktøj og boligforbedring, Belysning & Loftsventilatorer, Belysning Accessories, Lavspændingstransformere,

Ingen minimumseffektbelastning; dæmpning fungerer lige godt, uanset om det forsyner et enkelt 3-watt LED-pucklys eller 60 watt båndbelysning eller en kombination af begge. Klasse 2 strømforsyning har overbelastningsbeskyttelse, automatisk slukning. Tilslut op til 100 % af den nominelle maksimale belastning på 60 watt – derering er ikke påkrævet. Kompatibel med både 120 Volt AC dæmpere og lysstyringer og lavspændings DC dæmpere og kontroller. Giver jævn, flimmerfri dæmpning i fuld rækkevidde til 12-volts LED-belysning såsom LED-strips, moduler, lysbjælker, puck og andre LED-accentlys.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Armacost Lighting
Capacity Description	‎60 Watt
Certification	‎UL
Color	‎White
Country of Origin	‎China
Current Rating	5 Amps
Customer Reviews	4.7 4.7 out of 5 stars 787 ratings 4.7 out of 5 stars
Included Components	‎60-Watt power supply
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	7.06 x 2.38 x 1.38 inches
Item model number	‎840600
Item Package Quantity	‎1
Item Weight	‎8 ounces
Manufacturer	‎Armacost Lighting
Material	‎Plastic
Mounting Type	Ceiling Mount
Mounting Type	‎Ceiling Mount
Number Of Pieces	‎1
Part Number	‎840600
Pattern	‎Lighting
Plug Format	‎A- US style
Power Source	AC
Power Source	‎AC
Product Dimensions	‎7.06 x 2.38 x 1.38 inches
Shape	‎Rectangular
Size	‎60 Watt
Special Features	‎Detachable AC Cord
Style	‎12 Volt
Type of Bulb	‎LED
Usage	‎ETL Listed for dry and damp location use
Voltage	‎12 Volts
Warranty Description	‎Limited 3-year warranty. This product is for dry and damp locations.
Wattage	‎60 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Skriv din anmeldelse

Din e-mail vil ikke blive offentliggjort. Alle obligatoriske felter er markeret med^*

Din vurdering

Scritto da: Thomas H.

Had to replace a unit in the kitchen, and this works perfectly

My under cabinet lights stopped working. Changed the dimmer switches, but it finally was the transformer. All good now.

Scritto da: PVM

Does what it's supposed to

Easy installation. I wired directly to a dimmer switch and it works perfectly.

Scritto da: S.C. Fluhr

Smooth dimming led driver

Quality made, nice and compact, works as advertised

Scritto da: paul

Electrician approved

One of the few LED drivers that can be dimmed in compliance with the NEC for electrical inspection. The cord that came with it can be unscrewed and the driver can be hardwired with 14-2 romex. The connections are circuit board terminal blocks on each end, so they required a jeweler screwdriver. Be sure to hold the blocks when tightening the screws, so the block doesn't torque off the circuit board. The unit does soft start and ramp to full in 1 sec. Other than that, there isn't a 3 sec delay to warm up like cheap switching power supplies have before they instantly pop on at full brightness. That's nice. I had no problem using a z-wave smart dimmer. I used the a Linear aka Nortek aka GoControl model WD500Z5 zwave dimmer and it successfully burned in so far for 1 day. It does get very warm, even pushing only 10 watts. Like a hot McDs coffee cup hot. Not too hot to start papers on fire, but too warm to be comfortable holding. Plan for that when mounting. Also, If you wired several LED homeruns instead of daisy chaining the runs, be sure to plan on wirenuts or a terminal block to connect to the driver- it only has internal room for 1 #12 pair of wires. You have no internal room for other connections. I powered 10 watts of LED under cabinet LED tape. The cables in the pic are 14-2 romex and 16-2 cl2 riser cable. No issues with those gauges.

Scritto da: Snap, Crackle and Pop

A high-quality dimmable, "universal" 120V to 12V DC LED driver power supply

The Armacost Lighting 840600 is a high quality, dimmable power supply for 12V LED fixtures or systems. COMPATIBILITY: This power supply should be compatible with a wide range of 120V dimmers. The installation instructions state the following: "Armacost Dimming LED Drivers are compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic low-voltage, ELV, and trailing edge) AC dimmers ... They are also compatible with low-voltage PWM dimmers and RGB color controllers. "Although virtually all dimmers will work with Armacost Dimmable LED Drivers, Armacost Lighting recommends dimmers that can be programmed or have an adjustment dial to set the low end dimming range." BUILT IN CONNECTORS: The built in connectors work well and quickly. They need to have some of the outer insulation to clamp onto, to keep the stress of any pull on the wire from going to the terminal connection itself. So don't strip too much of the inner or outer insulation. LOW MINIMUM POWER LOAD: The minimum power load is just 5 watts. VOLTAGE: Output is 12V DC. DIMENSIONS: It's somewhat large, at 7-1/16 inches long by 2-3/8 inches wide by 1-3/8 inches high. ENCLOSURES: If you want an enclosure, Armacost makes variations with enclosures for conduit connections. The only real negative is the cost, though of course having a high-performing, high quality power supply makes it a reasonable value. Lower-watt drivers are less expensive than this one. The manufacturer's website has lots more info, including specs and installation instruction. TWO WARNINGS: First, be sure to get a power supply rated with enough watts to cover your needs. Second, be careful to get a power supply with the right input voltage. Armacost makes a line of 12V dimmers and matching power supplies. This product is the universal power supply, to be used with a range of dimmers and 120V.

Scritto da: CAMPFIRESKY

NEW KITCHEN SINK LIGHTING

Very easy to install. I hard wired the power pack and also installed a dimmer switch. Works perfectly with no humming. Great product.

Scritto da: Kindle Customer

Everything I wanted at a reasonable price

Put in a dimmer switch and get the 120 leds per meter. You can crank it up to give all the light you will ever need and yet dim it down to simply add ambience to your kitchen. I installed them in the channel with the diffusers and absolutely love them.

Scritto da: Nick

It actually works with a dimmer!!

Wow an LED driver / power supply that actually dims the LEDs!!! I thought there was something wrong with my LEDs or dimmer as I tried two different PLUSPOE dimmers that did not actually dim anything and also buzzed. This driver actually works, and works well. I am using the 12v/24watt one to drive 8x half moon 12v LED stair lights. I am also using a Leviton 6674 dimmer in the wall. There is no switching noise from this driver, the construction is solid and the dimming is smooth without flicker. Completely worth the higher price than non certified drivers. The only thing that was odd is that it did not come with a power cord. The lack of a power cord was not a big deal as I had one laying around, but I could see it bothering other people. I have a light switch controlling half of a receptacle in low voltage box, so I did need one.